Page 4 - Product Detail; System Requirements
Product Detail 2 • PC with one free USB port • Windows ® 98/98 Second Edition (SE) • CD-ROM drive System Requirements
Page 5 - Hardware Installation
Hardware Installation 3 Because USB is hot swappable, you need not power down your PC. • Connect the jack of the power adapter and plug it into the back of the Multi-port Hub • Find an unused electrical outlet, and plug in the power adapter • Plug the flat end (A plug) of the USB cable into a free U...
Page 6 - Software Installation
Software Installation 4 Software Installation – Windows ® 98 and Windows ® 98 Second Edition (SE) First, Windows ® will automatically detect and install the built-in "General Purpose USB Hub" for the four downstream USBports. You do not need to do anything. Next, Windows ® will detect the tw...
Page 19 - Installing a Parallel Printer
Installing a Parallel Printer 17 Windows ® will read the CD-ROM and find the correct drivers. Click on Finish: Windows ® will display the following prompt. Click OK:
Page 24 - Adding Optional DOS Box Support
Adding Optional DOS Box Support 22 Adding Optional DOS Box Support for Serial Ports DOS Box support for the USB Serial Adapter is useful if youintend to use DOS applications, but not necessary for Windows ® applications. If you are using only Windows ® applications, it is recommended that you do not...
Page 27 - Using USB with DOS Applications
Using USB with DOS Applications 25 Using the USB Serial Adapter With DOS Applications To enable the USB Serial Adapter to work with DOSapplications, follow the instructions in Adding DOS Box Support.You can choose a different name for DOS than what is used forWindows ® . You may need to do this if t...
Page 28 - Troubleshooting
Troubleshooting 26 Port unavailable If the installation of the USB Serial Adapter has been completedbut the port is unavailable to applications, follow theinstructions below to diagnose the problem: 1. Check the LEDs on the USB Serial Adapter. • If the red light is on steady, skip to the next sectio...
Page 30 - Information; FCC Statement; CE Declaration of Conformity
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220,declare under our sole responsibility that the product: F5U116 to which this declaration relates:Complies with Part 15 of the FCC Ru...