Chicago Electric 69454 - Manuals

Page 2 - table of Contents; impORtant SaFEtY inFORmatiOn; General power tool Safety Warnings; tY

Page 2 For technical questions, please call 1-800-444-3353. Item 69454 table of Contents Safety ......................................................... 2Specifications ............................................ 12Setup ......................................................... 12Operation ..........

Page 9 - Vibration Safety; SaVE thESE inStRuCtiOnS.

Page 9 For technical questions, please call 1-800-444-3353. Item 69454 Vibration Safety This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related ...

Page 10 - Grounding; Grounded tools: tools with three prong plugs; Double insulated tools: tools with two prong plugs

Page 10 For technical questions, please call 1-800-444-3353. Item 69454 Grounding tO pREVEnt ElECtRiC ShOCK anD DEath FROm inCORRECt GROunDinG WiRE COnnECtiOn: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug prov...

Page 11 - Extension Cords; Symbology

Page 11 For technical questions, please call 1-800-444-3353. Item 69454 Extension Cords 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge e...

Page 12 - Specifications

Page 12 For technical questions, please call 1-800-444-3353. Item 69454 Specifications Electrical Rating 120V~ / 60Hz / 11A Motor No Load Speed 7800 RPM Max. Accessory Diameter 7″ (178 mm) Max. Accessory Thickness 1/4" (6mm) Arbor Hole Diameter 7/8" Using included adapter Spindle Thread 5/8″...

Page 13 - installing the auxiliary handle; Functions

Page 13 For technical questions, please call 1-800-444-3353. Item 69454 installing the auxiliary handle tO pREVEnt SERiOuS injuRY: Do not operate this tool with one hand only or without the auxiliary handle properly installed. Alternate locations Auxiliary Handle Figure B 1. The Auxiliary Handle may...

Page 14 - Operating instructions; tool Set up; installing a non-threaded Grinding Wheel

Page 14 For technical questions, please call 1-800-444-3353. Item 69454 Operating instructions Read the EntiRE impORtant SaFEtY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up tO pREVEnt SERiOuS injuRY...

Page 15 - installing a threaded accessory; Workpiece and Work area Set up

Page 15 For technical questions, please call 1-800-444-3353. Item 69454 installing a threaded accessory tO pREVEnt injuRY: Wear heavy-duty work gloves when handling wire wheels and brushes. these accessories are sharp and can cause injury. Figure E 1. The accessory MUST be: • rated to at least 7800 ...

Page 16 - maintenance and Servicing; accessory Storage and handling

Page 16 For technical questions, please call 1-800-444-3353. Item 69454 maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO pREVEnt SERiOuS injuRY FROm aCCiDEntal OpERatiOn: turn the power Switch of the tool off and unpl...

Page 17 - troubleshooting; problem

Page 17 For technical questions, please call 1-800-444-3353. Item 69454 troubleshooting problem possible Causes likely Solutions Tool will not start. 1. Cord not connected.2. No power at outlet. 3. Tool’s thermal reset breaker tripped (if equipped). 4. Internal damage or wear. (Carbon brushes or swi...

Page 18 - parts list and Diagram; plEaSE REaD thE FOllOWinG CaREFullY

Page 18 For technical questions, please call 1-800-444-3353. Item 69454 Record product’s Serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as r...

Page 19 - assembly Diagram

Page 19 For technical questions, please call 1-800-444-3353. Item 69454 assembly Diagram Sa FE tY Op ER ati O n m aint Enan CE SE tup

Page 20 - limited 90 Day Warranty

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in ma...