Page 2 - SAVE THIS MANUAL; IMpORTANT SAFETY INFORMATION; dANGER; NOTiCe; CAUTION
Page 2 SKU 96289 For technical questions, please call 1-800-444-3353. SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...
Page 3 - GENERAL SAFETY RULES
Page 3 SKU 96289 For technical questions, please call 1-800-444-3353. GENERAL SAFETY RULES WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to you...
Page 4 - SpECIFIC SAFETY RULES
Page 4 SKU 96289 For technical questions, please call 1-800-444-3353. Avoid accidental starting. ensure the switch is in the off-position before c. plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. Do not overreach....
Page 7 - SAVE THESE INSTRUCTIONS.; GROUNdING; Check with a qualified electrician if you are in doubt as to; WARNING
Page 7 SKU 96289 For technical questions, please call 1-800-444-3353. Do not drop the Heat Gun as the heating elements may be damaged. 13. People with pacemakers should consult their physician(s) before use. 14. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker inter...
Page 8 - Grounded Tools: Tools with Three prong plugs; -prong plug and Outlet; double Insulated Tools: Tools with Two prong plugs; Extension Cords
Page 8 SKU 96289 For technical questions, please call 1-800-444-3353. Grounded Tools: Tools with Three prong plugs Tools marked with “Grounding Required” have a three wire cord and three prong 1. grounding plug. The plug must be connected to a properly grounded outlet. if the tool should electricall...
Page 9 - RECOMMENdEd MINIMUM WIRE GAUGE FOR EXTENSION CORdS*; Symbology
Page 9 SKU 96289 For technical questions, please call 1-800-444-3353. The smaller the gauge number of the wire, the greater the capacity of the cord. 3. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Table A.) When using more than one extension cord to make up the...
Page 10 - SpECIFICATIONS; UNpACKING; SET Up INSTRUCTIONS; OpERATING INSTRUCTIONS
Page 10 SKU 96289 For technical questions, please call 1-800-444-3353. SpECIFICATIONS electrical Requirements 120 V~ / 60 Hz / 1500 Watts (12.5 Amps (Peak) Power Cord: 16 AWG x 2C / 6’ Long Power Plug: 2-Prong / Class 2 Double insulated: Yes Power Switch: ON/OFF / 3 Position Switch Adjustable Heat S...
Page 11 - product Applications; product Features; FIGURE A
Page 11 SKU 96289 For technical questions, please call 1-800-444-3353. product Applications When observing the safety rules, this Heat Gun is designed for all applications 1. with hot air that are listed below: Shrinking of shrinkdown tubing, solder connectors and solder terminals, • packaging and e...
Page 12 - General Operating procedures; MAINTENANCE ANd SERVICING
Page 12 SKU 96289 For technical questions, please call 1-800-444-3353. General Operating procedures Make sure the Power Switch (3) is in its 1. “0” (OFF) position. Then plug the Pow- er Cord (1) of the tool into the nearest 120 volt, grounded, electrical outlet. (See Figure A, previous page.) To tur...
Page 13 - Troubleshooting; pARTS LIST
Page 13 SKU 96289 For technical questions, please call 1-800-444-3353. AFTER USE, 3. clean the external surfaces of the tool with a clean, moist cloth and mild detergent. Then dry. Do not use solvents. CAUTION! 4. All maintenance, service, and repairs not mentioned in this manual must only be perfor...
Page 14 - ASSEMBLY dIAGRAM
Page 14 SKU 96289 For technical questions, please call 1-800-444-3353. ASSEMBLY dIAGRAM
Page 15 - LIMITEd 90 dAY WARRANTY
Page 15 SKU 96289 For technical questions, please call 1-800-444-3353. Record product’s Serial Number Here: Note: if product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as re...