Page 2 - tablE oF contEnts; Getting to Know Your Router; Updating Your Router via Your System Tray (Windows) or Menu Bar
tablE oF contEnts getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 3 - Where to Place Your Router; gEtting startED
3 What’s in the box Play N750 DB Wireless Dual-Band N+ Router Ethernet cable (attached to router) Power supply (attached to router) Network information card (attached to router) Belkin Setup CD with User Manual initial setup Where to Place Your Router For the best results, place the Router next to y...
Page 4 - modem; how to set it Up
Page 5 - . Connect your Router’s Ethernet cable to your modem’s Ethernet; Setup
5 gEtting startED 1 . Connect your Router’s Ethernet cable to your modem’s Ethernet port (on the back of your modem) . This port might be labeled differently on your particular modem . If you are adding a Router for the first time, this port may be connected to your computer by an Ethernet cable . I...
Page 6 - . After a brief installation, the setup software will ask you; for the network name and password from the network
6 gEtting startED 5 . After a brief installation, the setup software will ask you for the network name and password from the network information card that is attached to your Router . Store the card under the base of your Router for future reference .
Page 7 - . A progress screen will appear while additional software is
7 gEtting startED 6 . A progress screen will appear while additional software is installed . This may take a few minutes to complete . Once finished, a “Success” message will appear indicating that you are connected to the Internet via your new Belkin Router . During setup you may be asked for addit...
Page 8 - network name & security – Personalize your network name
8 gEtting startED advanced tools & settings After the initial setup is complete, you have the option to change settings like your network name, security type, and password . To make these changes and others, click on the Advanced Tools icon at the CD Setup menu and select one of the following se...
Page 9 - blue: You are connected to your Belkin Router
9 gEtting startED the belkin router Manager The Belkin Router Manager appears in your system tray (Windows) or menu bar (Mac) . Its icon indicates the current status of your Router and also allows you to access your Router’s settings to make changes . It also provides quick access to software that c...
Page 10 - Manual setup Using Your Browser
10 gEtting startED In your browser, type “http://router” (you do not need to type in anything else such as “www”) . Then press the Enter key . If you’re still having trouble running the manual setup option, type “192 .168 .2 .1” in your browser (you do not need to type in anything else such as “http...
Page 11 - Using the cD
11 gEtting startED Adding Computers to Your Network Wireless devices such as computers, network printers, and gaming systems can connect to your Router with a few simple steps . Using the cD 1 . Put the Setup CD into your computer . If the CD doesn’t open automatically, browse to your CD drive and o...
Page 12 - Manually
12 gEtting startED Manually If you choose not to use the included Setup CD for adding additional computers or wireless devices, you can manually add these items to your network . 1 . Locate the wireless-network-connections option on your computer or wireless device . 2 . Select your Belkin Router fr...
Page 14 - adding a Drive
14 gEtting startED adding a Drive You can share a USB hard drive or flash drive to your network via your Router’s USB port . Once connected, you can share files and music with other computers and devices within your network . Plug your USB hard drive into the USB port on the back of your Router . Wh...
Page 15 - adding other Usb Devices
15 gEtting startED adding other Usb Devices Other USB devices may also be shared via your Router . Plug your device into the USB port located on the back of your Router . When the light above the USB port is lit, your device is available to computers on your network . Computers running the Belkin US...
Page 16 - Usb print and storage Manager
16 gEtting startED bundled software Usb print and storage Manager The USB Print and Storage Manager helps to manage and monitor the use of your USB printers, scanners, hard drives, and other devices that are connected to your Router’s USB port and shared across your network . USB Print and Storage M...
Page 17 - guest access
17 gEtting startED additional capabilities guest access You can allow guests to use your Internet connection without joining your personal network . The network name and password for the guest network is located on the network information card found under the foot of your Router . A person using you...
Page 19 - GETTING TO KNOW YOUR ROUTER; off: No USB device is; back panel
19 GETTING TO KNOW YOUR ROUTER a) Modem (Wan) connector Connect your modem to this port using an Ethernet cable . b) Wired (lan) connectors Connect computers and other wired network devices to these ports using Ethernet cables . c) Usb ports USB printers, disks, and other USB devices plugged into th...
Page 21 - setup software
21 tEchnical DEtails system requirements Router Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection At least one computer with an installed network interface adapter TCP/IP networking protocol installed on each computer RJ45 Ethernet networking cable Internet b...
Page 22 - note: We recommend you use a computer that
22 UsING YOUR ROUTER Enabling Auto Update on Your Belkin Router The Router has the capability to automatically check for a newer version of firmware and alert you when it’s available . You can choose to download the new version or ignore it . By default this feature is disabled . If you want to enab...
Page 23 - UsING YOUR ROUTER; Select “Enable” by clicking the radio; . Click on “System Settings” in the left-hand; column under the “Utilities” heading .; . Toward the lower-half side of the screen you will; find “Auto Update Firmware Enabling” .
23 UsING YOUR ROUTER 23 6 . Select “Enable” by clicking the radio button and then click “Apply Changes” at the bottom of the screen . ! 4 . Click on “System Settings” in the left-hand column under the “Utilities” heading . 5 . Toward the lower-half side of the screen you will find “Auto Update Firmw...
