BT Diverse 2016 - Manuals

Setting up Follow these steps to get your Diverse 2016 ready for use. Warning1 For the handset use only approved nickel-cadmium (NiCad) rechargeable batteries.Never use other batteries or conventionalalkaline batteries. They could lead to ashor t circuit or destroy the batter y casing.Recommended ba...

2 Plug the 3-pin adaptorinto a mains power socketand switch on When the power is switched on, thecounter display on your base stationwill flash 00 for a few seconds and then go out. 3 Connect the telephoneline cord to the Diverse2016 base station Ensure that this is fitted cor rectlyinto the right s...

6 Fit the handset Belt clip Fit the belt clip onto the back of thehandset. 4 Plug your Diverse2016 into the phonesocket If you do not have a modern phonesocket, call Free fone 0800 800 150 and ask for a BT engineer to comeand fit the cor rect socket. This is achargeable ser vice. 5 Install therechar...

If the symbol flashes continuously, it means the handset iseither out of range or is not registeredwith the base station. To register,follow the steps on page 52. Alladditional handsets you purchase willneed to be individually registered withthe base station before they will workwith the Diverse 201...

Using your Diverse 2016 telephone 11 Making and receiving calls To make an external call Ensure the handset is switched ON. • Press the PHONE button. You hear the dial tone. The ‘In Use’light on the base station comeson. Display shows EXT . • Dial the number. The phone callsthe number and the displa...

Using your Diverse 2016 telephone 12 To redial any of the last five numbers • Press and release the LNR button to display the last five phonenumbers in turn. Each phonenumber can be up to 22 digitslong. • When the number you want todial is displayed, press the PHONE button. To end the call, press th...

To set or change the handset PIN (personal identification number) A PIN on your handset protectsinformation. A handset PIN is necessar y in orderto: • reset the speed dial memor y; • reset to the original defaultsettings. Handset power must be switched toON. • Press the STO button. • Press 8 then 9 ...

Or • Press 1 to allow external calls. Then • Press STO to confirm. Call barring Emergency Ser vices 999 and 112calls can still be made. Fromswitchboards you can dial accesscode 9 followed by 999 or 112, RCL button 999 or RCL button 112. To bar and cancel an individual handset from making external ca...

To cancel your own ‘special numbers’ • Press the STO button. • Press the # button. • Press the 2 button. • Press the 7 button. • Enter the system code (default 0000 ). • Press the STO button. 23 Using your Diverse 2016 telephone STO 2 A B C # 7 P Q R S 1 2 3 4 My Emergency numbers are

A pre-recorded message is built intothe Diverse 2016 as Message 1. Thismay be recorded over by yourself. Advisory announcement You can record an advisor yannouncement. This enables you to leave astatement for callers but does notallow them to leave a message. Using your Diverse 2016answering machine...

Using your Diverse 2016 answering machine 28 To play back your advisory announcement (A ) • Press the MODE button until the voice says ‘Answer Mode using Advisory Announcement’ . • Press the MODE button. Voice says ‘Mode’ . • Press the PLAY button. Your message is played back. • Stop playback at any...

To switch the answering machine on/off Press the ANSWER ON/OFF button. The machine is ON whenthe button lights up. It is OFF whenthe button is not lit up. The voicetells you which outgoing message/announcement is set. If you have anew message waiting, the lightflashes. On/Off Answer To set the day a...

Using your Diverse 2016 answering machine 30 To switch the day and time announcement off or on Your Diverse 2016 will automaticallyannounce the day and time aftereach message. This is the defaultsetting. You can switch this settingof f and back on again. • Press the STORE button. • Press the # butto...

or • Length = unlimited. • Press the STO button. • Press the # button. • Press the INT button. • Press the 9 button. • Enter the code 24 . • Press the STO button to confirm. Recording memos You can leave memo messages onyour Diverse 2016. You have thesame time to record a memo ascurrently set for in...

Using your Diverse 2016 answering machine 32 To play back new messages at the base station • Press the PLAY button. To play back all messages (this includes old messages) at the base station • Press and hold down the PLAY button for about a second. Youcan hear all new and oldmessages. When the recor...

To stop playback at the base station • Press the STOP button twice. To save messages at the base station You can save a message so it will beplayed back as though it was a newrecording next time you want tohear your messages. • Press the RECORD button twice during playback. The machineskips to the e...

Using your Diverse 2016 answering machine 34 To hear incoming calls Make sure the speaker volume isset to an audible level. • Press the STO button. • Press the # button. • Press the INT button. • Press the 9 button. • Enter the code 41 to switch the loudspeaker on for incomingmessages. or • Enter th...

To set a pause before each message play back Normally, your Diverse 2016 willplay back messages continuously.You can set it to pause betweenmessages. The next message willnot be played back until you pressthe SKIP 䊳 button. • Press the STO button. • Press the # button. • Press the INT button. • Pres...

36 O r From another external Touchtone TM phone • Dial your Diverse 2016 phone number. • When the Diverse 2016 takesyour call, enter the system code (this must be dif ferent fromthe default setting of 0000.See page 16 on how to changeyour system code). You hear a beep and the voice announces thecur ...

