Chicago Electric 66910 - Manuals

Page 2 - SaVE tHIS Manual; Keep this manual for the safety warnings; IMPORtant SaFEty; Power Cord Safety; Extension Cord - Make sure your

Page 2 For technical questions, please call 1-800-444-3353. SKU 66910 SaVE tHIS Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of pur...

Page 4 - Personal Safety; finger on the power switch. Be sure the; Keep hands away from the blades.; Equipment use and Care; Check for damaged parts - Before using

Page 4 For technical questions, please call 1-800-444-3353. SKU 66910 to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way. This design is referred to as double-insulated, indicated by . WARNING: Handling the cord on this 9...

Page 5 - general Safety

Page 5 For technical questions, please call 1-800-444-3353. SKU 66910 for misalignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. Any part that is damaged should be properly repaired or replaced by a qualified technic...

Page 6 - SaVE tHESE; SPECIFICatIOnS; unPaCKIng; When unpacking, make sure the item

Page 6 For technical questions, please call 1-800-444-3353. SKU 66910 factors which cannot be built into this product, but must be supplied by the operator. SaVE tHESE InStRuCtIOnS. SPECIFICatIOnS ElectricalRequirements 120V~ / 60Hz / 15AMotor Speed: 3460 RPM Cutting Capacity 1-1/4” Diameter Maximum...

Page 7 - Phase 1; Secure front Axle in place using Curved; aSSEMBly; For additional information regarding the

Page 7 For technical questions, please call 1-800-444-3353. SKU 66910 REV 10h Phase 1 note: Leave Bolts (28, 32) only finger tight until the end of Phase 2. Place cupped side of Curved Washers (27) against legs (24, 26) during assembly. Place Axles (25) into Legs (24, 26). 1a. note the position of l...

Page 8 - Phase 2; Carefully place motor assembly on floor

Page 8 For technical questions, please call 1-800-444-3353. SKU 66910 Phase 2 Carefully place motor assembly on floor 2a. with Main Housing (14) facing down. Main Housing may bend if dropped. Flip Leg assembly over, and squeeze 2b. legs together to allow them to be inserted into motor assembly. Line...

Page 9 - Phase 3; Attach the Brace (77) to one of the Legs

Page 9 For technical questions, please call 1-800-444-3353. SKU 66910 Phase 3 Place the Hopper (1) onto the Main 3a. Housing (14), lining up the three holes in the Main Housing. Secure the Hopper in place using three Washers (8), Spring Washers (6) and Safety Screws (7). Attach the Brace (77) to one...

Page 10 - Product Features; FIguRE D; FIguRE E; OPERatIng InStRuCtIOnS; While the machine is running,

Page 10 For technical questions, please call 1-800-444-3353. SKU 66910 Product Features POWER SWItCH (42) CIRCuIt BREaKER (39) FEED StICK (76) FIguRE D HOPPER (1) POWER CORD (37) tIE-DOWn KnOBS (11) CHutE (67) FIguRE E MaIn HOuSIng (14) OPERatIng InStRuCtIOnS Read the EntIRE IMPORtant SaFEty InFORMa...

Page 11 - nOtE: Performance will decrease as

Page 11 For technical questions, please call 1-800-444-3353. SKU 66910 Do not force the Chipper Shredder. Let 8. the natural suction process take in the material to be cut. Always stand clear and to the side of the Chute (67). (See Figure E.) Without putting your hands into the 9. Hopper (1), slowly...

Page 12 - Procedures not specifically; BEFORE EACH USE, inspect the; Blade Reversal/Removal; PERIODICally, inspect the two; Reverse; to reverse the Blades:; Then retighten the Screws to secure the

Page 12 For technical questions, please call 1-800-444-3353. SKU 66910 MaIntEnanCE anD SERVICIng Procedures not specifically explained in this manual must be performed only by a qualified technician. tO PREVEnt SERIOuS InJuRy FROM aCCIDEntal OPERatIOn OR ElECtRIC SHOCK: turn the Power Switch (42) of...

Page 13 - tROuBlESHOOtIng

Page 13 For technical questions, please call 1-800-444-3353. SKU 66910 tROuBlESHOOtIng tO PREVEnt SERIOuS InJuRy FROM aCCIDEntal OPERatIOn OR ElECtRIC SHOCK: turn the Power Switch (42) of the Chipper Shredder to its “OFF” position and unplug the unit from its electrical outlet before performing any ...

Page 14 - PaRtS lISt; Part

Page 14 For technical questions, please call 1-800-444-3353. SKU 66910 PaRtS lISt Part Description Qty. 1 Hopper 1 2 Hopper Flap 1 3 Press Board 1 4 Screw 3 5 Lock Nut 3 6 Flat Washer 3 7 Safety Screw 3 8 Washer 3 9 Cover 2 10 Nut 2 11 Tie-Down Knob 2 13 Bolt 2 14 Main Housing 1 15 Bolt 1 16 Spring ...

Page 15 - aSSEMBly DIagRaM

Page 15 For technical questions, please call 1-800-444-3353. SKU 66910 REV 10g aSSEMBly DIagRaM n O t E: 5mm a llen W rench (79) not shown. 6mm a llen W rench (80) not shown. 14mm-17mm W rench (82) not shown.

Page 16 - lIMItED 90 Day WaRRanty; Harbor Freight Tools Co. makes every effort; PlEaSE REaD tHE; If product has no serial number, record

Page 16 For technical questions, please call 1-800-444-3353. SKU 66910 lIMItED 90 Day WaRRanty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...