Chicago Electric 95004 - Manuals

Page 2 - SAVE THIS MAnUAL; IMpORTAnT SAFETY; general power Tool Safety Warnings; The term ′′power tool′′ in the warnings; the presence of flammable liquids,; sparks which may ignite the dust or

Page 2 For technical questions, please call 1-800-444-3353. SKU 95004 SAVE THIS MAnUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - under the influence of drugs, alcohol

Page 3 For technical questions, please call 1-800-444-3353. SKU 95004 ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. do not expose power tools to rain c. or wet conditions. Water entering a power tool will increase the risk of electric shock. do not ...

Page 4 - qualified repair person using only; Circular Saw Safety Warnings

Page 4 For technical questions, please call 1-800-444-3353. SKU 95004 with the switch is dangerous and must be repaired. disconnect the plug from the power c. source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventi...

Page 6 - For all other sawing, the lower; saw down on bench or floor.; An

Page 6 For technical questions, please call 1-800-444-3353. SKU 95004 to damaged parts, gummy deposits, or a build-up of debris. Lower guard should be retracted 12. manually only for special cuts such as ″plunge cuts″ and ″compound cuts.″ Raise lower guard by retracting handle and as soon as blade e...

Page 7 - Vibration Safety

Page 7 For technical questions, please call 1-800-444-3353. SKU 95004 pacemaker interference or pacemaker failure. In addition, people with pacemakers should: • Avoid operating alone. • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault ...

Page 8 - SAVE THESE; gROUndIng; Check with a qualified electrician; double Insulated Tools: Tools with; double insulation system which satisfies; Extension Cords; Grounded

Page 8 For technical questions, please call 1-800-444-3353. SKU 95004 abnormal vibration occurs, stop use immediately. SAVE THESE InSTRUCTIOnS. gROUndIng TO pREVEnT ELECTRIC SHOCK And dEATH FROM InCORRECT gROUndIng WIRE COnnECTIOn: Check with a qualified electrician if you are in doubt as to whether...

Page 9 - Symbology

Page 9 For technical questions, please call 1-800-444-3353. SKU 95004 Make sure the extension cord is properly 7. wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.Protect the extension cords from sharp 8. o...

Page 10 - SpECIFICATIOnS; CAUTION; UnpACKIng; Functions; the Saw on, first depress the Safety

Page 10 For technical questions, please call 1-800-444-3353. SKU 95004 SpECIFICATIOnS Motor 120 V~ / 60 Hz / 10 A; 5,000 RPM Laser Battery Type “AAA” (Qty. 2 included) Saw Blade 7-1/4” Diameter (Included) Minimum 5,000 RPM Rating Maximum Cutting Depth 2-1/2” @ 90° / 1-3/4” @ 45° Spindle Diameter 5/8...

Page 11 - OpERATIng InSTRUCTIOnS; Tool Set Up; hands and fingers, always wear heavy; firmly

Page 11 For technical questions, please call 1-800-444-3353. SKU 95004 OpERATIng InSTRUCTIOnS Read the EnTIRE IMpORTAnT SAFETY InFORMATIOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO pREVEnT SERIOUS InjURY ...

Page 12 - To Adjust The depth Of Cut:; FIgURE g; Then, lower the Depth Lock to its locked; To Adjust The Angle Of Cut:; FIgURE H; To Adjust The guide Ruler:; FIgURE I

Page 12 For technical questions, please call 1-800-444-3353. SKU 95004 Spindle to secure the Saw Blade (20) in place. To Adjust The depth Of Cut: dEpTH LOCK (44) dEpTH BRACKET (46) BASE (4) FIgURE g 1. The depth of cut may be adjusted to a maximum of 2-1/2” at 90 degrees and 1-3/4” at 45 degrees. To...

Page 13 - Work piece and Work Area Set Up; a NIOSH-approved respirator and have; general Operating Instructions; Make sure that all guards are in place; Make sure to hold the Circular Saw firmly; “OFF”

Page 13 For technical questions, please call 1-800-444-3353. SKU 95004 Work piece and Work Area Set Up Work piece selection: 1. Work piece must be free of foreign a. objects and loose knots.Do not use to cut logs, tree limbs, or b. uneven lumber.Wet lumber, green (unseasoned) c. lumber, and pressure...

Page 14 - Procedures not specifically; Lubrication; The Laser Guide requires the use of

Page 14 For technical questions, please call 1-800-444-3353. SKU 95004 MAInTEnAnCE And SERVICIng Procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVEnT SERIOUS InjURY FROM ACCIdEnTAL OpERATIOn: Turn the power Switch of the tool off and unplu...

Page 15 - replaced only by a qualified service; Troubleshooting

Page 15 For technical questions, please call 1-800-444-3353. SKU 95004 note: Reinstall in the same orientation. When installing the Carbon Brushes d. (60), make sure the carbon portion of the Carbon Brushes contact the motor’s Stator (56) and that the springs face away from the Stator. Also, make su...

Page 16 - pLEASE REAd THE FOLLOWIng CAREFULLY; pARTS LIST; part

Page 16 For technical questions, please call 1-800-444-3353. SKU 95004 pLEASE REAd THE FOLLOWIng CAREFULLY THE MANUfACTURER AND/OR DISTRIBUTOR HAS PROvIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS MANUAL AS A REfERENCE TOOL ONLy. NEITHER THE MANUfACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR...

Page 17 - ASSEMBLY dIAgRAM; individually as replacement parts.

Page 17 For technical questions, please call 1-800-444-3353. SKU 95004 ASSEMBLY dIAgRAM Record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available i...