Remote access 40 To delete an outgoing message/announcement First select operating mode A1 , A2 or A by following the instr uctions on page 38 entitled ‘ To select theoperating mode’. • Press the 0 button. The voice announces, ‘Deleting’ . • Press the 7 button to confirm deletion. The voice says, ‘A...

Memo Announcement or advisor y message Intercom to base Help Call recording announcement 1 Call recording announcement 2 Advisor y message Help Message Announcement or advisor y message Help Play back new messages Mark message ‘new’ Help Skip backwards Play back all messages Skip for wards Gives dia...

42 Additional features Secrecy • To obtain secrecy on an externalcall, press the INT button. Display shows your handset’s internalnumber and you hear the internaldial tone. This allows you to talkto someone in the same room,without your caller hearing theconversation. Instead your callerhears a melo...

To change between ring priority and collective ringing The handset must be switched ON. • Press the STO button. • Press the # button. • Press the 1 button. • Enter the system code (default 0000 ). • Press the LNR button. • Press the ✱ button. • Press the 2 button and the 3 button. Display shows the ...

Additional features 45 To clear and reinstate handsets for collective ringing The default setting is for allhandsets to be set for collectiveringing. • Press the STO button. • Press the # button. • Press the 1 button. • Enter the system code (default 0000 ). • Press the LNR button. • Press the ✱ but...

Using your Diverse 2016with a Diverse ExecutiveHandset or DiversePocket Handset Your Diverse 2016 comes completewith a Diverse Handset. If you wish,you can use a Diverse 2000 ExecutiveHandset or a Diverse PocketHandset with the 2016 Base Station. To register your Executive/PocketHandset with your Di...

Using your Diverse 2016 with a Diverse Executive or Pocket Handset 47 The following instructions canbe found in your Executive/Pocket Handset User Guide. Adjusting Handset settings (including Handset volumes, tonesand confirmation tones). Call Transfer. Clearing numbers stored in the memor y. Interc...

49 Switchboard compatibility Setting the TONE orPULSE mode Your Diverse 2016 is preset toTONE dialling – where you hear atone beep each time you dial anumber. Tone dialling is suitable forall modern digital exchanges andswitchboards. So you will only needto use this if your switchboard usespulse dia...

Up to six handsets can beregistered and operated from theDiverse 2016 base station. Thesystem allows you to make inter nalintercom calls between twohandsets while a third is makingan exter nal call. Each additional handset youpurchase must be registered at thebase station. To register a handset The ...

Registering a new Diverse handset with the base station 53 At the handset: • Press and hold down the 1 button together with the PWR button until the display shows 1– and flashing . • Enter the 4 digit system code(default 0000 ). • Press the # button. The beeps stop after about 10 seconds, andthe dis...

Operating with additional base stations 55 How to set up multiplebase stations andhandsets To register additional Diverse 2016 handsets at more than one base station You can use up to six handsets oneach Diverse base station and up tofour base stations with your Diversehandset to build up acomprehen...

Maintenance General Simply clean the handset and basestation with a damp (not wet) clothor an antistatic wipe. Never usehousehold polish as this willdamage your Diverse 2016. Never use a dr y cloth as this maycause a static shock. Service Within the guarantee period If you experience a problem withy...

59 Help Emergency calls The emergency services can becontacted in the UK by dialling 999 , or 112 which is valid in any country that is a member of the EuropeanCommunity. Fully charged batteries do notindicate full power when putinto a handset When you replace handset batterieswith ones that have be...

Replacing handset batteries After a time, you may find that thehandset batteries are r unning outof charge more quickly. This is astandard sign of wear and thebatteries will need replacing. Recommended batteries shouldhave a power rating of 600m Ah1.2V. Batteries are available fromthe Diverse Helpli...

Help 61 the handset, see page 18.Check that the telephone isplugged into the phone socket.Is the Diverse 2016 set up for ringpriority at another handset? Seepage 43. Set the Diverse 2016 forcollective ringing. Cannot get through, even though a dialling tone can be heard You may be set to the wrongsi...

Technical information Environment Your Diverse 2016 should be keptfree of dust, moisture, hightemperature, vibration and shouldnot be exposed to direct sunlight.Do not stand it on carpets or othersur faces which generate fibres orplace it in locations which preventthe free flow of air over its sur f...

Technical specif ication Standard DECT Number of channels 120 duplex channels Radio frequency range 1880 MHz to 1900 MHz Duplex method Time-division multiplexing. 10 ms frame length Channel grid 1728 kHz Bit rate 1152 kbit/s Modulation GFSK Voice coding 32 kbit/s Transmitted power 10 mW, average out...

64 Index Additional handsets 43, 55 Adjusting number of rings 35 Advisor y announcement 27, 39 Access code/pause 50, 51 Answering machine 24 At a glance 1 Automatic base selection 56 Base stations (additional) 52 Batteries Charging 8 Installing 7 Low warning 9 Replacing 60 Belt clip 7 Call bar ring ...

APPROVED for connection to telecommunication systems specified in the instructions for use subject to the conditions set out in them CE compliant to 89/336/EEC(EMC Directive) & 73/23/EEC(Low Voltage Directive) Off ices in Europe, Nor th America,Japan and Asia Pacif ic. The telecommunications ser...