Chicago Electric 96298 - Manuals

Page 2 - PRODUCT SPECifiCATiONS; Save This Manual; GENERAL SAfETy RULES; READ AND UNDERSTAND ALL iNSTRUCTiONS; Work Area

SKU 96298 for technical questions, please call 1-800-444-3353. PAGE 2 PRODUCT SPECifiCATiONS Power Source 1.3Ah Battery Charge Time 5-7 Hours, after initial charge Charger Input 120V ~60Hz Chuck Type 1/4” Hex Shank Drive Torque Settings 24 Variable Speed 0-500 RPM Maximum Torque 80 in./lb. Reversibl...

Page 4 - Service; SPECifiC SAfETy RULES

SKU 96298 for technical questions, please call 1-800-444-3353. PAGE 4 Remove the battery from the tool and set the Rotation button (6) to the cen-ter, locked position, before making any adjustments, changing accessories, or storing the tool. These preventive safety measures reduce the risk of starti...

Page 6 - GROUNDiNG; GROUNDED TOOLS: TOOLS WiTH THREE PRONG PLUGS; fiGURE A; DOUbLE iNSULATED TOOLS: TOOLS WiTH TWO PRONG PLUGS

SKU 96298 for technical questions, please call 1-800-444-3353. PAGE 6 GROUNDiNG WARNiNG! improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power co...

Page 7 - ExTENSiON CORDS; Grounded

SKU 96298 for technical questions, please call 1-800-444-3353. PAGE 7 Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See figure b.) ExTENSiON CORDS Grounded tools require a three wire extension cord. Double Insulated tools can use either a ...

Page 8 - RECOMMENDED MiNiMUM WiRE GAUGE fOR ExTENSiON CORDS*; NAMEPLATE; Chart A; SyMbOLOGy

SKU 96298 for technical questions, please call 1-800-444-3353. PAGE 8 RECOMMENDED MiNiMUM WiRE GAUGE fOR ExTENSiON CORDS* (120 OR 240 VOLT) NAMEPLATE AMPERES (at full load) ExTENSiON CORD LENGTH 25 feet 50 feet 75 feet 100 feet 150 feet 0 – 2.0 18 18 18 18 16 2.1 – 3.4 18 18 18 16 14 3.5 – 5.0 18 18...

Page 9 - UNPACKiNG

SKU 96298 for technical questions, please call 1-800-444-3353. PAGE 9 UNPACKiNG When unpacking, check to make sure that the product is complete and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. CHA...

Page 10 - OPERATiNG iNSTRUCTiONS; the; Never insert one of the included bits (26) directly; damage the Cordless Driver.

SKU 96298 for technical questions, please call 1-800-444-3353. PAGE 10 OPERATiNG iNSTRUCTiONS NOTE: For additional information regarding the parts listed in the following pages, refer to the Parts List & Assembly Diagram. WARNiNG! Remove the Battery Pack (19) from the tool and set the Rotation B...

Page 14 - which vary from state to state.; Record Product’s Serial Number Here:; individually as replacement parts.

SKU 96298 for technical questions, please call 1-800-444-3353. PAGE 14 PLEASE READ THE fOLLOWiNG CAREfULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR...