Chicago Electric 43424 - Manuals

Page 2 - PRODUCT SPECIFICATIONS; Item; SAVE THIS MANUAL; READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 2 PRODUCT SPECIFICATIONS Item Description Electrical Requirements 120 Volt / 60 Hz / Single Phase / .75 Amp Pad Diameter 10” Oscillations Per Minute 3,000 Orbital Design Direct Drive Power Switch Type Toggle Accessories Waxing Bonne...

Page 4 - TOOL USE AND CARE

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 4 11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.Keep your hair, clothing, and gloves away from moving parts. Looseclothes, jewelry, or long hair can be caught in moving parts. 12. Avoid accidental star...

Page 5 - SPECIFIC SAFETY RULES; Always keep the extension cord away from moving parts on the tool.

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 5 22. Check for misalignment or binding of moving parts, breakage of parts, andany other condition that may affect the tool’s operation. If damaged, havethe tool serviced before using. Many accidents are caused by poorly main-tained...

Page 7 - GROUNDING; outlet installed by a qualified electrician.

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 7 GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualfified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power c...

Page 8 - EXTENSION CORDS

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 8 FIGURE B DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS 4. Tools marked “Double Insulated” do not require grounding. They have a specialdouble insulation system which satisfies OSHA requirements and complies withthe applicable...

Page 9 - RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*; FIGURE C; SYMBOLOGY

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 9 6. If you are using an extension cord outdoors, make sure it is marked with thesuffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure your extension cord is properly wired and in good electrical co...

Page 10 - prior to making any adjustments to the tool.; IMPORTANT

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 10 UNPACKING When unpacking, check to make sure all the parts shown on the Parts List on page 14are included. If any parts are missing or broken, please call Harbor Freight Tools at thenumber shown on the cover of this manual as soo...

Page 11 - FIGURE D; Allow sufficient time for the wax to dry on the vehicle.

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 11 10. After the wax has been applied to the vehicle’s surface, turn the Power Switch(part #26) to its “OFF” position. Then unplug the Power Cord (part #25) from theelectrical extension cord, and unplug the extension cord from the g...

Page 13 - PLEASE READ THE FOLLOWING CAREFULLY

SKU 43424 For technical questions, please call 1-800-444-3353. PAGE 13 6. The Waxing/Polishing Bonnets (parts #30, #31) may be machine-washed, in coldwater, with detergent. Then, machine-dry the Bonnets at medium heat. 7. Use only a clean cloth and mild detergent to clean the body of theWaxer/Polish...