Chicago Electric 93035 - Manuals

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.; Cluttered benches and dark areas; Note: Not For Medical Use

Page 2 SKU 93035 For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly,operating, inspection, maintenance and cleaning procedures, parts list and assemblydiagram. Keep your invoice with...

Page 5 - SPECIFIC SAFETY RULES

Page 5 SKU 93035 For technical questions, please call 1-800-444-3353. SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the Ultrasonic Cleaner. These carry important information. If unreadable or missing, contact Harbor Freight Tools for areplacement. 2. Always wear ANSI approved safety imp...

Page 6 - GROUNDING; GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS

Page 6 SKU 93035 For technical questions, please call 1-800-444-3353. GROUNDING WARNING! GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS 1. Tools marked with “Grounding Required” have a three wire cord and three pronggrounding plug. The plug must be connected to a properly grounded outlet. Ifthe tool s...

Page 7 - EXTENSION CORDS; Grounded; tools require a three wire extension cord.; Double Insulated; tools

Page 7 SKU 93035 For technical questions, please call 1-800-444-3353. FIGURE B DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS 4. Tools marked “Double Insulated” do not require grounding. They have a specialdouble insulation system which satisfies OSHA requirements and complies withthe applicable...

Page 8 - SYMBOLOGY; RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

Page 8 SKU 93035 For technical questions, please call 1-800-444-3353. 6. If you are using an extension cord outdoors, make sure it is marked with thesuffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure your extension cord is properly wired and in good electrical co...

Page 9 - to the; Assembly Diagram; Always make sure the Power Cord of the Ultrasonic Cleaner is; FIGURE 1

Page 9 SKU 93035 For technical questions, please call 1-800-444-3353. UNPACKING When unpacking, check to make sure that the product is intact and undamaged. If anyparts are missing or broken, please call Harbor Freight Tools at the number shown on thecover of this manual as soon as possible. OPERATI...

Page 10 - Use caution whenever removing the objects.; FIGURE 2

Page 10 SKU 93035 For technical questions, please call 1-800-444-3353. 4. Insert the Plug (1) into a 115V AC outlet. 5. The digital readout on the Control Panel (5) will read at its default setting of 180seconds. To adjust the time the unit runs, press the Set button until the desiredtime appears. N...

Page 11 - Do not use damaged equipment.; Submerging the unit will damage

Page 11 SKU 93035 For technical questions, please call 1-800-444-3353. INSPECTION, MAINTENANCE, AND CLEANING 1. WARNING! Make sure that the unit is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. 2. BEFORE EACH USE, inspect the general cond...

Page 12 - available individually as replacement parts.

Page 12 SKU 93035 For technical questions, please call 1-800-444-3353. THE MANUFACTURER AND/OR DISTRIB UTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLYDIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER ORDISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER TH...