Best IP29M Series - Manuals

Page 3 - HOOD; INTERIOR BLOWERS

HL0091 - 3 - Model 415 (7” round adjustable elbow) Model 427 (4 1 / 2 ” x 18 1 / 2 ” to 10” Round, 6” high - lateral Model 423 (4 1 / 2 ” x 18 1 / 2 ” to 10” Round - vertical Model 424 (4 1 / 2 ” x 18 1 / 2 ” to 10” Round - horiz. front/rear Model 454 (4 1 / 2 ” x 18 1 / 2 ” to 10” Round - horiz. /r...

Page 5 - SELECT BLOWER OPTION AND INSTALLATION TYPE

- 5 - 1. SELECT BLOWER OPTION AND INSTALLATION TYPE E ither an interior or an exterior blower or in-line blower may be used with this hood. The Best by Broan IP29M Series must be installed with blower models P6, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only. Other blowers cannot be subst...

Page 6 - PREPARE THE INSTALLATION; MINIMUM AND MAXIMUM DISTANCE; CAUTION

Remove the installation kit from inside the hood. Make sure that the following items are included: - Installation manual - Accessories including: • 3 Evolutionary™ hybrid baffle filters• Shielded halogen lights (GU10 type base, 120 V, 50 W) (6 for 42” width hoods, 8 for 54” width hoods)• Bag of part...

Page 8 - BUILD THE FRAMEWORK; AEIWP S

- 8 - In the ceiling material, cut-out a 28¾” x 12½” max.opening over the installation location. Install two supporting studs inside the cut-out at dimensionsshown beside. 7. BUILD THE FRAMEWORK 7.1 S UGGESTED F RAMEWORK FOR I NSTALLATION WITH D ECORATIVE F LUE C OVER AEIWP S ERIES 7.2 S UGGESTED F ...

Page 9 - ATDIP S; INSTALL THE ROUGH-IN PLATE IN THE BLOWER HOUSING; SECURE BLOWER HOUSING TO BRACKETS

- 9 - HD0231 I NSTALLATION WITH DRY WALL TRIM ATDIP S ERIES 8. INSTALL BLOWER HOUSING Use both screws ( A ) previously removed in step 4 to assemble the blower housing to the mounting brackets. For installation with decorative flue cover AEIWP Series only, place 4 nuts ( B ) (from flue cover parts b...

Page 10 - MOUNT THE DECORATIVE FLUE COVER OR THE DRY WALL TRIM ON THE HOOD; WARNING; CONNECT THE WIRING; WARNING

- 10 - 15.INSTALL THE HOOD 15.1 I NSTALLATION WITH DECORATIVE FLUE COVER AEIWP S ERIES Assemble the hood assembly to the mounting brackets by aligning keyholes with 4 nuts previously installed in step 8.1 (2 nuts per side). While holding the hood, remove one nut and install a washer (included in par...

Page 11 - REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS; INSTALL THE BLOWER; Do not plug the two cords into each other.

17.REINSTALL THE PAN Using a Phillips no. 2 or Robertson no. 2 screwdriver and the retaining screws, reinstall the pan(previously removed in step 6) inside the hood (shaded part on illustration beside). HD0224 R ETAINING SCREWS LOCATION Reinstall grease drip rail(s) ( 1 ). The illustration beside sh...

Page 12 - LIGHT BULBS REPLACEMENT

- 12 - 20.USE AND CARE Evolutionary™ Hybrid Baffle Filters The Evolutionary™ hybrid baffle filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your cookingstyle generates greater grease—like frying foods or wok cooking.Remove Evolutionary™ hybrid baffle filters by...

Page 14 - Grease filter reset; Grease filter maintenance indicator; Interface backlighting; HEAT SENTRY; INSTEONTM Network compatibility

- 14 - Grease filter reset • Once the grease filter cleaning is done, press on the grease filter reset push-button (item 4 on control illustration) to reset the filter maintenance timer. This will also shut off the grease filter maintenance icon (item 5 on control illustration). Grease filter mainte...

Page 15 - SERVICE PARTS

- 15 - SERVICE PARTS KEY PART QTY (HOOD WIDTH) NO. NUMBER DESCRIPTION 42’’ 54’’ 1 V08069 C ONTROL P ROCESSOR U NIT 1 1 2 V08073 P ARTICULATES S ENSOR 1 1 3 V13924 M ALE C ONNECTOR 1 1 4 V13923 F EMALE C ONNECTOR 1 1 5 V08074 C ONTROL I NTERFACE 1 1 6 V16569 L AMP S HELL , S OCKET AND T RIM A SS ’ Y ...

Page 16 - WARRANTY; ONE-YEAR LIMITED WARRANTY

- 16 - WARRANTY WARRANTY ONE-YEAR LIMITED WARRANTY Broan-NuTone LLC (“Broan-NuTone”) warrants to the original consumer purchaser of its products that such products will befree from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NOOTHER WARR...