Chicago Electric 92472 - Manuals

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA

PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating,inspection, maintenance and cleaning procedures, par ts list and assembly diagram. Keepyour invoice with this manual. Write the invoice number on the inside of the front cov...

Page 3 - ELECTRICAL SAFETY; increase the risk of electric shock.; PERSONAL SAFETY

3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debrissuch as chips and sparks. Provide barriers or shields as needed. ELECTRICAL SAFETY 1. Avoid body contact with grounded surfaces such as...

Page 4 - TOOL USE AND CARE; do the job better and safer at the rate for which it is designed.; SERVICE; risk of; SPECIFIC SAFETY RULES

TOOL USE AND CARE 1. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 2. Do not use the power tool if the Trigger (34) does not turn it on or off. Any tool that cannot be controlled with the Trig...

Page 5 - the Impact Driver with wet hands.; on the Impact Driver.

obstructions, grease, oil, trash, and other debris. Do not use the Impact Driver in areasnear flammable chemicals, dusts, and vapors. Do not use this product in a damp or wetlocation. 2. Maintain labels and nameplates on this product. These carry important information. If unreadable or missing, cont...

Page 6 - PRODUCT FEATURES

15. WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker couldcause interference or failure of the pacemaker. In addition, people with pacemakersshould adhere to the following: Avoid operating powe...

Page 7 - FIGURE A; TO CHARGE THE IMPACT DRIVER

in its “OFF” position, the Battery (40) is removed from the Impact Driver, and the Charger(46) is unplugged from its electrical outlet prior to making any adjustments to the tool.(See Figure A.) 2. Lock Sleeve (9): Accepts the 1/4” shank diameter Double End Screwdriver (39), 1/4” Socket (42), 5/16” ...

Page 8 - OPERATING INSTRUCTIONS

operate at full power. Do not recharge the Battery longer than 1-1/2 hours, as damage tothe Battery and/or Charger (46) will occur. (See Figure A.) 3. Make sure the Trigger (34) on the Impact Driver is in its “OFF” position. Slide the Battery (40) off the Handle of the Impact Driver. Next, insert th...

Page 9 - Motor will cause the tool to twist.; immerse the Impact Driver in any liquids.

SKU 92472 For technical questions, please call 1-800-444-3353 PAGE 9 2. If necessary, adjust the Forward/Reverse Lever (37). (See Figure A.) 3. Whenever possible, secure the workpiece in place, using a vise or clamps (not included). 4. Insert the fully charged Battery (40) into the Handle of the Imp...

Page 10 - only to be attempted by a qualified service technician.; PLEASE READ THE FOLLOWING CAREFULLY; PARTS LIST

5. When storing: Always remove the Battery (40) from the Impact Driver. Keep the Impact Driver and its accessories in a clean, dry location and out of children’s reach. SKU 92472 For technical questions, please call 1-800-444-3353 PAGE 10 6. CAUTION! All maintenance, service, or repairs not listed i...

Page 11 - ASSEMBLY DIAGRAM

NO TE: Some par ts are listed and sho wn f or illustration pur poses only , and are not a v ailab le individually as replacement par ts . ASSEMBLY DIAGRAM SKU 92472 For technical questions, please call 1-800-444-3353 PAGE 11 42: 1/4” Soc ket not sho wn. 43: 5/16” Soc ket not sho wn. 44: 3/8” Soc ket...