Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.; Cluttered benches and dark areas
SKU 93218 For technical questions, please call 1-800-444-3353. Page 2 PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating,inspection, maintenance and cleaning procedures, parts list and assembly diagram.Keep your invoice with...
Page 5 - SPECIFIC SAFETY RULES
SKU 93218 For technical questions, please call 1-800-444-3353. Page 5 23. Use only accessories that are recommended by the manufacturer for yourmodel. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 24. Tool service must be performed only by qual...
Page 8 - GROUNDING; GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
SKU 93218 For technical questions, please call 1-800-444-3353. Page 8 GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock.Check with a qualified electrician if you are in doubt as to whether the outlet isproperly grounded. Do not modify the power cord...
Page 9 - EXTENSION CORDS; Grounded; tools require a three wire extension cord.; Double Insulated; tools; DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS; FIGURE C
SKU 93218 For technical questions, please call 1-800-444-3353. Page 9 EXTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gaugeexte...
Page 10 - RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*; FIGURE D; SYMBOLOGY; FIGURE E
SKU 93218 For technical questions, please call 1-800-444-3353. Page 10 6. If you are using an extension cord outdoors, make sure it is marked with the suffix“W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure your extension cord is properly wired and in good electrical c...
Page 11 - UNPACKING; When unpacking, check to make sure all the parts shown on the; ASSEMBLY INSTRUCTIONS; For additional information regarding the parts listed in the
SKU 93218 For technical questions, please call 1-800-444-3353. Page 11 UNPACKING When unpacking, check to make sure all the parts shown on the Parts List on page 15 are included. If any parts are missing or broken, please call Harbor Freight Tools at thenumber shown on the cover of this manual as so...
Page 13 - OPERATING INSTRUCTIONS; “OFF”
SKU 93218 For technical questions, please call 1-800-444-3353. Page 13 OPERATING INSTRUCTIONS 1. WARNING! Always wear safety impact eye goggles and heavy work gloves when using the Masonry Saw. Using personal safety devices reduce the risk for injury. 2. Place the Masonry Saw on a flat, level, sturd...
Page 14 - Make sure the Power Switch (20) of the Masonry Saw is in its; performing any inspection, maintenance, or cleaning procedures.; Do not use damaged equipment.; inspect the Saw Blade (15). Using a dull Saw Blade will cause; To clean the exterior parts of the Masonry Saw,; use only a clean cloth and mild; Do not immerse any
SKU 93218 For technical questions, please call 1-800-444-3353. Page 14 INSPECTION, MAINTENANCE, AND CLEANING 1. WARNING! Make sure the Power Switch (20) of the Masonry Saw is in its “OFF” position and the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or ...
Page 15 - PLEASE READ THE FOLLOWING CAREFULLY; PARTS LIST
SKU 93218 For technical questions, please call 1-800-444-3353. Page 15 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLYDIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER ORDISTRIBUTOR MAKES ANY REPRESENTATION OR W...
Page 16 - ASSEMBLY DIAGRAM
SKU 93218 For technical questions, please call 1-800-444-3353. Page 16 ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.