Bradley SS-2/IR/STD - Manuals

Bradley SS-2/IR/STD – Manual in PDF format online.

Manuals:

Manual

Manual Bradley SS-2/IR/STD

Summary

Page 2 - Bradley Corporation •; Pre-Installation Information; Barrier-free and ADA compliant - standard height mounting

2 Express® Lavatory System SS-SeriesSS-2/IR/STD, SS-2/IR/JUV Installation Instructions - For Service Only 5/11/04 Bradley Corporation • 215-1243 Rev. D; EN 03-813 Pre-Installation Information Barrier-free and ADA compliant - standard height mounting The SS-2/IR/STD Express® Lavatory System must have...

Page 3 - Express® Lavatory System SS-Series; Standard Height Mounting

3 Express® Lavatory System SS-Series Installation Instructions - For Service Only SS-2/IR/STD, SS-2/IR/JUV Bradley Corporation • 215-1243 Rev. D; EN 03-813 5/11/04 8" (203) 22" (559) 34" (864 6" (152) 50" (1270) 8-1/2" (216) 21" (533) 10" (254) Radius 8" (203) Rad...

Page 4 - Standard Height

4 Express® Lavatory System SS-SeriesSS-2/IR/STD, SS-2/IR/JUV Installation Instructions - For Service Only 5/11/04 Bradley Corporation • 215-1243 Rev. D; EN 03-813 38" (965) 34" (864) 29" (737) 11" (279) 9" (229) 6" (152) 4" (102) 30" (762) 25" (635) 11" (279) ...

Page 5 - lines will cause the valves to malfunction.; Figure 1a; Installation Instructions

5 Express® Lavatory System SS-Series Installation Instructions - For Service Only SS-2/IR/STD, SS-2/IR/JUV Bradley Corporation • 215-1243 Rev. D; EN 03-813 5/11/04 Installation Instructions Step 1: Rough in Note: See Figure 1a below (for Standard Height) and Figure 1b on page 6 (for Juvenile Height)...

Page 6 - Figure 1b

6 Express® Lavatory System SS-SeriesSS-2/IR/STD, SS-2/IR/JUV Installation Instructions - For Service Only 5/11/04 Bradley Corporation • 215-1243 Rev. D; EN 03-813 (MM) 28" (711) 24-5/8" (625) 21" (533) 11-3/8" (289) 15-5/8" (397) (6) 3/8" WALL ANCHORSWITH MINIMUM PULL-OUT RAT...

Page 7 - installer) at the locations shown in Figures 1a or 1b on pages 5-6.; Figure 2

7 Express® Lavatory System SS-Series Installation Instructions - For Service Only SS-2/IR/STD, SS-2/IR/JUV Bradley Corporation • 215-1243 Rev. D; EN 03-813 5/11/04 Installation Instructions continued . . . Step 1: Rough in continued . . . IMPORTANT: Turn OFF electrical power to the outlet when insta...

Page 8 - Step 2: Mounting frame to wall; Note: Scuff panel does not need to be removed.; IMPORTANT: Anchoring the frame to a wall that is; behind the frame to ensure that it will not bend when anchored.; Figure 4; Figure 3

8 Express® Lavatory System SS-SeriesSS-2/IR/STD, SS-2/IR/JUV Installation Instructions - For Service Only 5/11/04 Bradley Corporation • 215-1243 Rev. D; EN 03-813 Installation Instructions continued . . . Step 2: Mounting frame to wall 1. Remove the eight Torx-head screws securing the panel to the f...

Page 9 - Step 3: Installing bowl assembly; Note: Refer to Figure 5 below when installing the bowl assembly.; Figure 5

9 Express® Lavatory System SS-Series Installation Instructions - For Service Only SS-2/IR/STD, SS-2/IR/JUV Bradley Corporation • 215-1243 Rev. D; EN 03-813 5/11/04 Installation Instructions continue . . . Installation Instructions continued . . . Step 3: Installing bowl assembly IMPORTANT: Moving an...

Page 10 - Step 4: Connecting supply and drain; drain pipe stubbed out of the wall.; Figure 7

10 Express® Lavatory System SS-SeriesSS-2/IR/STD, SS-2/IR/JUV Installation Instructions - For Service Only 5/11/04 Bradley Corporation • 215-1243 Rev. D; EN 03-813 Installation Instructions continued . . . Step 4: Connecting supply and drain 1. FOR HOT AND COLD SUPPLY: Connect the flexible hoses ins...

