Chicago Electric 46804 - Manuals

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA

SKU 46804 For technical questions, please call 1-800-444-3353. Page 2 PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly,operating, inspection, maintenance and cleaning procedures, parts list and as-sembly diagram. Keep your invoice wi...

Page 4 - TOOL USE AND CARE

SKU 46804 For technical questions, please call 1-800-444-3353. Page 4 12. Avoid accidental starting. Be sure the Power Switch is off before pluggingin. Carrying power tools with your finger on the Trigger invites accidents. 13. Remove adjusting keys or wrenches before turning the power tool on. Awre...

Page 5 - SPECIFIC SAFETY RULES; Always keep the extension cord away from moving parts on the tool.

SKU 46804 For technical questions, please call 1-800-444-3353. Page 5 23. Use only accessories that are recommended by the manufacturer for yourmodel. Accessories that may be suitable for one tool may become hazardouswhen used on another tool. SERVICE 24. Tool service must be performed only by quali...

Page 7 - GROUNDING; outlet installed by a qualified electrician.

SKU 46804 For technical questions, please call 1-800-444-3353. Page 7 GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power co...

Page 8 - FIGURE B; EXTENSION CORDS; DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS

SKU 46804 For technical questions, please call 1-800-444-3353. Page 8 FIGURE B 4. Tools marked “Double Insulated” do not require grounding. They have a specialdouble insulation system which satisfies OSHA requirements and complies withthe applicable standards of Underwriters Laboratories, Inc., the ...

Page 9 - SYMBOLOGY; RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

SKU 46804 For technical questions, please call 1-800-444-3353. Page 9 6. If you are using an extension cord outdoors, make sure it is marked with thesuffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure your extension cord is properly wired and in good electrical co...

Page 10 - prior to making any adjustments to the tool.

SKU 46804 For technical questions, please call 1-800-444-3353. Page 10 UNPACKING When unpacking, check to make sure all the parts shown on the Parts List on page 14are included. If any parts are missing or broken, please call Harbor Freight Tools at thenumber shown on the cover of this manual as soo...

Page 11 - level on the top of the Drill.

SKU 46804 For technical questions, please call 1-800-444-3353. Page 11 FIGURE 2 Chuck Key (22) in hole. Jaws Using the Lock ButtonWhen you are drilling forextended times and want totake your finger off of theTrigger, use the Lock Button. Squeeze the Trigger to star t thedrill, then push the Lock But...

Page 13 - Do not use damaged equipment.; Periodically check the mounting screws and tighten if necessary.

SKU 46804 For technical questions, please call 1-800-444-3353. Page 13 INSPECTION, MAINTENANCE, AND CLEANING 1. WARNING! Make sure that the tool is unplugged from its electrical outletbefore performing any inspection, maintenance, or cleaning procedures. 2. BEFORE EACH USE, inspect the general condi...

Page 15 - ASSEMBLY DIAGRAM

SKU 46804 For technical questions, please call 1-800-444-3353. Page 15 NOTE: Some par ts are listed and shown for illustration purposes only, and are notavailable individually as replacement parts. ASSEMBLY DIAGRAM The Chuck Key (22) is not shown.