Chicago Electric 95887 - Manuals

Page 2 - sPeCifiCations; save this Manual; general safety rules; read and understand all instruCtions; work area; keep your work area clean and well lit.; Cluttered benches and dark areas invite

Page 2 SKU 95887 for technical questions, please call 1-800-444-3353. sPeCifiCations Voltage 230 Volts AC Frequency 60 Hz Amperage @ Maximum 6.2 A Wattage 500 Watts Heaters Single 500 Watt Heater Block Cord Rating/Listing 14AWG X 3C Plug type No plug included. Oven must be wired to an appropriate 23...

Page 3 - eleCtriCal safety; use only indoors, do not expose to rain or wet conditions.; Personal safety

Page 3 SKU 95887 for technical questions, please call 1-800-444-3353. always use eye, hand and body protection. Always wear ANSI-approved safety goggles or full face shield and dust mask/respirator. Always wear fire retardant, heat proof work gloves, a full length fire retardant apron, long sleeve s...

Page 4 - sPeCifiC safety rules

Page 4 SKU 95887 for technical questions, please call 1-800-444-3353. tool use and Care do not use this oven if the Power switch does not turn it on or off. If the Powder Coat Oven cannot be controlled with the Power Switch, it is dangerous and must be replaced. disconnect the Power Cord Plug from t...

Page 5 - neVer atteMPt to MoVe tHe oVen wHile it is Hot.; Electromagnetic fields in close proximity to a heart pacemaker; grounding

Page 5 SKU 95887 for technical questions, please call 1-800-444-3353. table or stand is flat, level, sturdy and capable of supporting both the weight of the Oven and all objects placed inside for baking. neVer atteMPt to MoVe tHe oVen wHile it is Hot. dress safely. To avoid accidental burns, always ...

Page 6 - eXtension Cords; reCoMMended MiniMuM wire gauge for eXtension Cords*; syMbology

Page 6 SKU 95887 for technical questions, please call 1-800-444-3353. eXtension Cords As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and pos...

Page 7 - Make sure the Power Switch of the tool is in its “OFF” position; Power Plug; oPeration instruCtions

Page 7 SKU 95887 for technical questions, please call 1-800-444-3353. unPaCking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. asseMbly...

Page 8 - do not use damaged equipment.; A commercial grade thermometer (not included)

Page 8 SKU 95887 for technical questions, please call 1-800-444-3353. Depending on the Thermostat (3) setting, it may take up to one hour for the Oven temperature to reach the desired setting and stabilize within an allowable + or - 10 degree range. Periodically check the Thermometer (9) to make sur...

Page 10 - liMited 90 day warranty; which vary from state to state.

Page 10 SKU 95887 for technical questions, please call 1-800-444-3353. on the Thermostat (3). If it does exceed the 10° F, a qualified technician should check the Thermostat (3), Blower Motor (7), Fan Blades (8) and Heaters (4) for proper operation. note: after any, or all of these tests, be sure to...

Page 11 - troublesHooting; Problem; Please read tHe following Carefully; record; individually as replacement parts.

Page 11 SKU 95887 for technical questions, please call 1-800-444-3353. troublesHooting Problem Possible Causes Probable solutions Oven will not turn on, Heaters will not start, Fan will not operate. No power at outlet.Cord not connected.Cord is damaged or broken. Circuit breaker has tripped. 1.2.3. ...