Page 11 - Step 5: Connecting electrical and supply tubing; Turn on the water supply to the Express® and check for leaks.; Figure 8

11 Express® Lavatory System SS-Series Installation Instructions - For Service Only SS-2/IR/STD, SS-2/IR/JUV Bradley Corporation • 215-1243 Rev. D; EN 03-813 5/11/04 Installation Instructions continued . . . Step 5: Connecting electrical and supply tubing WARNING: The Express® must be connected to th...

Page 12 - Cleaning and Maintenance Instructions; Terreon® and panel maintenance; Wipe the surface with a damp cloth and wipe dry.; Panel cleaning; If vandals create markings on the panel, Bradley recommends using

12 Express® Lavatory System SS-SeriesSS-2/IR/STD, SS-2/IR/JUV Installation Instructions - For Service Only 5/11/04 Bradley Corporation • 215-1243 Rev. D; EN 03-813 Cleaning and Maintenance Instructions IMPORTANT: Strong alkaline or acid-based chemicals and cleansers should not beused to clean Terreo...

Page 13 - Soap Dispenser Maintenance; Step 1: Fill soap dispensers; Figure 9a

13 Express® Lavatory System SS-Series Installation Instructions - For Service Only SS-2/IR/STD, SS-2/IR/JUV Bradley Corporation • 215-1243 Rev. D; EN 03-813 5/11/04 Soap Dispenser Maintenance Step 1: Fill soap dispensers The two soap valves will dispense vegetable/coconut oil liquid soaps, synthetic...

Page 14 - Step 2: Change soap type; Pour out all of the soap from the dispenser.; Step 3: Cleaning Instructions; cleaners can mar the surface.; Pour out any remaining soap in the tank.; Clean internal components:; To clean the internal components of the soap dispenser, pump

14 Express® Lavatory System SS-SeriesSS-2/IR/STD, SS-2/IR/JUV Installation Instructions - For Service Only 5/11/04 Bradley Corporation • 215-1243 Rev. D; EN 03-813 Soap Dispenser Maintenance continued . . . Step 2: Change soap type 1. Pour out all of the soap from the dispenser. 2. Rinse the soap di...

Page 15 - Assembly of Components; Paneling; VernathermTM Thermostatic Mixing Valve

15 Express® Lavatory System SS-Series Installation Instructions - For Service Only SS-2/IR/STD, SS-2/IR/JUV Bradley Corporation • 215-1243 Rev. D; EN 03-813 5/11/04 SPRAYHEAD COVER/SHELF (part number varies with color ofunit—contact your local Bradleyrepresentative for assistance) ACCESS PANEL Stand...

Page 16 - Other Replacement Parts; Sensor assembly and solenoid valve; To access solenoids and sensors:; Remove the eight Phillips-head screws located in the bottom of

16 Express® Lavatory System SS-SeriesSS-2/IR/STD, SS-2/IR/JUV Installation Instructions - For Service Only 5/11/04 Bradley Corporation • 215-1243 Rev. D; EN 03-813 Other Replacement Parts Assembly of Components continued . . . Sensor assembly and solenoid valve To access solenoids and sensors: Remov...

Page 17 - Check Valve Troubleshooting; If water just dribbles or does not flow from sprayhead:; Inspect the stop/check valves for proper installation.; If water sprayhead delivers all hot or cold water:; • A red marking indicates the hot inlet.; Solenoid Valve Troubleshooting; An individual operating station fails to shut off and drips.; Reconnect the wiring per diagram on page 14.; An individual operating station fails to turn on.; the problem valve and reconnect to the adjacent valve.

17 Express® Lavatory System SS-Series Installation Instructions - For Service Only SS-2/IR/STD, SS-2/IR/JUV Bradley Corporation • 215-1243 Rev. D; EN 03-813 5/11/04 Check Valve Troubleshooting If water just dribbles or does not flow from sprayhead: 1. Close the stops and check the valves that supply...

Page 19 - THEN; VernathermTM Mixing Valve Maintenance and Service; Maintenance Instructions; Disassemble the VernathermTM Valve as shown,; Service Suggestions; NOTE: A red marking indicates the hot side of the valve.; IF

19 Express® Lavatory System SS-Series Installation Instructions - For Service Only SS-2/IR/STD, SS-2/IR/JUV Bradley Corporation • 215-1243 Rev. D; EN 03-813 5/11/04 THEN Valve Position is Hot Supply Cold Supply Valve Delivers Correct Hot Cold Mixed 107° Correct Hot No Water Valve shuts off or drips ...