Chicago Electric 97427 - Manuals

Page 2 - SAVE ThIS MANUAL; IMpORTANT SAFETY; general Safety Rules; Cluttered or dark areas invite; DANgER; Notice; cAUTION

Page 2 SKU 97427 For technical questions, please call 1-800-444-3353. SAVE ThIS MANUAL K e e p t h i s m a n u a l f o r t h e s a f e t y warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near ...

Page 3 - personal safety; tired or under the influence of drugs,; power tool use and care

Page 3 SKU 97427 For technical questions, please call 1-800-444-3353. outlets will reduce risk of electric shock. Avoid body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose powe...

Page 4 - Service; a qualified repair person using only; Vibration hazard; first be examined by a doctor and

Page 4 SKU 97427 For technical questions, please call 1-800-444-3353. the risk of starting the power tool accidentally. Store idle power tools out of the d. reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dang...

Page 5 - Specific Safety Rules

Page 5 SKU 97427 For technical questions, please call 1-800-444-3353. Specific Safety Rules Maintain labels and nameplates on 1. the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.Always examine the workpiece for 2. foreign ob...

Page 6 - SAVE ThESE; gROUNDINg; Check with a qualified; grounded Tools: Tools with Three; Required” have a three wire cord; WARNINg

Page 6 SKU 97427 For technical questions, please call 1-800-444-3353. approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq. ) The warnings, precautions, 16. and instructions discuss...

Page 7 - Outlets for 2-prong plug; Extension cords; Grounded

Page 7 SKU 97427 For technical questions, please call 1-800-444-3353. Double Insulated Tools: Tools with Two prong plugs Outlets for 2-prong plug 1. Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies w...

Page 8 - SpEcIFIcATIONS; UNpAckINg; Assembly; (with flat face of shank facing the

Page 8 SKU 97427 For technical questions, please call 1-800-444-3353. SpEcIFIcATIONS Electrical Requirements 120 V~ / 60 Hz 3.55 No Load Amps / 710 Watts Power Plug Type: 2-Prong, Polarized Power Switch Type: Lockable for continuous run Motor RPM 16,500 Drill Bit Diameter 1/4” (Qty 2)Maximum Drillin...

Page 9 - OpERATINg INSTRUcTIONS

Page 9 SKU 97427 For technical questions, please call 1-800-444-3353. Loosen the Screw (47), and set the 2. cutting depth by sliding the Depth Tab (48) along the Depth Ruler (49). (See Figure B.) Retighten the Knob Screw (47) to 3. lock the adjustment in place. (See Figure B.) MOTOR BASE (16) knob S...

Page 10 - When finished cutting, move the; MAINTENANcE & SERVIcINg

Page 10 SKU 97427 For technical questions, please call 1-800-444-3353. To turn off the Dowel Jointer, move 3. the Power Switch (74) all the way backward. (See Figure E.) FIgURE E pOWER SWITch (74) To Mark The Workpiece : Before starting with the Dowel Jointer, 1. the workpieces must be marked as fol...

Page 11 - cleaning; be replaced only by a qualified; TROUBLEShOOTINg; pLEASE READ ThE FOLLOWINg cAREFULLY

Page 11 SKU 97427 For technical questions, please call 1-800-444-3353. TO pREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Inspection, Maintenance, and cleaning BEFORE EAch USE, 1. inspect th...

Page 12 - pARTS LIST

Page 12 SKU 97427 For technical questions, please call 1-800-444-3353. pARTS LIST No Specifications Qty 1 cross sunk-head screw M4×6 2 2 front plate 1 3 angle stop 1 4 orientation block 1 5 washer 4 9 6 cross panhead screw M4×8 3 7 hexagon bolt M5×25 1 8 guide plate 1 9 fixing spring 1 10 lock clamp...

Page 13 - ASSEMBLY DIAgRAM

Page 13 SKU 97427 For technical questions, please call 1-800-444-3353. ASSEMBLY DIAgRAM

Page 14 - LIMITED 1 YEAR / 90 DAY WARRANTY; THIS

Page 14 SKU 97427 For technical questions, please call 1-800-444-3353. LIMITED 1 YEAR / 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of ninety days from dat...