Chicago Electric 91938 - Manuals

Page 2 - COnTEnTS; iMpOrTAnT SAFETY; gEnErAl TOOl SAFETY WArningS . 3

Page 2 For technical questions, please call 1-800-444-3353. SKU 91938 COnTEnTS iMpOrTAnT SAFETY inFOrMATiOn .................................3 gEnErAl TOOl SAFETY WArningS . 3 grOUnDing inSTrUCTiOnS ..........5 110-120 V~ grOUnDED TOOlS: TOOlS WiTH THrEE prOng plUgS ....................... 5 CUT-OFF...

Page 3 - SAVE THiS MAnUAl; general Tool Safety Warnings; warnings and instructions may result

Page 3 For technical questions, please call 1-800-444-3353. SKU 91938 SAVE THiS MAnUAl Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 5 - grOUnDing inSTrUCTiOnS; Tools with Three prong plugs; not fit the outlet, have the proper outlet; Cut-off Saw Safety Warnings

Page 5 For technical questions, please call 1-800-444-3353. SKU 91938 grOUnDing inSTrUCTiOnS TO prEVEnT ElECTriC SHOCk AnD DEATH FrOM inCOrrECT grOUnDing WirE COnnECTiOn rEAD AnD FOllOW THESE inSTrUCTiOnS: 110-120 V~ grounded Tools: Tools with Three prong plugs In the event of a malfunction or 1. br...

Page 6 - DO nOT OpErATE WiTH AnY; NIOSH-approved for the specific hazards

Page 6 For technical questions, please call 1-800-444-3353. SKU 91938 The Swing Guard (53) should be 2. retracted manually only for special cuts such as “Pocket Cuts) and “Compound Cuts.” Raise the Swing Guard (53) only enough to begin the cut. As soon as the Cut-Off Wheel enters the material, the S...

Page 7 - Vibration Safety; SAVE THESE

Page 7 For technical questions, please call 1-800-444-3353. SKU 91938 pacemaker interference or pacemaker failure.WARNING: Some dust created by power 23. sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of California] to cause cancer, bir...

Page 8 - When unpacking, make sure that the; inSTrUCTiOnS FOr pUTTing; Functions

Page 8 For technical questions, please call 1-800-444-3353. SKU 91938 SpECiFiCATiOnS Electrical Input 120 V~ / 60 Hz / 2 HP Motor No Load Speed 3500 RPM Max. Accessory Diameter 14” Recommended Cut-Off Wheel Types 14” Cut-Off Wheel for Metal (SKU 44814, included) 14” Cut-Off Wheel for Masonry (SKU 44...

Page 9 - OpErATing inSTrUCTiOnS; Tool Set Up; FigUrE 1

Page 9 For technical questions, please call 1-800-444-3353. SKU 91938 OpErATing inSTrUCTiOnS read the EnTirE iMpOrTAnT SAFETY inFOrMATiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO prEVEnT SEriOUS injUrY F...

Page 10 - FigUrE; Work piece and Work Area Set Up; FigUrE 4

Page 10 For technical questions, please call 1-800-444-3353. SKU 91938 lOOSEn THE bOlT (112) 7. and make sure that the Swing guard (53) moves freely back into place before operation. Depth Adjustment FigUrE 3 Lock Ball (25) Depth Adjustment Bolt (16) To adjust the depth, turn the Depth Adjustment Bo...

Page 11 - general Operating instructions

Page 11 For technical questions, please call 1-800-444-3353. SKU 91938 FigUrE 5 bolts (41 & 44) Angle Scale (35) Upper Two Screw Holes b. To cut at various angles (up to 45 degrees), adjust the Angle Scale (35) by loosening the two Bolts (41 & 44) as shown in FigUrE 5 . Adjust the Angle Scal...

Page 12 - Procedures not specifically; lubrication; replaced only by a qualified service

Page 12 For technical questions, please call 1-800-444-3353. SKU 91938 MAinTEnAnCE AnD SErViCing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO prEVEnT SEriOUS injUrY FrOM ACCiDEnTAl OpErATiOn: release the Trigger, unplug the tool from its e...

Page 13 - Troubleshooting; problem; Disconnect power supply before service.

Page 13 For technical questions, please call 1-800-444-3353. SKU 91938 Troubleshooting problem possible Causes likely Solutions Tool will not start. Cord not connected. 1. No power at outlet. 2. Tool’s thermal reset breaker 3. tripped (if equipped).Internal damage or wear. 4. (Carbon brushes or swit...

Page 14 - plEASE rEAD THE FOllOWing CArEFUllY; pArTS liST; individually as replacement parts.

Page 14 For technical questions, please call 1-800-444-3353. SKU 91938 part Description 1 Bolt M6x14 2 Lock Nut 3 Dust Cover 4 Bolt M5x12 5 Lock Nut M6 6 Nut M10 7 Nut M10 8 Binding Ring 9 Washer 10 Nut M8 11 Bolt 4-M6x24 12 Rubber Foot 13 Base 14 Bracket 15 Nut M8 16 Depth Adjustment Bolt 17 Screw ...

Page 15 - ASSEMblY DiAgrAM

Page 15 For technical questions, please call 1-800-444-3353. SKU 91938 ASSEMblY DiAgrAM Hex Key (111a) - not shown. rEV 10a, 10b 112

Page 16 - liMiTED 90 DAY WArrAnTY; If our inspection verifies the defect, we

Page 16 For technical questions, please call 1-800-444-3353. SKU 91938 liMiTED 90 DAY WArrAnTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...