Chicago Electric 92956 - Manuals

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA

PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating,inspection, maintenance and cleaning procedures, par ts list and assembly diagram. Keepyour invoice with this manual. Write the invoice number on the inside of the front cov...

Page 3 - ELECTRICAL SAFETY

3. Keep bystanders, children, and visitors away while operating a power tool.Distractions can cause you to lose control. Protect others in the work area fromdebris such as chips and sparks. Provide barriers or shields as needed. 2. Do not operate power tools in explosive atmospheres, such as in thep...

Page 6 - GROUNDING

9. Industrial applications must follow OSHA requirements. 13. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California)to cause cancer, birth defects or other reproductive harm. Some examples of th...

Page 8 - FIGURE B; EXTENSION CORDS

1. Grounded tools require a three wire extension cord. Double Insulated toolscan use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gaugeextension cord. Using extension cords with inadequately sized wire causes aserious drop in ...

Page 9 - SYMBOLOGY; FIGURE D

SYMBOLOGY V ~ A xxxx/min. FIGURE D Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions Per Minute (RPM) FIGURE C SKU 92956 For technical questions please call 1-800-444-3353 PAGE 9 no RECOMMENDED MINIMUM WIRE GAUGE FOR...

Page 10 - PRODUCT FEATURES; right. For a counterclockwise rotation, move the; Forward/Reverse Switch to the; UNPACKING; For additional information regarding the parts mentioned in; the following pages, refer to the Assembly Diagram on page 14.

SKU 92956 For technical questions please call 1-800-444-3353 PAGE 10 PRODUCT FEATURES 1. Drill Chuck (3) and Chuck Key (33): The Close Quarter Drill is equipped with a3/8” keyed Drill Chuck (3) that will accept drill bits (not included) with a 1/16” to3/8” shank. Installing a drill bit into the Dril...

Page 11 - OPERATING INSTRUCTIONS; Hold the Drill firmly with both hands.; Position the drill bit on the material that is to be drilled.

SKU 92956 For technical questions please call 1-800-444-3353 PAGE 11 OPERATING INSTRUCTIONS 2. Use the Forward/Reverse Switch (35) to select the desired rotation of the tool.(See Figure D.) 3. Insert a drill bit (not included) into the Drill Chuck (3), and secure the drill bit inthe Drill Chuck with...

Page 12 - Unplug the Drill from its electrical outlet.; two Carbon Brushes (19) when the Motor performance decreases, or

SKU 92956 For technical questions please call 1-800-444-3353 PAGE 12 14. When you have drilled the hole, remove the drill bit from the hole while the DrillChuck (3) is still rotating. This prevents the drill bit from getting caught in thehole and causing damage. 15. Release pressure on the Trigger (...

Page 13 - FIGURE E; PLEASE READ THE FOLLOWING CAREFULLY

SKU 92956 For technical questions please call 1-800-444-3353 PAGE 13 5. CAUTION! All maintenance, service, or repairs not listed in this manualare only to be attempted by a qualified service technician. CARBON BRUSH (19) CARBON BRUSH (19) FIGURE E PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER...

Page 14 - ASSEMBLY DIAGRAM

ASSEMBLY DIAGRAM SKU 92956 For technical questions please call 1-800-444-3353 PAGE 14 NOTE: Some par ts are listed and sho wn f or assemb ly purposes onl y , and are not a v ailab le individuall y as replacement par ts. 33: CHUCK KEY NOT SHOWN. 34 35