Chicago Electric 9624 - Manuals

Page 2 - SAVE ThIS MAnuAL; Keep this manual for the safety warnings; IMpORTAnT SAFETY; general power Tool Safety Warnings; The term ′′power tool′′ in the warnings; the presence of flammable liquids,; Power tools create

Page 2 For technical questions, please call 1-800-444-3353. SKU 9624 SAVE ThIS MAnuAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram ...

Page 3 - under the influence of drugs, alcohol; Safety

Page 3 For technical questions, please call 1-800-444-3353. SKU 9624 ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain c. or wet conditions. Water entering a power tool will increase the risk of electric shock. Do not a...

Page 4 - with the switch is dangerous and must; qualified repair person using only; This will; Screwdriver and Impact Wrench

Page 4 For technical questions, please call 1-800-444-3353. SKU 9624 with the switch is dangerous and must be repaired. Disconnect the plug from the power c. source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventiv...

Page 5 - Vibration Safety

Page 5 For technical questions, please call 1-800-444-3353. SKU 9624 grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock. WARNING: Some dust created by power 9. sanding, sawing, grinding, drilling, and other construction activities, c...

Page 6 - SAVE ThESE; gROunDIng; Check with a qualified electrician; grounded Tools: Tools with Three; -prong plug and Outlet; Double Insulated Tools: Tools with; Outlets for 2-prong plug; double insulation system which satisfies

Page 6 For technical questions, please call 1-800-444-3353. SKU 9624 SAVE ThESE InSTRuCTIOnS. gROunDIng TO pREVEnT ELECTRIC ShOCK AnD DEATh FROM InCORRECT gROunDIng WIRE COnnECTIOn: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify th...

Page 7 - Extension Cords; Grounded; Symbology

Page 7 For technical questions, please call 1-800-444-3353. SKU 9624 Extension Cords Grounded 1. tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet 2. increases, you must use a heavier gauge exte...

Page 8 - SpECIFICATIOnS; unpACKIng; When unpacking, make sure that the; ASSEMBLY InSTRuCTIOnS; For additional information regarding; To Change Bit Tip holders:; Pull forward on the Depth Collar (2) and; FIguRE A

Page 8 For technical questions, please call 1-800-444-3353. SKU 9624 SpECIFICATIOnS Electrical Input 120 V~ / 60 Hz / 4.2 A (Rated) Motor Speed 2250 RPM (No Load) VSR Drive 1/4” Hex Additional Features All Ball Bearing Construction Trigger Lock Switch Metal Gear HousingRemovable & Adjustable Dep...

Page 9 - OpERATIng InSTRuCTIOnS; To start the Drywall Screwdriver, depress; FIguRE B

Page 9 For technical questions, please call 1-800-444-3353. SKU 9624 To Change The Bit: Pull forward on the Depth Collar (2) and 1. remove it from the Clutch Housing (5). (See Figure A.) Pull the Bit (3) straight out with pliers if it 2. is difficult to remove. (See Figure A.) Push the new Bit (3) i...

Page 10 - AnD CLEAnIng; Do not use damaged equipment.; pLEASE READ ThE

Page 10 For technical questions, please call 1-800-444-3353. SKU 9624 InSpECTIOn, MAInTEnAnCE, AnD CLEAnIng TO pREVEnT SERIOuS InJuRY FROM ACCIDEnTAL OpERATIOn: unplug the power Cord (43) from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. BEFORE EACh uS...

Page 11 - pARTS LIST AnD DIAgRAM

Page 11 For technical questions, please call 1-800-444-3353. SKU 9624 pARTS LIST AnD DIAgRAM part Description 1 Locator 2 Depth Collar 3 Bit 4 Bit Tip Holder 5 Clutch Housing 6 Shaft Seal 7 Spindle 8 Steel Ball 9 Clutch 10 Retaining Ring 11 Guide 12 Spring 13 Bearing Retainer 14 Ball Bearing 15 Gear...

Page 12 - LIMITED 90 DAY WARRAnTY; Harbor Freight Tools Co. makes every; Record product’s Serial number here:; individually as replacement parts.

Page 12 For technical questions, please call 1-800-444-3353. SKU 9624 LIMITED 90 DAY WARRAnTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials...