Chicago Electric 92146 - Manuals

Chicago Electric 92146 – Manual in PDF format online.

Manuals:

Manual

Manual Chicago Electric 92146

Summary

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; UNPACKING

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 2 PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating,inspection, maintenance and cleaning procedures, parts list and assembly diagram.Keep your invoice with...

Page 5 - SPECIFIC SAFETY RULES; RISK OF INJECTION OR SEVERE INJURY!

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 5 4. Disconnect the Power Cord Plug from the power source before making anyadjustments, changing accessories, or storing the tool. Such preventivesafety measures reduce the risk of starting the tool accidentally. 5. Store idle tools...

Page 7 - GROUNDING; outlet installed by a qualified electrician.; SAVE THESE INSTRUCTIONS

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 7 GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power co...

Page 8 - EXTENSION CORDS; Grounded tools require a three wire extension cord.

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 8 FIGURE A 3-PRONG PLUG GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS EXTENSION CORDS 1. Grounded tools require a three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gaugeextension c...

Page 9 - SYMBOLOGY; FIGURE B; R E C O M M E N D E D M IN IM U M W IR E G A U G E F O R E X T E N S IO N C O R D S *; WARNING: NEVER use 16 or 18 gauge extension cords

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 9 6. If you are using an extension cord outdoors, make sure it is marked with the suffix“W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure your extension cord is properly wired and in good electrical co...

Page 10 - PRODUCT FEATURES AND PRECAUTIONS; FIGURE D

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 10 PRODUCT FEATURES AND PRECAUTIONS NOTICE: Prior to using the pressure washer for the first time, it is IMPORTANT that it has been determined that there is an adequate water supply.The Pressure Washer needs TWICE the volume of the ...

Page 11 - FIGURE E

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 11 Pre-Operation Tips: 1. The optimum angle for spraying water against a surface is 45 degrees. A 90degree angle or direct impact of the water onto the surface can cause dirt par-ticles to become imbedded in the cleaning surface and...

Page 12 - To Set Up The Pressure Washer:; FIGURE F; ASSEMBLY AND OPERATING INSTRUCTIONS; FIGURE G

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 12 To Set Up The Pressure Washer: 1. Attach the Spray Wand Extension (11A) to the Gun by inserting the tip of theWand into the Gun Collar. Then push in firmly and rotate to secure the Wand tothe Gun. (See Figure F.) 2. The Spray Wan...

Page 13 - Attach a garden hose (not included) of the appropriate size (; To Adjust The Spray Pattern:; The; FIGURE H

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 13 6. Attach a garden hose (not included) of the appropriate size ( 5 / 8 - 3 / 4 ” ID) to the Garden Hose Adapter (58). Then attach the other end of the garden hose to acold water faucet, and fully turn on the water supply. CAUTION...

Page 14 - To Apply A Detergent:; Thoroughly rinse the detergent from the cleaning surface.; FIGURE J

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 14 To Apply A Detergent: 1. Make sure the Pressure Washer is turned off and unplugged from its electrical out-let. 2. Unscrew and remove the top of the Detergent Bottle (34A) and fill it with a milddetergent speciffically designed f...

Page 15 - How To Avoid Damaging Surfaces:; Place the Nozzle at a 45 degree angle to the cleaning surface.; Shutdown Precautions:; Squeeze the Trigger (23A) of the Gun to depressurize the system.

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 15 How To Avoid Damaging Surfaces: 1. Adjust the Knob (16A) to a wide fan pattern before plugging in or switching on thegun. (See Figure J.) 2. Place the Nozzle at a 45 degree angle to the cleaning surface. 3. Keep the stream moving...

Page 16 - FIGURE K

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 16 inlet/ Filter (18), and any other condition that may affect its safe operation. Ifabnormal noise or vibration occurs, have the problem corrected before furtheruse.Do not use damaged equipment. 3. To clean, remove excess water fro...

Page 17 - PARTS LIST; Cord; PLEASE READ THE FOLLOWING CAREFULLY

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 17 PARTS LIST Part # Description Qty. Part # Description Qty. 1 Outlet Port 1 31 Alloy Bearing Housing 1 2 O-Ring (22 x 2.4mm) 1 32 O-Ring (88 x 2.4mm) 1 3 Core Valve Cap 1 33 Motor 1 4 Ball 1 34 O-Ring (14 x 1.9mm) 6 5 Spring (0.8 ...

Page 18 - ASSEMBLY DIAGRAM

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 18 ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. 58 o o 59 60: CORD NOT SHOWN. o

Page 19 - PARTS LIST - CONTINUED; ASSEMBLY DIAGRAM - CONTINUED; Detergent Bottle

SKU 92146 For technical questions, please call 1-800-444-3353. PAGE 19 3A 4A 5A 9A 8A 11A 25A 10A 4A 7A 23A 31A 6A 12A 28A 32A 33A 18A 17A 15A 13A 9A 8A 1A PARTS LIST - CONTINUED NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement p...