Page 2 - Edition Notes; © Copyright 2011 CHAUVET®. All rights reserved.
Edition Notes Q-Wash 560Z-LED User Manual Rev. 12 Edition Notes The Q-Wash 560Z-LED User Manual Rev. 12 covers the description, safety precautions, installation, programming, operation, and maintenance of the Q-Wash 560Z-LED. CHAUVET® released this edition of the Q-Wash 560Z-LED User Manual in Novem...
Page 3 - Table of Contents
Table of Contents Q-Wash 560Z-LED User Manual Rev. 12 -i- Table of Contents 1. Before You Begin ................................................................................................ 1 What Is Included .........................................................................................
Page 5 - Before You Begin; Convention
Before You Begin Q-Wash 560Z-LED User Manual Rev. 12 -1- 1. Before You Begin What Is Included One Q-Wash 560Z-LED One IEC Power Cord with Edison Plug (US market) One Safety Cable Two Omega Brackets Warranty Card Quick Reference Guide Unpacking Instructions Immediately upon receiving this...
Page 6 - Icon Indications; Icon; Product at a
Before You Begin -2- Q-Wash 560Z-LED User Manual Rev. 12 Icon Indications Icon This icon indicates . . . Critical installation, configuration, or operation information. Failure to comply with this information may render the product partially or completely inoperative, damage third-party equipment, o...
Page 7 - Safety Notes; Expected LED
Before You Begin Q-Wash 560Z-LED User Manual Rev. 12 -3- Safety Notes Read all the following Safety Notes before working with this product. These Notes include important information about the installation, usage, and maintenance of this product. There are no user serviceable parts in this product. A...
Page 8 - Introduction; Product; Additional; Features
Introduction -4- Q-Wash 560Z-LED User Manual Rev. 12 2. Introduction Product Description The Q-Wash 560Z-LED is an RGBWA LED moving yoke wash product. The Q-Wash 560Z-LED consists of a base section and a moving yoke with a pan range of up to 540º. The moving head, which has a tilt range of 270º, con...
Page 9 - Product Overview; FRONT
Introduction Q-Wash 560Z-LED User Manual Rev. 12 -5- Product Overview Power Input IEC Socket Power Switch Fuse holder 3 ‐ pin DMX In 3 ‐ pin DMX Out 5 ‐ pin DMX Out 5 ‐ pin DMX In Control panel FRONT BACK
Page 10 - Product Dimensions
Introduction -6- Q-Wash 560Z-LED User Manual Rev. 12 Product Dimensions
Page 11 - Setup; AC Power; AC Plug; Connection; Fuse Replacement
Setup Q-Wash 560Z-LED User Manual Rev. 12 -7- 3. Setup AC Power The Q-Wash 560Z-LED has an auto-ranging power supply that works with an input voltage range of 100~240 VAC, 50/60 Hz. Make sure that you are connecting this product to the proper voltage. To determine the power requirements for the Q-Wa...
Page 12 - DMX Linking; DMX Modes; Connectivity; The
Setup -8- Q-Wash 560Z-LED User Manual Rev. 12 DMX Linking You may link the Q-Wash 560Z-LED to a DMX controller using a standard DMX serial connection. If using other DMX compatible products with the Q-Wash 560Z-LED, you can control each individually with a single DMX controller. DMX Modes The Q-Wash...
Page 13 - Mounting; Orientation; Procedure
Setup Q-Wash 560Z-LED User Manual Rev. 12 -9- Mounting Before mounting this product, read and follow the Safety Notes in this manual. Orientation Always mount this product in a safe position with adequate room for ventilation, head motion, configuration, and maintenance. Rigging CHAUVET® recommends ...
Page 14 - Control Panel; Button; Control Options; DMX Operation; The highest possible starting address for each DMX mode is:; Operation; TEST
Operation -10- Q-Wash 560Z-LED User Manual Rev. 12 4. Operation Control Panel Description Button Function <MENU> Exits from the current menu or function <ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function <UP> Navigates upwar...
Page 15 - Display Mode
Operation Q-Wash 560Z-LED User Manual Rev. 12 -11- Master/Slave The Master/Slave mode enables a group of Q-Wash 560Z-LED products (the slaves) to simultaneously duplicate the output of another Q-Wash 560Z-LED (the master), whether auto/custom or test modes, without a DMX controller. 1. Set the maste...