Page 24 - Once you have completed the setup process, you will need; . Click on the blue Belkin Router Manager icon (right-click for
24 UsING YOUR ROUTER 24 Updating Your Router via Your system tray (Windows) or Menu bar (Mac) Once you have completed the setup process, you will need to update the new software for your Router . This can be done easily via your computer’s system tray or menu bar . setup steps: 1 . Click on the blue...
Page 25 - . Locate and download the firmware file from the Belkin
25 UsING YOUR ROUTER 25 Updating the router’s Firmware via the Web interface The following steps show you how to update your Router’s firmware using its web interface . You do not need to be connected to the Internet as this interface is built into the Router itself . setup steps: 1 . Locate and dow...
Page 26 - . Open a web browser on the computer .; Router does not ship with a password, so just click “Submit ” .; . Click on “Firmware Update” toward the
26 UsING YOUR ROUTER 26 4 . Open a web browser on the computer . 5 . In the address bar of the web browser, type “http://192 .168 .2 .1” and press “Enter” on your keyboard . 6 . Click “Login” in the upper right-hand corner of the page . The Router does not ship with a password, so just click “Submit...
Page 27 - . Click the “Browse” button toward the middle of the; screen to search for the file you saved previously .; note: The firmware version in the images below is; depicted as an example . Your file name will var y; . Select the firmware file by left-clicking on it and then click; the “Open” button in the lower-right corner of the window .
27 UsING YOUR ROUTER 27 8 . Click the “Browse” button toward the middle of the screen to search for the file you saved previously . note: The firmware version in the images below is depicted as an example . Your file name will var y depending on your model and version . 9 . Select the firmware file ...
Page 29 - reset button – red; Restoring Your Router to Factory Defaults
29 UsING YOUR ROUTER resetting the router reset button – red The “Reset ” button is used in rare cases when the Router may function improperly . Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings . You can also restore the factor y default setti...
Page 30 - symptoms; You need to restore the factor y defaults using the web interface .; setup steps
30 UsING YOUR ROUTER restoring the router to Default settings Using the Web interface symptoms You need to restore the factor y defaults using the web interface . This may be because the Router is not performing as expected or you wish to remove all previously configured settings . setup steps 1 . O...
Page 31 - . Click on “Restore Factor y Defaults” in the left-; hand column under the “Utilities” heading .; . Click on the “Restore Defaults” button .
31 UsING YOUR ROUTER 4 . Click on “Restore Factor y Defaults” in the left- hand column under the “Utilities” heading . 5 . Click on the “Restore Defaults” button . !
Page 32 - . A warning box will open that says, “ Warning: All your settings; will be lost . Are you sure you want to do this?” Click “OK” .; . The Router will begin the restoring process . Once; the restore is complete, the Router will reboot .
32 UsING YOUR ROUTER 6 . A warning box will open that says, “ Warning: All your settings will be lost . Are you sure you want to do this?” Click “OK” . 7 . The Router will begin the restoring process . Once the restore is complete, the Router will reboot . note: This may take several minutes . Your ...
Page 33 - troubleshooting
33 TROUBLEshOOTING, sUPPORT, AND WARRANTY troubleshooting the setup cD does not automatically start . If Belkin Setup does not run when you insert the CD-ROM, your computer may not be configured to open CDs automatically . If Belkin Setup does not appear within 15 seconds, browse to your CD-ROM driv...
Page 37 - i’ve installed this new router and some of my network clients
37 TROUBLEshOOTING, sUPPORT, AND WARRANTY i’ve installed this new router and some of my network clients (computers, game consoles, etc .) are now unable to connect . Your new Router came pre-configured with a network name and password, found printed on an attached card . All clients must use this ne...
Page 43 - -Year Product Warranty; What this warranty covers .
43 TROUBLEshOOTING, sUPPORT, AND WARRANTY belkin international, inc ., limited 2-Year Product Warranty What this warranty covers . Belkin International, Inc . (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material,...
Page 45 - how state law relates to the warranty .
45 TROUBLEshOOTING, sUPPORT, AND WARRANTY how state law relates to the warranty . THIS WARRANT Y CONTAINS THE SOLE WARRANT Y OF BELKIN . THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANT Y OR CONDITION OF QUALIT Y, MERCHANTABILIT Y OR FITN...
Page 46 - DECLARATION OF CONFORMIT Y WITh FCC RULEs; • Reorient or relocate the receiving antenna.
46 REGULATORY INFORMATION Fcc statement DECLARATION OF CONFORMIT Y WITh FCC RULEs FOR ELECTROMAGNETIC COMPATIBILIT Y We, Belkin International, Inc ., of 12045 E . Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the device, F9K1103 v1, complies with Part 15 of the ...
Page 47 - REGULATORY INFORMATION; For information on product disposal please refer to; European compliance statement:; Band N
47 REGULATORY INFORMATION For information on product disposal please refer to http://environmental .belkin .com European compliance statement: Belkin International hereby declares that this F9K1103 Wireless Dual- Band N + Router is in compliance with the essential requirements and other revelant pro...
