BT 2011 - Manuals

1 Connect the power cable Plug the power cable into the powersocket on the underside of yourDiverse 2011. The power cableconnector is coloured red. Please takecare that the telephone cord and powercable plugs are connected to thecorrect socket as incorrect placementcould damage the base station. 5 W...

6 3 Connect the telephone linecord to the Diverse 2011base station Ensure that this is fitted cor rectlyinto the right socket. 4 Plug your Diverse 2011into the phone socket If you do not have a modern phonesocket, call Freefone 0800 800 150 and ask for a BT engineer to comeand fit the cor rect socke...

7 Charge the handsetbatteries for at least 16 hours Place the handset on the base. The handset can be charged face upor down. Make sure that the contacts on thebottom end of the handset aretouching both charging contacts. When the handset batteries arecharging, the green CHARGING light comes on – it...

Using the Diverse 2011 Your Diverse 2011 of fers a menudriven display. You enter menu listsby pressing the MENU button. The OPTION buttons below the screen allow you to select options withineach menu and make adjustments totheir settings. The options shown on the display areindicated by symbols as f...

Secrecy You can use the Diverse 2011 toplace your caller on hold so that theycannot hear you talking. To obtain secrecy on an external call • Press INT . Display shows your handset’s internal number andyou hear the internal dial tone.This allows you to talk tosomeone in the same room,without your ca...

To find a handset’s extension number • Press the INT button. • The handset’s extension number isdisplayed ie. INTERN 3 . To page a handset from the base station To locate handsets that are awayfrom the base station. • Press the PAGING button on the base. All handsets registered withthe base will rin...

12 I N T To transfer an external call between handsets You are in conversation with anoutside caller and want to transfer thecall to another handset. • Press the INT option button. • Dial the extension number youwant. • When the call in answered, pressthe END CALL button, or replace your handset on ...

13 Entering names and numbers There are three lines in yourdisplay for entering information.1st line for the name (maximum 16 characters) 2nd and 3rd linesfor the number (maximum 32characters) Upper and lower case • Press the * button to switch from lower to upper case for one character. Controlling...

15 Insert a function/pause Using INSERT FUNCTION allows you to inser t a pause. This is generallyrequired when your Diverse basestation is connected to aswitchboard/PBX. Show Function Displays an explanation of any specialcharacter used in a stored number orshor t cut code (see Shor t Cuts , page 16...

16 Call barring You can set your Diverse 2011 so thatno outgoing calls can be made except 999 , 112 and 9112 calls and any special ‘emergency numbers’ storedin the base station memor y. See yourbase station user guide for details. Your handset PIN number acts as asecurity measure when locking theDiv...

17 Pre-set short cut menu These shor t cuts must be stored inthe memor y before you can usethem. See below. To store the pre-set short cuts • Press the MENU button. • Use the UP or DOWN options to highlight SHORT CUT . • Press OK . If previous shor t cuts have been created, they aredisplayed, other ...

18 Adding shor t cut functions • Press the MORE OPTIONS button. • Use the UP or DOWN option to highlight INSERT FUNCTION . • Press OK to display a list of functions. • Use the UP or DOWN option to highlight the function you want. • Press OK . The screen displays the character representing the functi...

19 Check or Request number (N) The shor t cut is inter r upted and you can enter a number of your choice.When you have confirmed the numberpress the OK button the shor t cut continues processing. Request acknowledgement (Q) The shor t cut is inter r upted to allow you to hear the dial tone, for exam...

22 Handset settings The handset setting menu allows thefollowing settings to be changed. Beeps You can switch advisor y and warning beeps on or of f. Switchingthem of f will save batter y energy butmay deprive you of information youmay need while using your phone. • Button beep Each time you press a...

23 To switch Auto Backlight or Auto Talk on and off • Press the MENU button. • Press the DOWN button to highlight SETTINGS . • Press the OK button. • Press the DOWN button to highlight HANDSET SETTINGS . • Press the OK button. • Press the DOWN button to highlight AUTO BACKLIGHT or AUTO TALK . • Pres...

Additional features Caller Display Caller Display lets you know who’scalling without lifting the handset. With BT’s Caller Display ser vice,your Diverse base station receivescaller information which istransmitted over the BT network. This includes the date and time thecall is received, and in most c...

Handset power must be switched to ON and you must be in range of thebase station. • Press the INT button. • Press the SET button • Press the # button. • Press 8 on the keypad. • Press the ✱ button. • Enter the cur rent system code (default = 0000 ). • Enter the 4-digit code you want.• Confirm the co...

26 • Press the OK button. • Enter the new PIN. • Press the OK button. • Repeat the new PIN. • Press the OK button to confirm. You can cor rect any mistakes whenentering the PIN by using the LEFT/RIGHT and CLEAR CHARACTER buttons. Call allocation If you have registered additionalhandsets with your Di...

To add and remove handsets that respond to group ringing The default setting is for all registeredhandsets to be set to group ringing. • Press the INT button. • Press the SET button • Press the # button. • Press the 1 button. • Enter the system code (default = 0000 ). • Press the REDIAL button. • Pr...

31 • Enter the base station code (default = 0000 ). • Press the OK button. There is a shor t wait until the available basestation numbers are displayed. • Enter one of the free internal extension numbers displayed onyour screen. • Press the OK button to confirm. To set the Diverse 2011 to select the...

Setting the access pause You can inser t a pause or change the length of a pause to suit dif ferentaccess codes. The handset must be switched ON. • Press the INT button. • Press the SET button • Press # . • Press the 1 button • Enter the system code (default = 0000 ). Each digit you enter erases one...

35 Maintenance General Simply clean the Diverse 2011 andbase station with a damp cloth or anantistatic wipe. Never use a dr y clothas this may cause a static shock. Service Within the warranty period If you experience a problem withyour Diverse 2011 you shouldcontact the Diverse Helpline on 0845 790...

38 Connecting to switchboards The Diverse 2011 is only approvedfor use with a base which iscompatible with switchboards,including those which do not providesecondar y proceed indication. If you would like a list of suitableswitchboards, contact BT on 0800 800 154 . If you do have a compatible switch...

39 Index Access code 34 Access pause 34 At a glance 1 Additional features 24 Base selection 31 Base signal 31, 32 Base station Base station name 32 Ringer tone 22 Ringer volume 22 Batteries approved type 5 charging 7 installing 6 low warning 8 per formance 7, 35 replacing 36 Belt clip 6 Building up ...

40 Notes Maintenance 35 Making and receiving calls 10 Memor y available 15, 21 On/Of f 9 Paging 11 Pause 34 PIN (Personal Identification Number) 23, 25 Range 37 Redial 10 delete a redial number 11 Redial memor y 15 copy a redial number 15 Registering with more than one base station 1010, 1015, 2010,...

Off ices in Europe, Nor th America,Japan and Asia Pacif ic . The Telecommunications ser vices described in this publication are subject to availability and may be modified from time to time.Ser vices and equipment are provided subject to British Telecommunications plc’s respective standard condition...