Chicago Electric 96952 - Manuals

Page 2 - saVe this Manual; iMportant saFetY inForMation; danger; Notice; caution

Page 2 SKU 96952 For technical questions, please call 1-800-444-3353. saVe this Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - general saFetY rules

Page 3 SKU 96952 For technical questions, please call 1-800-444-3353. general saFetY rules warning! read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to the...

Page 4 - service; speciFic saFetY rules

Page 4 SKU 96952 For technical questions, please call 1-800-444-3353. Do not overreach. Keep proper footing and balance at all times. d. This en- ables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, cloth- e. ing and ...

Page 5 - saVe these instructions.; grounding; Check with a qualified electrician if you are in doubt as to; warning

Page 5 SKU 96952 For technical questions, please call 1-800-444-3353. Follow instructions provided with solvents. 4. Use only in well-ventilated area. Locate washer at least 18 inches above floor. 5. 6. Do not expose to combustible fumes. Washer has internal arcing or sparking parts that can cause i...

Page 6 - grounded tools: tools with three prong plugs; -prong plug and outlet; double insulated tools: tools with two prong plugs; extension cords

Page 6 SKU 96952 For technical questions, please call 1-800-444-3353. grounded tools: tools with three prong plugs Tools marked with “Grounding Required” have a three wire cord and three prong 1. grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electricall...

Page 7 - recoMMended MiniMuM wire gauge For eXtension cords*; symbology

Page 7 SKU 96952 For technical questions, please call 1-800-444-3353. The smaller the gauge number of the wire, the greater the capacity of the cord. 3. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (see table a.) When using more than one extension cord to make up the...

Page 8 - speciFications; unpacKing; operating instructions; read the entire iMportant saFetY inForMation section at the; Do not use any highly volatile, flammable or; Parts being cleaned may contain and leave flammable; this parts washer is intended for use only as a plastic

Page 8 SKU 96952 For technical questions, please call 1-800-444-3353. speciFications Electrical Requirements 120 V~ / 60 Hz / 0.27A Maximum Flow 317 Gallons per Hour Power Cord 18AWGX3C unpacKing When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or br...

Page 9 - Maintenance and serVicing; replaced only by a qualified service technician.

Page 9 SKU 96952 For technical questions, please call 1-800-444-3353. Once all parts have been cleaned, turn the Power Switch off and unplug the elec- 6. trical cord. Dispose of the solvent as required by any State, local, or Federal guidelines and 7. regulations. See the directions on the solvent, ...

Page 10 - please read the Following careFullY; parts list; part

Page 10 SKU 96952 For technical questions, please call 1-800-444-3353. please read the Following careFullY THE MANUFACTURER AND/OR DISTRIbUTOR HAS PROVIDED THE PARTS LIST AND ASSEMbLy DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIbUTOR MAkES ANy REPRESENTATION OR...

Page 11 - asseMBlY diagraM; record

Page 11 SKU 96952 For technical questions, please call 1-800-444-3353. asseMBlY diagraM record product’s serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able...

Page 12 - liMited 90 daY warrantY

Page 12 SKU 96952 For technical questions, please call 1-800-444-3353. liMited 90 daY warrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod - uct is free from defects in mater...