Chauvet MINI 4 BAR 2.0 - Manual

Page 3 - Claims

Mini 4 Bar™ 2.0 User Manual (Rev. 03) Page 3 of 18 1. B EFORE YOU B EGIN What is Included  1 x Mini 4 Bar™ 2.0  1 x Carrying Bag  1 x Tripod  1 x Tripod Carrying Bag  1 x Footswitch  2 x Hanging Brackets with mounting hardware  1 x Power Cord  1 x Warranty Card  1 x Quick Reference Guide Un...

Page 5 - NTRODUCTION; Product Overview

Mini 4 Bar™ 2.0 User Manual (Rev. 03) Page 5 of 18 2. I NTRODUCTION Product Overview Product Dimensions Power Out Power In Microphone Text here Microphone Sensitivity Knob Footswitch Input LED Display DMX In/Out

Page 6 - ETUP; AC Power; Fuse; Always replace a blown fuse of the same type and rating.

Page 6 of 18 Mini 4 Bar™ 2.0 User Manual (Rev. 03) 3. S ETUP AC Power This product has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements for this product (circuit breaker, power outlet, and wiring), use the current ...

Page 7 - Power Linking; Power; Product; Product

Mini 4 Bar™ 2.0 User Manual (Rev. 03) Page 7 of 18 Power Linking This product provides power linking via the Edison outlet located in the back of the unit. Please see the diagram below for further explanation. Power Linking Diagram You can power link up to 18 Mini 4 Bar™ 2.0 units on 120 VAC o...

Page 8 - Orientation; Mounting

Page 8 of 18 Mini 4 Bar™ 2.0 User Manual (Rev. 03) Mounting Before mounting this product, read and follow the safety recommendations indicated in the Safety Notes section (page 2 of this manual). Orientation The Mini 4 Bar™ 2.0 may be mounted in any position; however, make sure adequate ventilation ...

Page 9 - PERATION; Control Panel; Menu Map; Mode; Configuration; Starting Address

Mini 4 Bar™ 2.0 User Manual (Rev. 03) Page 9 of 18 4. O PERATION Control Panel Operation To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview (page 5) to see the buttons location on the control panel. Button Function <MEN...

Page 10 - Sound Active; SND; Automatic Mode; AUTO

Page 10 of 18 Mini 4 Bar™ 2.0 User Manual (Rev. 03) Configuration (Standalone) Set this product in one of the standalone modes to control it without a DMX controller. 1. Connect this product to a suitable power outlet. 2. Turn this product on. Never connect a product that is operating in any standal...

Page 11 - Pedal; Disconnecting

Mini 4 Bar™ 2.0 User Manual (Rev. 03) Page 11 of 18 Footswitch Operation The included footswitch provides quick access to the preset colors, color change programs, and triggering via the onboard microphone on the Mini 4 Bar™ 2.0. Please see the chart, along with the set of instructions below for fur...

Page 12 - DMX Channel Assignments and Values; Channel

Page 12 of 18 Mini 4 Bar™ 2.0 User Manual (Rev. 03) DMX Channel Assignments and Values 15-CH Channel Function Value Setting 1 Control/Operating Mode 000  009 RGB color mixing mode 010  029 Auto program 1 030  049 Auto program 2 050  069 Auto program 3 070  089 Auto program 4 090  109 Auto prog...

Page 14 - General Troubleshooting

Page 14 of 18 Mini 4 Bar™ 2.0 User Manual (Rev. 03) General Troubleshooting Symptom Possible Cause Possible Action Circuit breaker or fuse keeps blowing  Excessive load on the circuit  Make sure that the total load does not exceed 80% of the breaker or fuse nominal current  Short circuit along th...

Page 16 - Starting

Page 16 of 18 Mini 4 Bar™ 2.0 User Manual (Rev. 03) DMX Primer The USITT DMX512-A data transmission protocol (DMX, from now on) is based on the EIA-485 standard and it has 512 channels (001 to 512). This system requires a controller (DMX controller), one or more DMX compatible products, and a DMX ci...

Chauvet MINI 4 BAR 2.0 - Manual

Table of Contents:

Summary

Other Chauvet Models