Chicago Electric 96405 - Manuals

Chicago Electric 96405 – Manual in PDF format online.

Manuals:

Manual

Manual Chicago Electric 96405

Summary

Page 2 - conTenTs

Page 2 SKU 96405 For technical questions, please call 1-800-444-3353. conTenTs iMporTanT saFeTY inForMaTion ............................ 3 general saFeTY rules ................................................. 3 work area .................................................................................

Page 3 - saVe This Manual; iMporTanT saFeTY inForMaTion

Page 3 SKU 96405 For technical questions, please call 1-800-444-3353. saVe This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 4 - general saFeTY rules; presence of flammable liquids, gases or dust.

Page 4 SKU 96405 For technical questions, please call 1-800-444-3353. general saFeTY rules warning! read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to you...

Page 5 - Carrying power tools with your finger on the switch or plugging in; power tool use and care; Always plug this tool into a GFCI equipped 120V electrical outlet.; or storing power tools.; Such preventive safety measures reduce the; store idle power tools out of the reach of children and do not allow; Power tools are dangerous in the hands of untrained

Page 5 SKU 96405 For technical questions, please call 1-800-444-3353. Avoid accidental starting. Ensure the switch is in the “OFF” position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. Remove any adjusti...

Page 6 - service; identical replacement parts.; speciFic saFeTY rules; to avoid falling branches.

Page 6 SKU 96405 For technical questions, please call 1-800-444-3353. service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained . speciFic saFeTY rules Only use the Pole Saw to cut wood....

Page 7 - kickback precautions; keep the cutting job free from accident or injury:

Page 7 SKU 96405 For technical questions, please call 1-800-444-3353. pacemaker failure. People with pacemakers should consult their physician(s) for advice.Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of Ca...

Page 8 - Page; saVe These insTrucTions.; grounding; Check with a qualified electrician if you are in doubt as to; grounded Tools: Tools with Three prong plugs; to an electrically “live” terminal.

Page SKU 96405 For technical questions, please call 1-800-444-3353. understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. saVe These insTrucTions. grounding improperly connecting the grounding wire can resu...

Page 9 - double insulated Tools: Tools with Two prong plugs; Standard Association, and the National Electrical Code.; extension cords; Grounded

Page 9 SKU 96405 For technical questions, please call 1-800-444-3353. double insulated Tools: Tools with Two prong plugs Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards...

Page 10 - symbology

Page 10 SKU 96405 For technical questions, please call 1-800-444-3353. recoMMended MiniMuM wire gauge For eXTension cords* (120/240 VolT) naMeplaTe aMperes (at full load) eXTension cord lengTh 25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 0 – 2.0 1 1 1 1 16 2.1 – 3.4 1 1 1 16 14 3.5 – 5.0 1 1 16 14 12 5...

Page 11 - speciFicaTions; unpacking; on the cover of this manual as soon as possible.; seT up insTrucTions; to the Assembly Diagram near the end of this manual.; assembly; with a high-quality chain saw oil before each use.

Page 11 SKU 96405 For technical questions, please call 1-800-444-3353. speciFicaTions Electrical Requirements 120 V~ / 60 Hz Motor No Load Amperage 3.5<->4.0 AMPS Blade ” (Cutting Capacity = 6.7”) Chain Speed 3149 Feet Per Minute Chain Specs Pitch: 3/” Gauge” 0.043” Center Links 33 Oil Capacit...

Page 12 - quality chain saw oil. Replace Oil Cap when full.; Chain; must; Functions; The Telescoping Pole Saw is designed to trim branches on trees.

Page 12 SKU 96405 For technical questions, please call 1-800-444-3353. Always turn the Power Switch of the Pole Saw to the “OFF” position, unplug it from the outlet, and allow it to cool down completely before adding oil. To fill the Oil Tank (42), remove the Oil Cap (41) and add up to 5 Ounces of h...

Page 13 - operaTing insTrucTions; read the enTire iMporTanT saFeTY inForMaTion section at the; general operating instructions; moving or using unit.

Page 13 SKU 96405 For technical questions, please call 1-800-444-3353. operaTing insTrucTions read the enTire iMporTanT saFeTY inForMaTion section at the beginning of this manual including all text under subheadings therein before set up or use of this product. general operating instructions Turn th...

Page 15 - MainTenance and serVicing; inspect the general condition of the tool. Check for; manual MUST be completed by a qualified; Troubleshooting

Page 15 SKU 96405 For technical questions, please call 1-800-444-3353. MainTenance and serVicing risk of serious personal injury from accidental starting or electric shock. Turn the power switch of the tool to its “oFF” position and unplug the tool from its electrical outlet before performing any in...

Page 16 - please read The Following careFullY

Page 16 SKU 96405 For technical questions, please call 1-800-444-3353. problem possible causes probable solutions Pole Saw runs slowly and stalls easily Power supply receiving low voltage. 1. Extension cord wire size is too small. 1. Pole Saw does not run when Power Switch is depressed. Safety Switc...

Page 17 - available individually as replacement parts.; parTs lisT

Page 17 SKU 96405 For technical questions, please call 1-800-444-3353. part description 1 Screw ST 4x1 2 Plastic End Cap 3 Screw M5x5 4 Spring Washer 5 Washer x4.2x0.6 6 Carbon Brush Housing 7 Carbon Brush Nut M4 9 Motor Housing 10 Stator 11 Plastic Plate 12 Rotor Assembly 13 Screw M4x65 14 Key 15 G...

Page 18 - asseMblY diagraM

Page 1 SKU 96405 For technical questions, please call 1-800-444-3353. asseMblY diagraM

Page 19 - liMiTed 90 daY warranTY; WARRANTIES OF MERCHANTABILITY AND FITNESS.

Page 19 SKU 96405 For technical questions, please call 1-800-444-3353. liMiTed 90 daY warranTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod - uct is free from defects in mater...