Chicago Electric 67845 - Manuals

Page 2 - Contents; Important saFetY; general poWer tool saFetY; InstruCtIons For puttIng; Work pIeCe and Work area

Page 2 For technical questions, please call 1-800-444-3353. SKU 67845 Contents Important saFetY InFormatIon ................................. 3 general poWer tool saFetY WarnIngs ........................................... 3 ImpaCt WrenCh saFetY WarnIngs ........................................... 5...

Page 3 - saVe thIs manual; Keep this manual for the safety warnings; general power tool safety Warnings; The term ′′power tool′′ in the warnings; the presence of flammable liquids,; Power tools create

Page 3 For technical questions, please call 1-800-444-3353. SKU 67845 saVe thIs manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 4 - under the influence of drugs, alcohol; Safety

Page 4 For technical questions, please call 1-800-444-3353. SKU 67845 operating a power tool. do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. use personal pr...

Page 5 - This will; Impact Wrench safety Warnings; are not only flammable, but they also

Page 5 For technical questions, please call 1-800-444-3353. SKU 67845 the power tool for operations different from those intended could result in a hazardous situation. battery tool use and care 5. recharge only with the charger a. specified by the manufacturer. A charger that is suitable for one ty...

Page 6 - Vibration safety

Page 6 For technical questions, please call 1-800-444-3353. SKU 67845 electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock. WARNING: Some dust created by power 8. sanding, sawing, gri...

Page 7 - saVe these; groundIng; Check with a qualified electrician; double Insulated tools: tools with; outlets for 2-prong plug; Battery Chargers marked “Double; extension Cords; Extension cords must not be used with; symbology

Page 7 For technical questions, please call 1-800-444-3353. SKU 67845 saVe these InstruCtIons. groundIng to preVent eleCtrIC shoCk and death From InCorreCt groundIng WIre ConneCtIon: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. do not modify t...

Page 8 - speCIFICatIons; unpaCkIng; When unpacking, make sure that the; For additional information regarding the; Functions; Figure 1; operatIng InstruCtIons; read the entIre Important; tool set up

Page 8 For technical questions, please call 1-800-444-3353. SKU 67845 speCIFICatIons Battery Pack 18 V / NiCd / 1700 mAh Speed 0 - 2,100 RPM / 3,000 BPM (No Load) Average Torque 205 ft-lbs Forward (clockwise) 211 ft-lbs Reverse (counterclockwise) Drive 1/2” Square Drive Bolt Capacity 1/2” (13 mm) un...

Page 9 - Charging the battery pack; Work piece and Work area set up; lines, nearby that will present a hazard; general operating Instructions

Page 9 For technical questions, please call 1-800-444-3353. SKU 67845 Charging the battery pack Figure 2 Charger (36) Adapter (37) LED Light Flanges 1. Plug the Adapter (37) into a 120V wall outlet. Charger (36) Battery Pack (35) Flange Figure 3 2. Align the flanges on the Charger (36) with the slot...

Page 10 - “breaking loose” Fasteners

Page 10 For technical questions, please call 1-800-444-3353. SKU 67845 To set the Impact Anvil (6) to turn • forward (clockwise), press the right side of the Forward/Reverse Lever (26) until it clicks into place. To set the Impact Anvil (6) to turn in • Reverse (counterclockwise), press the left sid...

Page 11 - Procedures not specifically; lubrication; replaced by a qualified technician as; replaced only by a qualified service; troubleshooting

Page 11 For technical questions, please call 1-800-444-3353. SKU 67845 maIntenanCe and serVICIng Procedures not specifically explained in this manual must be performed only by a qualified technician. to preVent serIous InjurY From aCCIdental operatIon: turn the power switch of the tool off and unplu...

Page 12 - please read the FolloWIng CareFullY; parts lIst

Page 12 For technical questions, please call 1-800-444-3353. SKU 67845 part description Qty 1 Screw M4 x 25 4 2 Impact Cap 1 3 Felt Washer 1 4 Needle Bearing HKH1816 1 5 Plastic Washer 1 6 Impact Anvil 1 7 Impact Block Assembly 1 8 Planetary Gear 3 9 Pin Ø5 x 15.6 3 10 Flat Washer 1 11 Ring Gear 1 1...

Page 13 - assemblY dIagram

Page 13 For technical questions, please call 1-800-444-3353. SKU 67845 assemblY dIagram 35 36 37

Page 14 - lImIted 90 daY WarrantY; vary from state to state.; record product’s serial number here:; individually as replacement parts.

Page 14 For technical questions, please call 1-800-444-3353. SKU 67845 lImIted 90 daY WarrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...