Page 2 - Table of Contents
2 Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 3 - Safety Information
3 Safety Information WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling, installing and operating the dispenser. WARNING: This product dispenses water at very high temperatures. Failure to use properly can cause personal injury. When operating th...
Page 5 - Installation; Install the Drip Tray and Grid
5 Indicator Panel Description 1 . Power indicator/self-cleaning light – When illuminated, indicates that the dispenser is on. When blinking, indicates that the self-cleaning feature is operating. 2 . Hot water indicator light – When illuminated, indicates that the dispenser is heating water. 3 . Col...
Page 6 - Connect a Water Bottle
6 2 . Connect a Water Bottle IMPORTANT: To prevent dry heating, do not turn on the heating and cooling switches until you complete the steps in this procedure. A . Remove the plastic wrapping and cap from the water bottle. Then clean the new bottle with a cloth. B . Open the cabinet door and feed th...
Page 7 - Operation; Turn the Dispenser On/Off
7 Operation IMPORTANT: This unit has been tested and sanitized prior to packing and shipping. During transit, dust and odors can accumulate in the tank and lines. Dispense and dispose at least one quart of water prior to drinking any water. Turn the Dispenser On/Off IMPORTANT: Before you turn the di...
Page 8 - Troubleshooting
8 Troubleshooting Problem Solution The cold water is not cold. • It takes up to one hour after setup to dispense cold water. • Make sure the power cord is properly connected to a working outlet. • Make sure the back of the dispenser is at least 20 cm from a wall and there is free airflow on all 20 c...
Page 9 - Cleaning and Maintenance; Use the Self-Cleaning Ozone Feature
9 Cleaning and Maintenance Use the Self-Cleaning Ozone Feature It is highly recommended that you use the self-cleaning feature on a weekly basis to sanitize tanks and water lines. To activate the self-cleaning cycle, press in the self-cleaning switch (9), hold for 5 seconds, and release. The power i...
Page 10 - Clean the Reservoirs
10 Clean the Reservoirs The reservoirs should be cleaned every 3 to 4 months to remove mineral buildup and optimize dispenser performance. Gather the following supplies: • 200g (approx. 1.5 cups) citric acid crystals • Hot water • Large bucket or empty 5-gallon bottle • Container or cup • Clean dry ...
Page 11 - Warranty
11 Warranty Brio (“Vendor”) warrants to the original purchaser of the Brio Water Coolers (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, al...
Page 12 - Contact Us
©2023 Brio Water Technology, Inc. Contact Us Call: +1 844-257-4103