Chicago Electric 45416 - Manuals

Page 2 - Read all instructions before using this tool!; rust. Always lock up tools and keep out of reach of children.; Specifications

Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions,operating and maintenance procedures, parts list and diagram. Keep your invoice with thismanual. Write the invoice number on the inside of the front cover. Keep the manual andinvoice in a safe an...

Page 3 - across running machines.; Disconnect power. Unplug connected appliances when not in use.; starting the generator.; WARNING

8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. 9. Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect toolcords periodically and,...

Page 4 - Electric Generator Safety Precautions and Warnings; Always follow national and local safety codes.

Electric Generator Safety Precautions and Warnings 1. The Generator produces electrical current. Improper use can result in electrocution, injury or death. Only a qualified technician should service or repair this generator. 2. The Generator was designed to be used in a dry area. Do not expose to ra...

Page 5 - MOUNTING PLATE; FOR; GENERATOR / ALTERNATOR 10KW

SKU 45416 Page 5 REV 04/02 MOUNTING PLATE FOR GENERATOR / ALTERNATOR 10KW SKU 45416 A mounting plate (not included), similar to the one illustrated below, will need to be provided by thecustomer to properly and safely mount and operate the generator/alternator. The plate is needed toproperly tension...

Page 7 - that the pulley set screws are properly tightened.; Operation; Star t the motor driver.

Unpacking When unpacking, check to make sure the Generator is complete. If any parts are missing orbroken, please call Harbor Freight Tools at the number on the cover of this manual as soonas possible. Installation 1. Verify that the driver motor is securely mounted to a stable surface (see Mounting...

Page 8 - Maintenance

5. When you are finished using the Generator, stop the motor driver, then disconnect the appliances. Maintenance WARNING: Before performing any maintenance on the Generator, the motor driver mustbe off, and the Generator must be allowed to cool down after use. 1. Clean the Generator with compressed ...

Page 9 - Parts List; Description

Parts List PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THISMANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTORMAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE ORSHE IS QUALIFIED TO MAKE ANY REPAI...

Page 10 - Assembly Drawing

Assembly Drawing NOTE: Some parts are listed and shownfor illustration purposes only and are notavailable individually as replacementpar ts. SKU 45416 Page 10 REV 04/02; 04/03; 09/03 Note: Voltmeters (#29) located onWiring Box are not shown.

Page 11 - Schematic Diagram

SKU 45416 Page 11 R E V 0 9 / 0 5 Schematic Diagram