Chicago Electric 66615 - Manuals

Page 2 - SaVE THIS MaNuaL; IMPORTaNT SaFETY; general Power Tool Safety Warnings; warnings and instructions may result; presence of flammable liquids, gases; Power tools create sparks

Page 2 For technical questions, please call 1-800-444-3353. SKU 66615 SaVE THIS MaNuaL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - under the influence of drugs, alcohol

Page 3 For technical questions, please call 1-800-444-3353. SKU 66615 increased risk of electric shock if your body is grounded. do not expose power tools to rain or c. wet conditions. Water entering a power tool will increase the risk of electric shock.do not abuse the cord. Never use d. the cord f...

Page 4 - qualified repair person using only; Safety Warnings Common for; illustrations and specifications; may result in electric shock, fire and/or; are not specifically designed; their RATED SPEED can break and fly; must properly fit the spindle of the

Page 4 For technical questions, please call 1-800-444-3353. SKU 66615 the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.Store idle power tools out of the reach d. of chil...

Page 5 - be capable of stopping flying debris; of stopping flying debris generated by

Page 5 For technical questions, please call 1-800-444-3353. SKU 66615 for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory. after inspecting and installing an accessory, position yourself a...

Page 6 - Kickback and Related Warnings

Page 6 For technical questions, please call 1-800-444-3353. SKU 66615 Use clamps (not included) or other 21. practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control and personal injury.This pro...

Page 7 - Maintain a firm grip on the power; rotating accessory and cause loss of; Safety Warnings Specific for

Page 7 For technical questions, please call 1-800-444-3353. SKU 66615 Maintain a firm grip on the power 1. tool and position your body and arm to allow you to resist kickback forces. always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The o...

Page 8 - SaVE THESE; gROuNdINg; Check with a qualified electrician; double Insulated Tools: Tools with; double insulation system which satisfies; Extension Cords; Grounded

Page 8 For technical questions, please call 1-800-444-3353. SKU 66615 Use tools with the lowest vibration when 4. there is a choice between different processes. Include vibration-free periods each day 5. of work.Grip tool as lightly as possible (while still 6. keeping safe control of it). Let the to...

Page 9 - cord or have it repaired by a qualified; Symbology

Page 9 For technical questions, please call 1-800-444-3353. SKU 66615 When using more than one extension 4. cord to make up the total length, make sure each cord contains at least the minimum wire size required. (See Table a.) If you are using one extension cord for 5. more than one tool, add the na...

Page 10 - SPECIFICaTIONS; uNPaCKINg; aSSEMBLY; release pressure on the Spindle Lock.

Page 10 For technical questions, please call 1-800-444-3353. SKU 66615 SPECIFICaTIONS Electrical Specifications 120 V~ / 60 Hz / 10 A No load speed 1000~3500 RPM Maximum Accessory Size 7” Diameter Mounting Disc Type 7” Hook & Loop Variable Speed Switch Sliding Button (+ & -) Display Unit of ...

Page 11 - OPERaTINg INSTRuCTIONS; Tool Set up; Disc simply press the accessory firmly; Work Piece and Work area Set up

Page 11 For technical questions, please call 1-800-444-3353. SKU 66615 OPERaTINg INSTRuCTIONS Read the ENTIRE IMPORTaNT SaFETY INFORMaTION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set up TO PREVENT SERIOuS INjuRY ...

Page 12 - general Operating Instructions; only while it is held firmly against the; “ON”; FIguRE C; When first applying wax to the object,; “OFF”

Page 12 For technical questions, please call 1-800-444-3353. SKU 66615 general Operating Instructions To Wax an Object: Attach the Foam Bonnet (53) to the 1. Mounting Disc (51) as previously discussed in this manual. NOTE: Prior to waxing an object, make sure the surface has been thoroughly cleaned ...

Page 13 - minimal pressure

Page 13 For technical questions, please call 1-800-444-3353. SKU 66615 Allow sufficient time for the polishing 11. liquid or wax to dry on the object. To Polish an Object: Attach the Polishing Bonnet (52) to 1. the Mounting Disc (51) as previously discussed in this manual. (See Figures a and B.) Plu...

Page 14 - Procedures not specifically; Cleaning; Then machine-dry the Bonnets at; only be done by a qualified service; First remove Right and Left Handles; replaced only by a qualified service

Page 14 For technical questions, please call 1-800-444-3353. SKU 66615 MaINTENaNCE aNd SERVICINg Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOuS INjuRY FROM aCCIdENTaL OPERaTION: Turn the Power Switch (11) off and unplug the P...

Page 15 - Troubleshooting; Problem; disconnect power supply before service.

Page 15 For technical questions, please call 1-800-444-3353. SKU 66615 Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. Cord not connected. 1. No power at outlet. 2. Internal damage or wear. (Carbon 3. brushes or switch, for example.) Check that cord is plugged in. 1. Ch...

Page 16 - PLEaSE REad THE FOLLOWINg CaREFuLLY

Page 16 For technical questions, please call 1-800-444-3353. SKU 66615 Part description Qty. 1 Screw 5 2 Right Handle 1 4 Circuit Board 1 5 Power Cord & Plug 1 6 Cord Stress Relief 1 7 Cord Retaining Bracket 1 8 Screw 2 9 Left Handle 1 10 Display 1 11 Power Switch 1 12 – Speed Button 1 13 + Spee...

Page 17 - aSSEMBLY dIagRaM; individually as replacement parts.

Page 17 For technical questions, please call 1-800-444-3353. SKU 66615 aSSEMBLY dIagRaM 34 35 37 38 39 36 40 4142 43 44 45 46 47 48 49 50 51 52 33 32 31 30 29 28 27 19 18 17 16 15 1 2 14 13 12 4 11 10 9 22 23 24 25 26 8 7 6 5 Foam Bonnet (53) not shown. Sanding disc (54) not shown. (See Figure a, pa...

Page 18 - LIMITEd 90 daY WaRRaNTY; ExPRESSLy IN LIEU OF ALL OTHER

Page 18 For technical questions, please call 1-800-444-3353. SKU 66615 LIMITEd 90 daY WaRRaNTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...