BISSELL 2066F - Manuals

Assembly In step 3, you will need to use a Phillips screwdriver. 2 3 4 1 Next, align the carry handle with the slots on either side of the base (behind the power switch and cleaning mode switch). The carry handle will “click” into place. Important: Do NOT put the clean tank on the machine until step...

WASH & PROTECT WASH & REMOVE WASH & REFRESH Professional Stain & Odour Pet Stain & Odour Stain & Odour Allergen Removal Ambipur™ Blossom & Breeze Natural Orange Professional strength to remove extra tough stains and odours Includes Scotchgard™ Protector Removes tough pet ...

Customize Your Clean & Maximize Your Results Pretreat Pesky Stains Choose Your Formula BOOST Your Deep Clean Pretreat stains for improved deep cleaning performance. Stains may include but are not limited to: ›› coffee ›› dirt ›› oil ›› cosmetic makeup ›› pet messes Prepare your deep cleaner usin...

Unscrew the cap from the clean water tank. Add hand hot tap water to the water fill line. Next, reference the chart below for formula amounts to add to the tank. Twist cap back into place. 4 3 1 Lift the clean water tank straight up to remove from the machine. The clean water tank is at the top of t...

NOTE: Fill with hand hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute BISSELL 2X Formula cleaning solution with other household cleaning products. FORMULA FILLING INSTRUCTIONS DEEP CLEAN MODE ...

Cleaning Your Carpet 1 Press the power button to turn the machine on. To recline your machine for use, press the recline pedal with your foot. Plug into a properly earthed outlet. Select cleaning mode: Deep Clean Delivers a deep clean to your carpet. Express Clean Provides a lighter clean with about...

www.BISSELL.com 11 Important! Please check manufacturer’s tag before cleaning area rugs for any specialised cleaning instructions. Not for use on silk or delicate area rugs. Cleaning Area Rugs Select Express Clean Mode. Test in a small inconspicuous area first for colorfastness. Important: Keep the ...

Cleaning with the Bare Floor Tool 2 1 Turn off and unplug your machine. Attach the bare floor tool to the foot’s bottom by lining the tool to the edge of the nozzle. Rotate down until it clicks into place. Follow filling instructions on page 8 using the Wash & Shine Hard Floor Cleaner formula an...

www.BISSELL.com 13 Cleaning with Hose and Tool 2 1 Insert the hose and snap into place. Be sure the coloured hose release clip is facing out, away from machine. Important: Prime the hose by holding at ground level and pressing the spray trigger until solution starts to dispense out of the spray tip....

Clean the red filter below the dirty tank by wiping off any remaining dirt or debris. Quick Empty: Pull the rubber tab (located at the corner of the top of the tank) and tilt to pour. When closing the rubber tab, make sure all edges are sealed tight. Final Rinse & Clean: Unscrew ring at bottom o...

www.BISSELL.com 15 1 Maintenance: Cleaning Machine After Use First, fill the clean water tank with warm tap water and then empty it all to rinse. Then fill again with warm tap water and return the tank to the machine. Twist cap back on tightly. To flush and rinse machine: Turn the machine on and pre...

Maintenance: Cleaning the Nozzle 2 1 3 4 If pet hair or debris become clogged in the nozzle, it can be cleaned out of the nozzle with the nozzle clean out tool.Turn off and unplug the machine from the earthed outlet. Remove the nozzle from the foot by flipping the accessory hose door open, then lift...

Maintenance: Replacing Small Belt, Large Belt, or Brush Rolls 2 3 1 4 What you will need: 1 Phillips screwdriver & 1 flathead screwdriver Here you should see one (1) belt. This is the Flat Pump Belt. If the Flat Pump Belt is broken, gently remove it from the machine. We will replace this belt in...

Problem Possible causes Remedies Reduced spray OR no spray Clean water tank may be empty Refill tank Clean water tank may not be seated completely Turn power OFF. Remove and reseat tank Pump may have lost prime in hose cleaning mode Hold end of hose below water level in tank to prime Loss of suction...

20 ©2016 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 160-8312 Rev 03/16 RevC Visit our website at: www.BISSELL.com Scotchgard™ is a trademark of 3M Febreze & Ambipur are trademarks of The Procter & Gamble Company, Cincinatti, Ohio used under...