Page 16 - Dimmer Curve
Operation -12- Q-Wash 560Z-LED User Manual Rev. 12 Dimmer Curve This setting determines how fast the output of the Q-Wash 560Z-LED changes when you modify the values of the Red, Green, Blue, White, Amber, and Dimmer faders. This setting provides four different options to simulate the dimming curve o...
Page 17 - Reset Control
Operation Q-Wash 560Z-LED User Manual Rev. 12 -13- Reset Control You are able to select how you reset the product, whether from the DMX controller or only from the control panel. 1. Go to MENU > SPECIAL > RESET . 2. Select DMX or SYSTEM . DMX: Enables the DMX controller to reset the product ( ...
Page 18 - Fan Control
Operation -14- Q-Wash 560Z-LED User Manual Rev. 12 Fan Control This option defines how you can control the fan speed, either from the DMX controller or only from the control panel. 1. Go to MENU > SPECIAL > FAN . 2. Select DMX or SYSTEM . DMX: Enables the DMX controller to control the fan spee...
Page 19 - System Default
Operation Q-Wash 560Z-LED User Manual Rev. 12 -15- System Default To restore all the product’s parameters to their default values, do the following: 1. Go to MENU > EXTRA . 2. Press <ENTER> ( PASSWORD ) will show on the display. 3. Press <ENTER> ( **** will show on the display). 4. En...
Page 20 - Level; Level
Operation -16- Q-Wash 560Z-LED User Manual Rev. 12 Menu Map 1 st Level 2 nd Level 3 rd Level Description INTRO ADDRESS 001~512 Selects a starting DMX address RESET NO/YES Resets the product’s custom settings FAN HIGH Select the fan’s operation mode. NOTE: The fan will go to High mode if the product’...
Page 21 - Extra Menu
Operation Q-Wash 560Z-LED User Manual Rev. 12 -17- 1 st Level 2 nd Level 3 rd Level Description EDIT (Cont.) DIMMER 000~255 Selects the dimmer value STROBE 01~20 Selects the strobe frequency and mode ZOOM 000~255 Select the zoom position DIMSPEED Selects the dimmer speed TIME Selects the step durati...
Page 22 - DMX Values; BASIC; Channel
Operation -18- Q-Wash 560Z-LED User Manual Rev. 12 DMX Values BASIC Channel Function Value Percent/Setting 1 Pan 000 255 0~540º 2 Tilt 000 255 0~270º 3 Red 000 255 0~100% 4 Green 000 255 0~100% 5 Blue 000 255 0~100% 6 White 000 255 0~100% 7 Amber 000 255 0~100% 8 Power and Color Macro ...
Page 23 - ADVANCED
Operation Q-Wash 560Z-LED User Manual Rev. 12 -19- ADVANCED Channel Function Value Percent/Setting 1 Pan 000 255 0~540º 2 Pan Fine 000 255 Fine movement control 3 Tilt 000 255 0~270º 4 Tilt Fine 000 255 Fine movement control 5 Pan/Tilt Speed 000 255 Fast~Slow 6 Red 000 255 0~100% 7 Green...
Page 25 - Technical Information; Refrain from spinning this product’s fans using compressed air.
Technical Information Q-Wash 560Z-LED User Manual Rev. 12 -21- 5. Technical Information Product Maintenance To maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. As a rule, cl...
Page 26 - Troubleshooting Guide; Symptom
Technical Information -22- Q-Wash 560Z-LED User Manual Rev. 12 Troubleshooting Guide Symptom Cause(s) Action(s) Product is on LEDs are off Product defaulted Configure product’s parameters Faulty LED board Send unit for repair Faulty LED Driver board Faulty LED Control board Faulty Display board Prod...
Page 27 - Returns
Technical Information Q-Wash 560Z-LED User Manual Rev. 12 -23- Returns Procedure You must send the merchandise prepaid, in the original box, and with the original packing and accessories. CHAUVET® will not issue call tags. Call CHAUVET® and request a Return Merchandise Authorization (RMA) number bef...
