Chauvet 64-36VWC - Manual - manualsarea.com

Page 2 - ABLE OF

© Copyright 2013 CHAUVET®. All Rights Reserved Information and specifications in this User Manual are subject to change without notice. CHAUVET® assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. T ABLE OF C ONTENTS 1. BEFORE YOU BEGIN.................

Page 3 - What is Included; Icons

LED Par 64-36VW B&C User Manual 3 Rev. 4 1. B EFORE Y OU B EGIN What is Included • 1 x LED Par 64-36VW B/C • 1 x Gel Frame • 1 x W arranty Card • 1 x User Manual Unpacking Instructions Immediately upon receiving a fixture, caref ully unpack the carton, check the contents to ensure that all parts...

Page 4 - Safety Instructions; NTRODUCTION; Features; Additional Features

LED Par 64-36VW B&C User Manual 4 Rev. 4 Safety Instructions • Please keep this User Manual f or future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. • Always make sure that you are connecting to the proper voltage, and that the line...

Page 5 - Product Overview

LED Par 64-36VW B&C User Manual 5 Rev. 4 Product Overview

Page 7 - ETUP; AC Power; Power Linking

LED Par 64-36VW B&C User Manual 7 Rev. 4 3. S ETUP AC Power This fixture has an auto-ranging power supply which accepts an input of 100~240 VAC, 50/60 Hz. Bef ore powering on the unit, make sure the line voltage to which you are connecting it is within the range of accepted voltages. Always conn...

Page 8 - Mounting; Orientation; Rigging

LED Par 64-36VW B&C User Manual 8 Rev. 4 Do not use a tool on the bracket adjustment knob Mounting Bracket Secondary bracket (used primarily for standing position) Aim the fixture with the gel frame release pointing up, (as shown in this diagram) Mounting Orientation The LED Par 64-36VW B/C may ...

Page 9 - Configuring the Starting Address

LED Par 64-36VW B&C User Manual 9 Rev. 4 4. O PERATING I NSTRUCTIONS Configuring the Starting Address Each fixture requires a starting address from 1~512. A fixture requiring one or more channels f or control begins to read the data on the channel indicated by the starting address. For example, ...

Page 10 - DMX Operation; Standalone Operation; Automatic

LED Par 64-36VW B&C User Manual 10 Rev. 4 DMX Operation This is the operating mode which will allow f or control with an external DMX controller. You must set the starting address f or this mode. If this is your first time using DMX, then it is recommended that you ref er to the “DMX Primer” sec...

Page 11 - Custom Static Color Mixing; DMX Channel Values; Setting the Starting Address

LED Par 64-36VW B&C User Manual 11 Rev. 4 Custom Static Color Mixing This fixture has the ability to accept custom static color settings. These are accessed via the control panel. Please see the instructions below f or further explanation. 1. Press <MENU> until U-- appears on the LED scree...

Page 12 - PPENDIX; Fixture Linking; Setting up a DMX Serial Data Link

LED Par 64-36VW B&C User Manual 12 Rev. 4 This drawing provides a general illustration of the DMX input/output panel of a lighting fixture. Universal DMX Controller Continue the link 5. A PPENDIX Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a ...

Page 13 - General Troubleshooting; General Maintenance

LED Par 64-36VW B&C User Manual 13 Rev. 4 General Troubleshooting S YMPT OM P OSSIBLE C AUSE ( S ) P OSSIBLE A CTION ( S ) Breaker/Fuse keeps blowing Excessive circuit load Check total load placed on the electrical circuit. Short circuit along the power wires Check f or a short in the electrical...

Page 14 - Return Procedure; Claims

LED Par 64-36VW B&C User Manual 14 Rev. 4 Return Procedure Returned merchandise must be sent prepaid and in the original packing; call tags will not be issued. Package must be clearly labeled with a Return Merchandize Authorization Number (RMA #). Products returned without the RMA # will be refu...

Chauvet 64-36VWC - Manual

Table of Contents:

Summary

Other Chauvet Models