Chicago Electric 93632 - Manuals

Page 2 - Save tHiS ManuaL; iMpoRtant SaFety; general power tool Safety warnings; The term ′′power tool′′ in the warnings

Page 2 For technical questions, please call 1-800-444-3353. SKU 93632 Save tHiS ManuaL Keep this manual for the safety warnings and precautions, assembly, operating, inspec- tion, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagr...

Page 4 - drill Safety warnings; maintain a firm grip on the tool with both

Page 4 For technical questions, please call 1-800-444-3353. SKU 93632 storing power tools. Such preventive safety measures reduce the risk of start- ing the power tool accidentally. Store idle power tools out of the reach d. of children and do not allow per- sons unfamiliar with the power tool or th...

Page 5 - vibration Safety

Page 5 For technical questions, please call 1-800-444-3353. SKU 93632 • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Inter- rupter (GFCI) should also be imple- mented – it prevents sustained electrical shock.Some dust creat...

Page 6 - Save tHeSe; gRounding; grounded tools: tools with three; double insulation system which satisfies

Page 6 For technical questions, please call 1-800-444-3353. SKU 93632 abnormal vibration occurs, stop use immediately. Save tHeSe inStRuctionS. gRounding to pRevent eLectRic SHocK and deatH FRoM incoRRect gRounding wiRe connection: Check with a qualified electrician if you are in doubt as to whether...

Page 7 - extension cords; Grounded; Symbology

Page 7 For technical questions, please call 1-800-444-3353. SKU 93632 Double insulated tools may be used in 2. either of the 120 volt outlets shown in the preceding illustration. (See outlets for 2-prong plug.) extension cords Grounded 1. tools require a three wire extension cord. Double Insulated t...

Page 8 - SpeciFicationS; unpacKing; When unpacking, make sure that the

Page 8 For technical questions, please call 1-800-444-3353. SKU 93632 SpeciFicationS Electrical Requirements 120 V~ / 60 Hz / 7.5 A Motor No Load Speed 0 - 550 RPM Drilling Capacity 2” Wood, 1/2” Mild Steel Chuck 1/2” Capacity, Keyed Chuck Spindle 1/2” 20 UNF e194601 39LH unpacKing When unpacking, m...

Page 9 - Features

Page 9 For technical questions, please call 1-800-444-3353. SKU 93632 inStRuctionS FoR putting into uSe Read the entiRe iMpoRtant SaFety inFoRMation section at the beginning of this manual including all text under subheadings therein before set up or use of this product. to pRevent SeRiouS injuRy FR...

Page 10 - opeRating inStRuctionS; installing drill Bits; ner bits for flat bottomed holes in wood

Page 10 For technical questions, please call 1-800-444-3353. SKU 93632 opeRating inStRuctionS Read the entiRe iMpoRtant SaFety inFoRMation section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up - installing drill Bits to...

Page 11 - general operating instructions; to run without continuous finger pressure; caution! do not change direction while

Page 11 For technical questions, please call 1-800-444-3353. SKU 93632 general operating instructions note: The motor will heat up as it is used. To avoid motor burn out, do not use continu- ally for more than 20 minutes at a time. Allow the tool to cool down for at least 10 minutes before resuming ...

Page 12 - function properly, take it to a qualified

Page 12 For technical questions, please call 1-800-444-3353. SKU 93632 Maintenance and inSpection The Armature (25) and Stator (29) 1. comprise the main part of the tool. Protect these electrical components from moisture or oil intrusion.Inspect the Carbon Brushes (34) 2. regularly. Replace them is ...

Page 13 - troubleshooting; drill operates but hole is not; Take to a qualified service; drill bit “wobbles” in chuck.; Loose or misaligned

Page 13 For technical questions, please call 1-800-444-3353. SKU 93632 troubleshooting drill operates but hole is not 1. effectively drilled. Possible Cause: a. Inappropriate or dull drill bit. Solution: Try a different drill bit. drill will not turn on. 2. Possible Cause: a. No power source. Soluti...

Page 14 - individually as replacement parts.; part; pLeaSe Read tHe FoLLowing caReFuLLy; To The PRoDUCT, oR ThAT he oR She IS qUALIfIeD To RePLACe ANy PARTS of; paRtS LiSt

Page 14 For technical questions, please call 1-800-444-3353. SKU 93632 Record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as re...

Page 15 - aSSeMBLy dRawing

Page 15 For technical questions, please call 1-800-444-3353. SKU 93632 aSSeMBLy dRawing

Page 16 - LiMited 90 day waRRanty; exPReSSLy IN LIeU of ALL oTheR

Page 16 For technical questions, please call 1-800-444-3353. SKU 93632 LiMited 90 day waRRanty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...