Chicago Electric 96448 - Manuals

Chicago Electric 96448 – Manual in PDF format online.

Manuals:

Manual

Manual Chicago Electric 96448

Summary

Page 2 - Contents

Page 2 SKU 96448 For technical questions, please call 1-800-444-3353. Contents important saFetY inFormation ............................ 3 general saFetY rules ................................................. 4 work area .................................................................................

Page 3 - saVe this manual; important saFetY inFormation; DANger

Page 3 SKU 96448 For technical questions, please call 1-800-444-3353. saVe this manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 4 - general saFetY rules; The term “power tool” in all of the warnings listed

Page 4 SKU 96448 For technical questions, please call 1-800-444-3353. general saFetY rules warning! read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to you...

Page 5 - power tool use and care; Do not use the power tool if the Trigger does not turn it on and off.; disconnect the battery pack from the power tool before making any; Power tools are dangerous in the hands of untrained users.; service; cal replacement parts.; speCiFiC saFetY rules

Page 5 SKU 96448 For technical questions, please call 1-800-444-3353. Do not overreach. Keep proper footing and balance at all times. d. this en- ables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, cloth- e. ing and ...

Page 6 - especially avoid placing the charger on carpets and rugs they; This product is not a toy. Keep it out of reach of children.

Page 6 SKU 96448 For technical questions, please call 1-800-444-3353. Do not lay the tool down until it has come to a complete stop. Moving parts can 3. grab the surface and pull the tool out of your control. When using a handheld power tool, maintain a firm grip on the tool with both 4. hands to re...

Page 7 - saVe these instruCtions.; grounding; Check with a qualified electrician if you are in doubt as to; grounded tools: tools with three prong plugs; to an electrically “live” terminal.; WArNINg

Page 7 SKU 96448 For technical questions, please call 1-800-444-3353. Only use the included battery to power the Inpact Wrench. Never attempt to use 11. a battery from any other powered tool in place of the battery for this tool.The warnings, precautions, and instructions discussed in this instructi...

Page 8 - double insulated tools: tools with two prong plugs; dard Association, and the National electrical Code.; extension Cords; Grounded

Page 8 SKU 96448 For technical questions, please call 1-800-444-3353. 3-prong plug and outlet outlets for 2-prong plug double insulated tools: tools with two prong plugs Tools marked “Double Insulated” do not require grounding. They have a special 1. double insulation system which satisfies OSHA req...

Page 9 - symbology

Page 9 SKU 96448 For technical questions, please call 1-800-444-3353. Make sure the extension cord is properly wired and in good electrical condition. 7. Always replace a damaged extension cord or have it repaired by a qualified elec - trician before using it.Protect the extension cords from sharp o...

Page 10 - speCiFiCations; unpaCking; on the cover of this manual as soon as possible.; list of contents; set up instruCtions; to the Assembly Diagram near the end of this manual.; tool Features; electrical outlet prior to making any adjustments to the tool.

Page 10 SKU 96448 For technical questions, please call 1-800-444-3353. speCiFiCations Charger Input 120 V~, 60 Hz, 1.8 A Charger Output 7.2 - 24 V, 1.5 A Charge Time 1-3/4 - 2 Hours. Speed 0-2300 rPM Maximum Torque 220 ft-lb Battery Cell Type NiCd, 1700 mAh, 1.2 V, Item 96756 unpaCking When unpackin...

Page 11 - Figure a; Charging

Page 11 SKU 96448 For technical questions, please call 1-800-444-3353. trigger (36): Squeeze the Trigger to turn the Impact Wrench on and release pressure on the Trigger to turn the Impact Wrench off. Forward/reverse switch (32): The Forward/reverse Switch allows you to change the rotational directi...

Page 12 - note; after use. Clean, then store the tool indoors out of children’s reach.; operating instruCtions; read the entire important saFetY inFormation section at the; general operating instructions

Page 12 SKU 96448 For technical questions, please call 1-800-444-3353. When the Battery requires recharging, a 1-3/4 hour charge allows the tool to op - 3. erate at full power. Do not recharge the Battery longer than 2 hours, as damage to the Battery and/or Impact Wrench will occur. Slide the Batter...

Page 13 - dren and other unauthorized people.; maintenanCe and serViCing; Cleaning and maintenance; inspect the general condition of the tool. Check for loose; replaced only by a qualified service technician.; same holders and orientation as when they were removed.

Page 13 SKU 96448 For technical questions, please call 1-800-444-3353. When finished, release the Trigger to stop the Impact Wrench. Then, remove the 7. Battery and socket from the tool. Make sure to store the Impact Wrench in a dry, clean location out of reach of chil- 8. dren and other unauthorize...

Page 14 - troubleshooting; problem

Page 14 SKU 96448 For technical questions, please call 1-800-444-3353. When installing the Carbon Brushes, make sure the carbon portion of the Carbon 4. Brushes contact the Motor’s rotor and that the springs face away from the Motor. Also, make sure the springs operate freely. After replacement or c...

Page 15 - please read the Following CareFullY; parts list; part

Page 15 SKU 96448 For technical questions, please call 1-800-444-3353. please read the Following CareFullY THe MANUFACTUrer AND/Or DISTrIBUTOr HAS PrOVIDeD THe PArTS LIST AND ASSeMBLY DIAgrAM IN THIS MANUAL AS A reFereNCe TOOL ONLY. NeITHer THe MANUFACTUrer Or DISTrIBUTOr MAKeS ANY rePreSeNTATION Or...

Page 16 - assemBlY diagram; record; able individually as replacement parts.

Page 16 SKU 96448 For technical questions, please call 1-800-444-3353. assemBlY diagram record product’s serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able...

Page 17 - limited 90 daY warrantY; WArrANTIeS OF MerCHANTABILITY AND FITNeSS.

Page 17 SKU 96448 For technical questions, please call 1-800-444-3353. limited 90 daY warrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod - uct is free from defects in mater...