BT 900 - Manuals

4 Introduction your Synergy 900 is designed for ease of use and made to the high standards set by BT. Please read the instr uctions carefully before useand retain this user guide for future reference. DECT By purchasing the Synergy 900 you now own aproduct which combines the advantages ofcordless op...

6 Setting up follow these steps to get your Synergy 900 ready for use. BATTER Y Push Slide WARNING It is recommended that the line cord is notconnected until the handset is fully charged.This will prevent the risk of the phone beinganswered prior to the battery being fullycharged and therefore not w...

8 6. Connect the telephone line cord If you do not have modern phone sockets, callFreefone 0800 800 150 and ask for a BT engineer to come and fit the cor rect type. Thisis a chargeable ser vice. NOTE Take care that the telephone line cord andpower cable plugs are connected to the correctsockets. Inc...

9 Using your Synergy 900 Making and receiving calls To make a call • Press the TALK button to get a line. Display shows . The IN-USE light on the base station comes on. • Enter the number you want and it is dialled. Or to preview the number before you call • Enter the number you want. Display shows ...

To adjust the handset ringer volume The handset ringer can be set to LOW , HI or OFF . • Press the ➔ button several times until display shows SET UP . • Press the ✔ button. Display shows HANDSET . • Press the ✔ button. Display shows LEVEL . • Press the ➔ button several times until the display shows ...

17 NOTE: You must program your chosen emergencynumbers into all Additional Handsets. As wellas the handset supplied with your Synergy 900. Additional features Keypad Guard and EmergencyNumbers To enter up to four personal emergency numbers for use when the keypad guard is ON Your personal emergency ...

Call Diversion You can use your Synergy 900 to request thenetwork to diver t incoming calls to anothernumber. You can choose to diver t: – all calls;– calls that are not answered within 5 rings; or– calls when your line is already engaged. • Press the ➔ button. Display shows CALL DIVERT . • Press th...

Friends and Family This is where the telephone number of theFriends & Family ser vice is pre-programmedinto your Synergy 900, enabling you to dial theFriends & Family ser vice and follow theinstr uctions from the network to add or changenumbers. To set and update Friends and Family • Press t...

Editing select service numbers If the pre-programmed telephone numbers for‘friends and family’ changes you can update it. • Press the ➔ button several times until the display shows SET UP • Press the ✔ button. Display shows HANDSET • Press the ✔ button. Display shows LEVEL • Press the ➔ button sever...

24 Using additional handsets Registering an additional Synergyhandset with the base station or re- registering a handset Up to six handsets can be registered andoperated from the Synergy 900 base station. The system allows intercom calls between twohandsets while a third is making an external call. ...

26 To end an intercom call • Press the INTERCOM button. Or • Replace the handset on the base station or charger. Making and receiving external callswhile on an intercom call To receive an external call While on an intercom call : • You hear the call waiting tone in the earpiece. The base station rin...

29 Operating with additional basestations It is possible to build your Synergy 900 into a much larger phone system with the addition of up to 3 extra base stations. You can use up to six handsets on each Synergy900 base station, and up to four base stationswith your handset to build up a comprehensi...

31 When connecting your Synergy 900 to aswitchboard/PBX, you may need to change thedialling mode setting from Time Break Recall( TB ) to Ear th Recall ( E ). To switch between Time Break Recall and Earth Recall The original setting is Time Break Recall. • Press the ➔ button until the display shows S...

Maintenance General Simply clean the Synergy 900 and any additionalhandsets and chargers with a damp cloth (notwet) or an antistatic wipe. Never use a dr y cloth as this may cause a static shock. Service Within guarantee If you experience a problem with your Synergy900 or handset, you should contact...

33 Help Emergency Calls The emergency services can be contacted in theUK by dialling 999 or 112 which is valid in any country that is a member of the Europeancommunity. If your Synergy 900 is connected to aswitchboard/PBX, you may have to dial an accessnumber before 999 to contact the emergency serv...

35 Technical information Environment Your Synergy 900 should be kept free of dust,moisture, high temperature, vibration and should notbe exposed to direct sunlight. Do not stand it oncarpets or other sur faces which generate fibres orplace it in locations which prevent the free flow of airover its s...

Technical specif ication Standard DECT/GAP Number of channels 120 duplex channels Radio frequency range 1880 MHz to 1900 MHz Duplex method Time-division multiplexing. 10 ms frame length Channel spacing 1728 kHz Bit rate 1152 kbit/s Modulation GFSK Voice coding 32 kbit/s Transmitted power 10 mW, aver...

37 Index Intercom calls 26 calls on hold 28 making and receiving 26 switching between calls 27 transfer a call 28 Keypad guard 17 beeps 15 on 18 of f 18 Making calls 9 Maintenance 32 Melody handset 13 Melody base station 14 Paging the handset 10 PIN code 19 Resetting base station 15 Plan location of...