Page 2 - Read all instructions before using this product!; Page 2; Electrical Requirements; DESCRIPTION
Specification Warning: For Indoor Use Only Save This Manual You will need the manual for the safety warnings and precautions, assemblyinstructions, operating and maintenance procedures, parts list and diagram. Keepyour invoice with this manual. Write the invoice number on the inside of the frontcove...
Page 3 - by a qualified technician.
7. Do not overreach. Keep proper footing and balance at all times. 8. Always use protection. Wear ANSI approved safety impact eye glasses when using this product. ANSI approved safety impact eye glasses areavailable from Harbor Freight Tools. 9. When necessary, use hearing and breathing protection. ...
Page 4 - presence of toxic materials.; Do not use the Vacuum/Blower as a sprayer. Do not use to groom; lit cigarettes, etcetera. Avoid vacuuming ashes all together.; Unpacking; Page 4
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1. DO NOT SUBMERGE THE MOTOR HOUSING (3) IN WATER OR OTHER LIQUIDS. 2. Guard against Electric Shock. Always prevent body contact with grounded surfaces such as pipes, radiators, ranges, refrigerators, etcetera. Do not handleany part of the Vacuum/Blower with...
Page 5 - may place the Hose Attachment (22) over the end of the Hose.; See
SKU 90981 Page 5 To Vacuum Dry Materials: 1. Note: A dry bag (19) is necessary when vacuuming dry material. If the Bag is wet when vacuuming dry material, the Bag will clog quickly and become difficultto clean. If the Bag is wet, dry the Bag before performing dry vacuuming. See Figures A, B, and Ass...
Page 6 - Turn the Switch (1) to its “ON” position to operate the Blower.
To Vacuum Liquids: 1. For Vacuuming liquids it is necessary to remove the Rubber Band (18) and Bag (19). To do so, remove the Motor Housing (3) from the Container (20). Empty alldebris from the Container. Remove the Rubber Band (18) and Bag from the BallBasket (17). See Figures A, B, and Assy. Diagr...
Page 7 - Page 7; PARTS LIST; PART # DESCRIPTION QTY
INSPECTION, MAINTENANCE, AND CLEANING 1. CAUTION: Always disconnect the Vacuum/Blower from its electrical supply source before performing and inspection, maintenance, or cleaning. 2. Before each use, inspect the general condition of the Vacuum/Blower. Check for broken parts, damaged power cord, and ...
Page 8 - Page 8; ASSEMBLY DRAWING
SKU 90981 Page 8 NOTE: Some parts are listed and shown for illustration purposes only and are notavailable individually as replacement parts. Part 1 Part 2 Part 4 Part 3 Part 5 Part 6 Part 8 Part 7 Part 9 Part 10 Part 11 Part 12 Part 14 Part 15 Part 13 Part 22 Part 21 Part 20 Part 19 Part 18 Part 17...