Chicago Electric 42933 - Manuals

Page 2 - cOntentS; IMpORtAnt SAFetY; geneRAL tOOL SAFetY

SKU 42933 For technical questions, please call 1-800-444-3353. Page 2 cOntentS IMpORtAnt SAFetY InFORMAtIOn ........................... 3 geneRAL tOOL SAFetY WARnIngS ..................................... 3 gROunDIng InStRuctIOnS .... 5 110-120 V~ gROunDeD tOOLS: tOOLS WItH tHRee pROng pLugS ..........

Page 3 - SAVe tHIS MAnuAL; general tool Safety Warnings; Failure to follow the warnings and

SKU 42933 For technical questions, please call 1-800-444-3353. Page 3 SAVe tHIS MAnuAL Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...

Page 5 - gROunDIng InStRuctIOnS; with three prong plugs; will not fit the outlet, have the proper; Radial Arm Saw Safety Warnings

SKU 42933 For technical questions, please call 1-800-444-3353. Page 5 NEVER LEAVE TOOL RUNNING 21. UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. gROunDIng InStRuctIOnS tO pReVent eLectRIc SHOck AnD DeAtH FROM IncORRect gROunDIng WIRe cOnnectIOn ReAD AnD FOLLOW tHeSe...

Page 7 - ferent stick design may be used if it properly; Diagram not to scale.; Handle notch

SKU 42933 For technical questions, please call 1-800-444-3353. Page 7 essential Straight push-stick Features and Functions note: Straight style (traditional) stick shown. A dif- ferent stick design may be used if it properly protects against all hazards. Diagram not to scale. Push sticks must be mad...

Page 9 - Vibration Safety; first be examined by a doctor and; SAVe tHeSe

SKU 42933 For technical questions, please call 1-800-444-3353. Page 9 a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (Califor- nia Health & Safety Code § 25249.5, et seq. ) The warnings, precautions, and in- 3...

Page 10 - slide or tip over. Affix to floor if nec

SKU 42933 For technical questions, please call 1-800-444-3353. Page 10 ReV 01c SpecIFIcAtIOnS Power Requirements 120 V~, 60 Hz, 1-ph 20.9 A (start); 6.9 A (load); 1330 W Motor 1-3/4 HP, 4200 spindle RPM, electric brake Saw Blade 8-1/4” (dia.) Arbor 5/8” Crosscut Distance 11” (maximum) Rip Cut Distan...

Page 12 - OpeRAtIng cOntROLS; for rip cutting only; carriage Lock

SKU 42933 For technical questions, please call 1-800-444-3353. Page 12 OpeRAtIng cOntROLS Elevating Handle (88) Yoke Pivot Clamp Handle (88) Safety Guard (10) Arm Index Knob (115) Screw Clamp (137) Switch (122) with Key (98) Trigger Bevel Index Knob (74) Bevel Lock Knob (71) Lock On Button Safety Gu...

Page 14 - ADjuStMentS; cord to the Radial Arm Saw.; framing square to check for flatness

SKU 42933 For technical questions, please call 1-800-444-3353. Page 14 ADjuStMentS The following checks, and possible adjust- ments, should be done in the order listed before beginning operation. WARnIng: For safety, unplug the line cord to the Radial Arm Saw. Tables A (127), B (126), and C (125) 1....

Page 15 - cuttIng keRF MARkS

SKU 42933 For technical questions, please call 1-800-444-3353. Page 15 cuttIng keRF MARkS In order to move the Saw Blade into different cutting positions, kerf marks (or grooves) must be cut into the worktable. It is recommended to cut grooves into a piece of 1/4” plywood mounted to the sur- face of...

Page 16 - OpeRAtIOn; cross cutting

SKU 42933 For technical questions, please call 1-800-444-3353. Page 16 OpeRAtIOn WARnIng: the Radial Arm Saw can be very dangerous and cause serious injuries if not operated properly. Review all safety precautions be- fore operating. keep hands out of the path of the moving Saw Blade. cross cutting ...

Page 19 - MAIntenAnce; tenance, remove the Line cord; by a qualified technician.

SKU 42933 For technical questions, please call 1-800-444-3353. Page 19 MAIntenAnce cAutIOn: Before performing any main- tenance, remove the Line cord from the electrical outlet. Yoke Tightness – Periodically check 1. and tighten the yoke Clamp Handle (66). Over time this handle may become loose and ...

Page 20 - troubleshooting

SKU 42933 For technical questions, please call 1-800-444-3353. Page 20 troubleshooting pROBLeM cAuSe SOLutIOn Saw will not make a square crosscut or a good 60° mitre cut. Arm is not perpendicular to the rip fence 1. Too much play between the arm and column 2. Yoke too loose when clamped to carriage ...

Page 21 - pARtS LISt

SKU 42933 For technical questions, please call 1-800-444-3353. Page 21 part Description Q’ty 1 Nameplate 1 2 Screw M5×8 2 3 Washer 5 1 4 Dust Guide 1 5 Yoke Index Knob 3 6 Nut M6 69 7 Guard Clamping Screw 1 8 Flexible Guard 1 9 Label 1 10 Safety Guard 1 11 Guard Plate 1 12 Spring Washer 5 1 13 Anti-...

Page 22 - able individually as replacement parts.

SKU 42933 For technical questions, please call 1-800-444-3353. Page 22 Record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as ...

Page 24 - LIMIteD 90 DAY WARRAntY; ER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MER-

pLeASe ReAD tHe FOLLOWIng cAReFuLLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO TH...