Chauvet 86 - Manuals - manualsarea.com

Page 3 - What is included; Icons

1. Before You Begin 3 1/6/2010 10:35 AM 1. B EFORE Y OU B EGIN What is included  1 x DIAMONDsplash ™ 86  1 x Warranty Card  1 x User Manual Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have b...

Page 4 - Safety Instructions

1. Before You Begin 4 1/6/2010 10:35 AM Safety Instructions Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. Always make sure that you are connecting to the proper voltage, and that the line voltage y...

Page 5 - NTRODUCTION; Features; A d d i t i o n a l F e a t u r e s; Product Overview

2. Introduction 5 1/6/2010 10:35 AM 2. I NTRODUCTION Features 2-channel DMX-512 white narrow beam LED wash Blackout/static/dimmer/strobe/pulse Static color, strobing and pulse effects with or without DMX controller A d d i t i o n a l F e a t u r e s Additional power output: max 37 units Built-in au...

Page 6 - ETUP; AC Power; Power Linking; Fixture 1

3. Setup 6 1/6/2010 10:35 AM 3. S ETUP AC Power This fixture runs on 100~240 VAC, 50/60 Hz. Before powering on the unit, make sure the line voltage to which you are connecting it is within the range of accepted voltages. Always connect the fixture to a switched circuit. Never connect the fixture to ...

Page 7 - Mounting; Orientation; Rigging

3. Setup 7 1/6/2010 10:35 AM Mounting Bracket Mounting Orientation The DIAMONDsplash ™ 86 may be mounted in any safe position, provided there is adequate room for ventilation. Rigging Be sure that the structure can support the weight of the fixture. Please see the “Technical Specifications” section ...

Page 8 - Configuring the Starting Address; Automatic

4. Operating Instructions 8 1/6/2010 10:35 AM 4. O PERATING I NSTRUCTIONS Configuring the Starting Address Each fixture requires a starting address from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the starting address. For example, ...

Page 9 - Static; DMX Channel Values

4. Operating Instructions 9 1/6/2010 10:35 AM Sound-Active This fixture has a sound-triggered mode. This is accessed via the DIP switches on the back of the fixture, and the sensitivity may be adjusted using the audio sensitivity adjustment knob. Please see the chart below for further explanation. M...

Page 10 - PPENDIX; DMX Primer

5. Appendix 10 1/6/2010 10:35 AM 5. A PPENDIX DMX Primer There are 512 channels in a DMX connection. Channels may be assigned in any manner. A fixture capable of receiving DMX will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates t...

Page 11 - Data Cabling; DMX Data Cable; Cable Connectors

5. Appendix 11 1/6/2010 10:35 AM Data Cabling To link fixtures together you must obtain data cables. You can purchase CHAUVET® certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a hig...

Page 12 - Setting up a DMX Serial Data Link

5. Appendix 12 1/6/2010 10:35 AM This drawing provides a general illustration of the DMX input/output panel of a lighting fixture. Universal DMX Controller Continue the link 3-Pin to 5-Pin Conversion Chart If you use a controller with a 5-pin DMX output connector, you will need to use a 5-pin to 3-p...

Page 13 - Contact Us; W o r l d W i d e

5. Appendix 13 1/6/2010 10:35 AM Setting the Starting Address This DMX mode enables the use of a universal DMX controller device. Each fixture requires a start address from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start addre...

Page 14 - Returns Procedure; Claims

5. Appendix 14 1/6/2010 10:35 AM Returns Procedure Returned merchandise must be sent prepaid and in the original packing; call tags will not be issued. Package must be clearly labeled with a Return Merchandize Authorization Number (RMA #). Products returned without the RMA # will be refused. Call CH...

Page 15 - Technical Specifications

Technical Specifications 15 1/6/2010 10:35 AM Technical Specifications WEIGHT & DIMENSIONS Length .......................................................................................................................... 4.9 in (124 mm) Width.........................................................