Chicago Electric 67256 - Manuals

Page 2 - SaVE ThIS MaNUaL; IMPORTaNT SaFETY; general Safety Warnings; The term ′′power tool′′ in the

SKU 67256 For technical questions, please call 1-800-444-3353. Page 2 SaVE ThIS MaNUaL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 4 - Specific Safety Warnings; Keep hands and fingers safely away

SKU 67256 For technical questions, please call 1-800-444-3353. Page 4 and off. Any power tool that cannot be controlled with the Switch is dangerous and must be repaired. disconnect the Power Cord from c. the power source before making any adjustments, changing accessories, or storing the power tool...

Page 5 - Vibration Safety

SKU 67256 For technical questions, please call 1-800-444-3353. Page 5 • Do not use with power switch locked on. • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sust...

Page 6 - Include vibration-free periods each; SaVE ThESE; gROUNdINg; double Insulated Tools: Tools; system which satisfies OSHA; Extension Cords; Double Insulated

SKU 67256 For technical questions, please call 1-800-444-3353. Page 6 Include vibration-free periods each 5. day of work.Grip the power tool as lightly as 6. possible (while still keeping safe control of it). Let the tool do the work. To reduce vibration, maintain the 7. power tool as explained in t...

Page 7 - a qualified electrician before using it.; Symbology; SPECIFICaTIONS; UNPaCKINg

SKU 67256 For technical questions, please call 1-800-444-3353. Page 7 The smaller the gauge number of the 3. wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Table a.) When using more than one extension 4. cord to make up ...

Page 8 - COMPONENTS; aSSEMbLY INSTRUCTIONS; from the tool. Line up the holes on

SKU 67256 For technical questions, please call 1-800-444-3353. Page 8 COMPONENTS Angled Scraper (4) Tool Angled Cutter Blade (501) Half Moon Cutter Blade (503) (not shown): Two replacement Carbon Brushes (40) Sanding Sheets (504) Sanding Pad (502) Hex Wrench (505) Power Switch (44) ON OFF Small Wash...

Page 9 - Figure d; Figure E; side of the Large Washer is toward; Figure F

SKU 67256 For technical questions, please call 1-800-444-3353. Page 9 be mounted at angles up to 90° left or right. Figure d Angled Cutter Blade (501) Note: The long Angled Cutter Blade (501) should only be used in the straight ahead position. (See Figure d.) Place Large Washer, cupped side down Fig...

Page 10 - OPERaTINg INSTRUCTIONS; Work Piece and Work area Set Up; When finished, turn off the tool and

SKU 67256 For technical questions, please call 1-800-444-3353. Page 10 OPERaTINg INSTRUCTIONS Read the ENTIRE IMPORTaNT SaFETY INFORMaTION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Work Piece and Work area Set Up Design...

Page 12 - Troubleshooting; Problem; tool. disconnect power supply before service.

SKU 67256 For technical questions, please call 1-800-444-3353. Page 12 Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. Cord not connected. 1. No power at outlet. 2. Internal damage or wear. 3. (Carbon brushes or switch, for example.) Check that cord is plugged in. 1. Ch...

Page 13 - PaRTS LIST aNd aSSEMbLY dIagRaM

SKU 67256 For technical questions, please call 1-800-444-3353. Page 13 PaRTS LIST aNd aSSEMbLY dIagRaM Part description Qty 1 Cap Screw (M8 x 1.25 x 12) 1 2 Small Washer 1 3 Large Washer 1 4 Angled Scraper 1 5 Spindle 1 6 Rubber Casing 1 7 Circlip for Shaft 26 1 8 Spline Spring Washer 1 9 Bearing (6...

Page 14 - Record Product’s Serial Number; LIMITEd 90 daY WaRRaNTY; 491 Mission Oaks Blvd. • PO Box

SKU 67256 For technical questions, please call 1-800-444-3353. Page 14 Record Product’s Serial Number here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as re...