Chicago Electric 93881 - Manuals

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.; Cluttered benches and dark areas

PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating,inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keepyour invoice with this manual. Write the invoice number on the inside of the front cove...

Page 4 - SPECIFIC SAFETY RULES AND PRECAUTIONS

SKU 93881 For technical questions, please call 1-800-444-3353 PAGE 4 6. Use only accessories that are recommended by the manufacturer for yourmodel. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 1. Tool service must be performed only by qualifi...

Page 6 - CHEMICAL PRECAUTIONS; If swallowed, seek medical treatment immediately. Do not induce; NOISE PRECAUTIONS; Prolonged exposure to high noise levels is hazardous to hearing.; PAGE 6; ELECTRICAL PRECAUTIONS; in compliance with all relevant

the Engine and Generator to completely cool. Then, remove the sparkplug from the Engine. 2. Do not alter or adjust any part of the Generator or Engine that is assembledand supplied by the manufacturer. 3. Always follow and complete scheduled Generator and Engine maintenance. CHEMICAL PRECAUTIONS 1. ...

Page 7 - RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS (120 VOLT)*; FIGURE A

MISC. PRECAUTIONS 1. WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity toa heart pacemaker could cause interference to or failure of the pacemaker. 2. WARNING! The warnings and precautions discussed in th...

Page 9 - PAGE 9; “MAXIMUM”; indicator on the Oil Dipstick.; To Fill The Fuel Tank:; be filled with; unleaded; FIGURE C

SKU 93881 For technical questions, please call 1-800-444-3353 PAGE 9 4. If necessary, continue adding engine oil, while rechecking the Oil Dipstick, untilthe oil level reaches the “MAXIMUM” indicator on the Oil Dipstick. Do not exceed the “MAXIMUM” indicator mark on the Oil Dipstick.(See Figure A.) ...

Page 10 - Grounding The Generator:; FIGURE D

SKU 93881 For technical questions, please call 1-800-444-3353 PAGE 10 supply all electrical loads the unitwill power. If powering exceeds the Generator’scapacity, it may be necessary to group one or more of the tools/equipment forconnection to a separate Generator. General Location: 1. It is recomme...

Page 11 - PRODUCT FEATURES; FIGURE E; push

SKU 93881 For technical questions, please call 1-800-444-3353 PAGE 11 PRODUCT FEATURES FUEL CAP (5B) AC CIRCUIT BREAKERS ( 1 2 ) POWER ON LIGHT ( 1 3 ) 120 VOLT AC OUTLET ( 4 ) ENGINE POWER SWITCH ( 1 4 ) OIL DIPSTICK COVER (12B) GROUNDING NUT ( 7 ) ENGINE PULL-START CORD DC CIRCUIT BREAKER ( 1 0 ) ...

Page 12 - OPERATING INSTRUCTIONS; “OFF”

SKU 93881 For technical questions, please call 1-800-444-3353 PAGE 12 the Circuit Breaker and restart the Engine. (See Figure E.) 7. Grounding Nut (7): Use this feature to attach a ground wire to an external earth ground. (See Figures D and E.) 8. Oil Dipstick Cover (12B): Remove this Cover to fill ...

Page 17 - PARTS LIST & ASSEMBLY DIAGRAM - CONTROL PANEL

PARTS LIST & ASSEMBLY DIAGRAM - CONTROL PANEL SKU 93881 For technical questions, please call 1-800-444-3353 PAGE 17 NOTE: Some parts are listed and sho wn for illustration purposes only, and are not available individually as replacement par ts. Pa rt # De scription Qty. Part # Description Qty. 1...

Page 20 - Approximately 5 Hour Run Time for Full Tank; LIMITED 90 DAY WARRANTY

SKU 93881 For technical questions, please call 1-800-444-3353 PAGE 20 I T E M 93881 1000 W 1000 W ATT TT GENERA GENERA TO O R Engine: Mitsubishi ® Model MH82, 2.4 HP, 4-stroke, OHV, 3600 RPM, Recoil Start, CDI; Generator Output: 120 VAC, 60 Hz; 950 Watt Rated; 1000 Watt Maximum; Fuel Capacity: 1.18 ...