Chicago Electric 93431 - Manuals

Page 2 - SAVE ThIS MANuAL; IMPORTANT SAFETY; general Power Tool Safety Warnings; presence of flammable liquids, gases

Page 2 For technical questions, please call 1-800-444-3353. SKU 93431 SAVE ThIS MANuAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - under the influence of drugs, alcohol

Page 3 For technical questions, please call 1-800-444-3353. SKU 93431 increased risk of electric shock if your body is grounded. Do not expose power tools to rain or c. wet conditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use d. the cord ...

Page 4 - qualified repair person using only; Safety Warnings common for; and specifications provided with; their RATED SPEED can break and fly; must properly fit the spindle of the

Page 4 For technical questions, please call 1-800-444-3353. SKU 93431 the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach d. of chi...

Page 5 - be capable of stopping flying debris; of stopping flying debris generated by

Page 5 For technical questions, please call 1-800-444-3353. SKU 93431 wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory. After inspecting and installing an accessory, position yourself and bystanders away from the plane...

Page 6 - Kickback and Related Warnings; Maintain a firm grip on the power

Page 6 For technical questions, please call 1-800-444-3353. SKU 93431 the work by hand or against your body is unstable and may lead to loss of control and personal injury. This product is not a toy. Keep it out of 21. reach of children.People with pacemakers should 22. consult their physician(s) be...

Page 7 - SAVE ThESE

Page 7 For technical questions, please call 1-800-444-3353. SKU 93431 start-up. The operator can control torque reactions or kickback forces, if proper precautions are taken. Never place your hand near the 2. rotating accessory. Accessory may kickback over your hand. Do not position your body in the...

Page 8 - gROuNDINg; Check with a qualified electrician; Double Insulated Tools: Tools with; double insulation system which satisfies; Extension cords; Grounded

Page 8 For technical questions, please call 1-800-444-3353. SKU 93431 gROuNDINg TO PREVENT ELEcTRIc ShOcK AND DEATh FROM INcORREcT gROuNDINg WIRE cONNEcTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provid...

Page 9 - Symbology; OPM

Page 9 For technical questions, please call 1-800-444-3353. SKU 93431 REcOMMENDED MINIMuM WIRE gAugE FOR EXTENSION cORDS* (120/240 VOLT) NAMEPLATE AMPERES (at full load) EXTENSION cORD LENgTh 25’ 50’ 75’ 100’ 150’ 0 – 2.0 18 18 18 18 16 2.1 – 3.4 18 18 18 16 14 3.5 – 5.0 18 18 16 14 12 5.1 – 7.0 18 ...

Page 10 - SPEcIFIcATIONS; uNPAcKINg; the Sander. Snap it in place using firm; OPERATINg INSTRucTIONS; Tool Set up

Page 10 For technical questions, please call 1-800-444-3353. SKU 93431 SPEcIFIcATIONS Electrical Input 120 V~ / 60 Hz / 2 A No Load Speed 12,000 OPM Orbit Diameter 3/32” Max. Accessory Diameter 5” (127 mm) 8 hole hook and loop 1x 80 grit sanding disc included E194601 uNPAcKINg When unpacking, make s...

Page 11 - Attaching Sandpaper to the Backing Pad; Work Piece and Work Area Set up

Page 11 For technical questions, please call 1-800-444-3353. SKU 93431 Attaching Sandpaper to the Backing Pad Backing Pad (23) Switch (15) The Sanding Disc is attached by Hook and Loop to the Backing Pad. Place the Sanding Disc on the Backing Pad lining up the 8 holes so that the dust can be collect...

Page 12 - Procedures not specifically; Lubrication; Wear ANSI-approved safety goggles and; replaced only by a qualified service

Page 12 For technical questions, please call 1-800-444-3353. SKU 93431 MAINTENANcE AND SERVIcINg Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOuS INjuRY FROM AccIDENTAL OPERATION: Turn the Switch off and unplug the tool from it...

Page 13 - Troubleshooting; Problem; Disconnect power supply before service.

Page 13 For technical questions, please call 1-800-444-3353. SKU 93431 Troubleshooting Problem Possible causes Likely Solutions Tool will not start. Cord not connected. 1. No power at outlet. 2. Internal damage or wear. (Carbon 3. brushes or switch, for example.) Check that cord is plugged in. 1. Ch...

Page 14 - PLEASE READ ThE FOLLOWINg cAREFuLLY; PARTS LIST; individually as replacement parts.

Page 14 For technical questions, please call 1-800-444-3353. SKU 93431 Part Description Qty. 1 Top Enclosure 1 2 Bottom Enclosure 1 3 Stator 1 4 Rotor 1 5 Right Label 1 6 Left Label 1 7 Bearing 6x19x6 1 8 Brush Holder 2 9 Carbon Brush 2 10 Cord Anchor 1 Part Description Qty. 11 Screw ST3.5x16 2 12 C...

Page 15 - ASSEMBLY DIAgRAM

Page 15 For technical questions, please call 1-800-444-3353. SKU 93431 ASSEMBLY DIAgRAM (29) Sanding Disc (80 Grit)not shown

Page 16 - LIMITED 90 DAY WARRANTY; THE WARRANTIES OF MERCHANTABILITy AND FITNESS.

Page 16 For technical questions, please call 1-800-444-3353. SKU 93431 LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...