Chicago Electric 95848 - Manuals

Page 2 - PRODUCT SPECIfICATIONS; Save This Manual; GENERAL SAfETy RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; Work Area; Keep your work area clean and well lit.; Cluttered benches and dark areas; Keep bystanders and children away while operating a power tool.; Distractions; Electrical Safety

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 2 PRODUCT SPECIfICATIONS Power Source 18 VDC, 1.3Ah, NiCd Battery Charge Time 1 Hour Charger Input 120 VAC / 60 Hz / 1.8A Chuck Type 1/2” Single Sleeve Keyless Torque Settings 16 Variable Speed 0-900 RPM Maximum Torque 6 ft./lb. Rev...

Page 3 - Do not expose power tools to rain or wet conditions.; Personal Safety; Do not overreach. Keep proper footing and balance at all times.

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 3 prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, g...

Page 4 - Tool Use and Care; Do not force the tool. Use the correct tool for your application.; Service; SPECIfIC SAfETy RULES; Maintain a safe working environment.

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 4 Tool Use and Care Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force ...

Page 6 - People with pacemakers should consult their physician(s) before; GROUNDING; GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS; fIGURE A

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 6 designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.) WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment ...

Page 7 - Grounded

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 7 DOUbLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards...

Page 8 - RECOMMENDED MINIMUM WIRE GAUGE fOR ExTENSION CORDS*; NAMEPLATE; fIGURE C; SyMbOLOGy

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 8 RECOMMENDED MINIMUM WIRE GAUGE fOR ExTENSION CORDS* (120 OR 240 VOLT) NAMEPLATE AMPERES (at full load) ExTENSION CORD LENGTH 25 feet 50 feet 75 feet 100 feet 150 feet 0 – 2.0 18 18 18 18 16 2.1 – 3.4 18 18 18 16 14 3.5 – 5.0 18 18...

Page 10 - OPERATING INSTRUCTIONS; the; Assembly Diagram; Remove the Battery (28) from the tool and set the Rotation Button

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 10 OPERATING INSTRUCTIONS NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 13 . WARNING! Remove the Battery (28) from the tool and set the Rotation Button (9) ...

Page 11 - Use the Drill torque setting, as described above.

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 11 to prevent damage to the screw, bit, or workpiece. The higher the number, the more torque is applied before the clutch slips. Unless you are drilling, always start with a lower number to help prevent damage. This drill also has t...

Page 12 - Do not use damaged equipment.; Do not immerse the Cordless Drill in any liquids.

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 12 Drill only as deep as necessary. Do not drill deeper than necessary into walls or other areas where you cannot identify any possible hazards behind the drilling surface. To reduce jamming as the Bit breaks through the workpiece, ...

Page 13 - PARTS LIST; ASSEMbLy DIAGRAM

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 13 PARTS LIST ASSEMbLy DIAGRAM Part Description QTy 1 Screw 2 2 Sticker 1 3 2-Head Bit 1 4 Plate 1 5 Battery Indicator Button 1 6 Bit Clamp 1 7 Battery Indicator PCB 1 8 Left Shell 1 9 Rotation Button 1 10 Trigger 1 11 R/R Indicator...

Page 14 - PLEASE READ THE fOLLOWING CAREfULLy; LIMITED 90 DAy WARRANTy; which vary from state to state.; Record; individually as replacement parts.

SKU 95848 for technical questions, please call 1-800-444-3353. PAGE 14 PLEASE READ THE fOLLOWING CAREfULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR...