Belkin F1D104 - Manual

Make sure you have the right cables! The Omni View ™ SE requires cables to connect the eight computers you will be controlling. Below are the Belkin part numbers and their descriptions. Werecommend purchasing Cable Kits based on the type of mouse port your computeruses. Cable kits have all the cable...

1. Set the DIP switches. If you have only one Omni View ™ SE, use the MASTER bank setting. If the Omni View ™ SE you are using will be daisy-chained off another unit, use a unique slave setting. Please refer to the next section for more informationregarding multiple Omni View ™ SE units. PLEASE FOLL...

Hardware Installation (continued) 11. You can now power up all of your computers simultaneously. The first computer will show up on the monitor. Check to see if the keyboard and mouse work, as well as the image displayed on the screen. If this is okay, press the SELECT button and check the functiona...

10 Daisy-Chained Operation (continued) Adding Slave Units This assumes you already have a MASTER unit (or MASTER and slave units) set-up andworking properly. Below is the procedure of daisy-chaining a new slave unit. • Set the DIP switches of the slave unit to a unique slave BANK setting.• Connect t...

Cable 1 Cable 2 Cable 3 MASTER (Bank 0) slave (Bank 2) slave (Bank 3) Daisy-Chaining the OmniView ™ SE: slave (Bank 1) 11 Daisy-Chained Operation (continued)

12 Usage Keyboard "Hot” Key commands: You can also conveniently command the Omni View ™ SE to switch ports through simple keyboard key sequences. To send commands to the Omni View ™ SE, the SCROLL LOCK key must be pressed twice within 2 seconds. You will hear a beep forconfirmation. Below are th...

13 Usage (continued) You can switch directly to any port by giving the Omni View ™ SE the BANK and PORT numbers. For instance, if you press [SCROLL LOCK] [SCROLL LOCK] [2] [2], the com-puter on PORT 2 of the Omni View ™ SE set to BANK 2 will be selected. In the dia- gram below, that is PC # 8. Hence...

14 Troubleshooting General Problems: Q: When cascading, the MASTER unit does not see the slave unit(s).A: • Refer to the Hardware Installation section for information on how to properly connect the daisy-chain cable. • Make sure that the daisy-chain cable that you are using is the F1D108-CBL. Using ...

15 Troubleshooting (continued) Q: The computers boot up fine, but the mouse does not work.A: • Check the cables and make sure they are inserted properly in the correct ports.• Make sure the mouse works when directly plugged into the computer.Rebooting is necessary when trying this. If the mouse poin...

17 Information Contacting Belkin Components www.belkin.com FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-ference in a...