Chicago Electric 92880 - Manuals

Chicago Electric 92880 – Manual in PDF format online.

Manuals:

Manual

Manual Chicago Electric 92880

Summary

Page 2 - presence of flammable liquids, gases

Page 2 For technical questions, please call 1-800-444-3353. SKU 92880 Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - under the influence of drugs, alcohol

Page 3 For technical questions, please call 1-800-444-3353. SKU 92880 personal safety 3. Stay alert, watch what you are a. doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattenti...

Page 4 - their RATED SPEED can break and fly

Page 4 For technical questions, please call 1-800-444-3353. SKU 92880 REV 10e be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Battery tool use and care 5. Recharge only with the charger a. specified by the manufacturer. A charge...

Page 6 - Vibration Safety

Page 6 For technical questions, please call 1-800-444-3353. SKU 92880 REV 10e cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should: • Avoid operating alone. • Do not use with power switch locked on. • Properly maintain and inspect to avoid electrical shock. •...

Page 7 - grounding; Check with a qualified electrician; double insulation system which satisfies; Extension Cords

Page 7 For technical questions, please call 1-800-444-3353. SKU 92880 To reduce vibration, maintain the tool 7. as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVE ThESE InSTRuCTIOnS. grounding TO pREVEnT ELECTRIC ShOCK AnD DEATh FROM InCORRECT gROunDIng WIRE CO...

Page 8 - SpECIFICATIOnS; unpacking; When unpacking, make sure that the item is; Charging the Battery pack; Figure 2; first time they are charged. Allow several; Figure 1

Page 8 For technical questions, please call 1-800-444-3353. SKU 92880 SpECIFICATIOnS Construction High-Impact Plastic Housing, Brass Spindle & Collets, Stainless Chuck Body Power Required 9.6 VDC / NiCd Battery Pack Battery Recharge 120 VAC to 12 VDC Transformer Tool Speed Variable: 5,000 - 25,0...

Page 9 - While being charged, the green LED will; InSTRuCTIOnS FOR puTTIng; Work piece and Work Area Set up; distraction and injury.

Page 9 For technical questions, please call 1-800-444-3353. SKU 92880 Insert the battery pack into the Charger 4. Base (25) by aligning the ribs on the Charger Base with the grooves in the battery pack. Press the battery pack into place. Press down on the battery pack to make 6. sure that the contac...

Page 10 - Inserting a Bit in the Tool; Severe personal or property damage; Installing the Flexible Shaft

Page 10 For technical questions, please call 1-800-444-3353. SKU 92880 You must use personal safety equipment 5. including, but not limited to, ANSI- approved eye and hearing protection, as well as heavy work gloves.Before beginning work, provide for 6. sparks and debris that will fly off the work s...

Page 11 - Installing a Bit in the Flexible Shaft; Installing or Removing Collars

Page 11 For technical questions, please call 1-800-444-3353. SKU 92880 Figure 10 5. Pass the end of the Flexible Shaft Core through the Collet Nut, and into the 1/8” Collet. Depress the Spindle Lock (10), and hold it down while tightening the Collet Nut with the Wrench. When the Collet Nut is tight,...

Page 12 - OpERATIng InSTRuCTIOnS; for the job. Insert the bit or attachment as

Page 12 For technical questions, please call 1-800-444-3353. SKU 92880 OpERATIng InSTRuCTIOnS Read the EnTIRE IMpORTAnT SAFETY InFORMATIOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Charge the Battery Pack (18) and inser...

Page 13 - Procedures not specifically; Wear ANSI-approved safety goggles and; replaced only by a qualified service; Accessory Storage and handling

Page 13 For technical questions, please call 1-800-444-3353. SKU 92880 MAInTEnAnCE AnD SERVICIng Procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVEnT SERIOuS InjuRY FROM ACCIDEnTAL OpERATIOn: Turn the power Switch of the tool off and remov...

Page 14 - pARTS LIST - ACCESSORIES; pLEASE READ ThE FOLLOWIng CAREFuLLY

Page 14 For technical questions, please call 1-800-444-3353. SKU 92880 part Description A 10-Piece Mounted Stone Set B 2-Piece Buffing Wheel Set C 4-Piece Sanding Drum Set D 36-Piece Sanding Disc Set & 3-Piece Cutoff Wheel Set E 2-Piece Drill Bit Set F Flat Wrench G 2-Piece Diamond Burr Set H Sq...

Page 15 - pARTS LIST

Page 15 For technical questions, please call 1-800-444-3353. SKU 92880 part Description Qty. 1 Collet Nut 1 2 Collet 1 3 Front Collar 1 4 Driver Shaft 1 5 Bearing #696 1 6 Sleeve 1 7 Motor 1 8 Switch 1 9 Spindle Lock Spring 1 10 Spindle Lock 1 11 Left Cover 1 12 Left Cover Label 1 13 Rubber Buffer 1...

Page 16 - individually as replacement parts.; LIMITED 90 DAY WARRAnTY; THE WARRANTIES OF MERCHANTABILITy AND FITNESS.

Page 16 For technical questions, please call 1-800-444-3353. SKU 92880 Record product’s Serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as re...