Page 2 - Page 2; SpECIFICATIOnS; Save This Manual; GEnERAL SAFETy RuLES; Work Area; the presence of flammable liquids,; Electrical Safety; plugs. Check with a qualified electri; fit in a polarized outlet only one way.; If the plug does not fit fully in the outlet,
SKU 95065 For technical questions, please call 1-800-444-3353 Page 2 SpECIFICATIOnS Batteries 4.8 V NiCd Battery Pack Charging Time No more than 10 hours Charger Adapter Input: 120 VAC, 60 Hz Output: 6 VDC, 300 mA Speed 200 RPM Chuck Hex drive Features 6 – Driver bits included Save This Manual Keep ...
Page 3 - Page 3; personal Safety; power tool while tired or under the influ; Tool use and Care
SKU 95065 For technical questions, please call 1-800-444-3353 Page 3 When operating a power tool out- side, use an outdoor extension cord marked “W-A” or “W”. These exten- sion cords are rated for outdoor use, and reduce the risk of electric shock. personal Safety Stay alert. Watch what you are do- ...
Page 4 - Page 4; Service; qualified repair personnel.; performed by unqualified personnel; VIBRATIOn HAzARD; or for an extended period should first; SpECIFIC SAFETy RuLES; a power tool in areas near flammable
SKU 95065 For technical questions, please call 1-800-444-3353 Page 4 Service Tool service must be performed by qualified repair personnel. Service performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in ...
Page 5 - Page 5; Electromagnetic fields; GROunDInG; Check with a qualified; Tools with Three prong plugs; double insulation system which satisfies; WARnInG
SKU 95065 For technical questions, please call 1-800-444-3353 Page 5 Do not force the Cordless Screw- driver . This tool will do the work better and safer at the capacity for which it was designed. unplug the Charger Adapter from the Cordless Screwdriver and the electrical outlet before use or befor...
Page 6 - Page 6; Extension Cords; Grounded; Symbology
SKU 95065 For technical questions, please call 1-800-444-3353 Page 6 Outlets for 2-prong plug Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-prong plug.) Extension Cords Grounded tools require a three wire extension cord. ...
Page 7 - Page 7; unpACKInG; on the cover of this manual as soon as possible.; Battery precautions; Do not touch the battery poles with any conductive source.
SKU 95065 For technical questions, please call 1-800-444-3353 Page 7 unpACKInG When unpacking, make sure that all the parts are included. See Figure C below. Charger Adapter Figure C Cordless Screwdriver Screwdriver Bits If any parts are missing or broken, please call Harbor Freight Tools at the num...
Page 8 - Page 8; CHARGInG THE BATTERy; Testing the Battery Charge; indicates that the tool should be charged. See Figure D above.; OpERATInG InSTRuCTIOnS; The bit size must match the size of the item being
SKU 95065 For technical questions, please call 1-800-444-3353 Page 8 CHARGInG THE BATTERy Insert the Charger Adapter (24) cord plug into the unit connector as shown below.Plug the Charger Adapter module into an electrical outlet. The red Charging Indicator on the Cordless Screwdriver will light. Cha...
Page 9 - Page 9; TROuBLESHOOTInG; MAInTEnAnCE; in a clean and dry location.
SKU 95065 For technical questions, please call 1-800-444-3353 Page 9 TROuBLESHOOTInG problem possible Cause probable Solution Cordless Screwdriver does not operate when Trigger Switch is pressed. Battery Pack is not charged. Recharge Battery Pack. Battery Pack does not recharge after connecting Char...
Page 10 - pARTS LIST; able individually as replacement parts.; ASSEMBLy DRAWInG; pLEASE READ THE FOLLOWInG CAREFuLLy
SKU 95065 For technical questions, please call 1-800-444-3353 Page 10 pARTS LIST part Description Qty 1 Output Axis 1 2 Gasket 1 3 Gearbox 1 4 Ring, Inner, Self-lock 1 5 Core, Inner, Self-lock 1 6 Block, Self-lock 1 7 Gear, Front Star 1 8 Holder, Star Gear, Middle 1 9 Gear, Star, Back 1 10 Gasket, L...
Page 11 - LIMITED 90 DAy WARRAnTy; OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF
SKU 95065 For technical questions, please call 1-800-444-3353 Page 11 LIMITED 90 DAy WARRAnTy Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials...