Belkin SE 2-Port - Manual - manualsarea.com

Page 3 - Technical Specifications

2 Technical Specifications Console Connectors: Keyboard: 6 pin MiniDIN female Mouse: 6 pin MiniDIN female (for PS/2 mouse)DB9 male (for spare serial mouse) Monitor: HDDB15 female Computer Port Connectors: Keyboard: 6 pin MiniDIN female Mouse: 6 pin MiniDIN female (for PS/2 mouse)DB9 male (for serial...

Page 4 - Product Detail; FRONT PANEL

3 Product Detail SLAVE INPUT DB25 Daisy-chain port MASTER INPUTSLAVE OUTPUT DB25 Daisy-chain port DC power jack DIP switches Optional serial mouse connector CONSOLE connectors Keyboard connector PS/2 mouse connector VGA monitor connector PC PORT connectors Serial mouse output Keyboard output PS/2 mo...

Page 5 - Make sure you have the right cables!; Individual Cables and Adapters:; List of Parts Needed

4 Make sure you have the right cables! The OmniView ™ SE requires cables to connect the eight computers you will be controlling. Below are the Belkin part numbers and their descriptions. We recommend purchasing CableKits based on the type of mouse port your computer uses. Cable kits have all the cab...

Page 6 - Hardware Installation

5 1. Set the DIP switches. If you have only one OmniView ™ SE, use the MASTER bank setting. If the OmniView ™ SE you are using will be daisy-chained off another unit, use a unique slave setting. Please refer to the next section for more information regardingmultiple OmniView ™ SE units. PLEASE FOLLO...

Page 9 - (SKIP IF YOU HAVE ONLY ONE OmniView; Usage

8 The OmniView ™ SE has the capability to be daisy-chained to additional units for control over more computers. Up to four OmniView ™ SE units can be daisy chained together, whether 2-Port, 4-Port, or a mixture of both. The example above shows two OmniView ™ SE 2-Port units and two OmniView ™ SE 4-P...

Page 11 - Adding Slave Units

10 Adding Slave Units This assumes you already have a MASTER unit (or MASTER and slave units) set-up andworking properly. Below is the procedure of daisy-chaining a new slave unit. • Set the DIP switches of the slave unit to a unique slave BANK setting. • Connect the computers using the same procedu...

Page 12 - Daisy-Chaining the OmniView

11 Cable 1 Cable 2 Cable 3 MASTER (Bank 0) slave (Bank 2) slave (Bank 3) Daisy-Chaining the OmniView ™ SE: slave (Bank 1) Usage (continued) P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 11

Page 14 - AutoScan Mode; Enable AutoScan mode

13 You can switch directly to any port by giving the OmniView ™ SE the BANK and PORT numbers. For instance, if you press [SCROLL LOCK] [SCROLL LOCK] [2] [2], the computer on PORT 2 of the OmniView ™ SE set to BANK 2 will be selected. In the diagram below, that is PC # 8. Hence, if you only have one ...

Page 15 - PS/2 Mouse Problems at the Console or Computers:; Troubleshooting

14 General Problems: Q: When cascading, the MASTER unit does not see the slave unit(s).A: • Refer to the Hardware Installation section for information on how to properly connect the daisy-chain cable. • Make sure that the daisy-chain cable that you are using is the F1D108-CBL. Using any other cable ...

Page 16 - Problems with computers using the serial mouse output:

15 Q: The computers boot up fine, but the mouse does not work.A: • Check the cables and make sure they are inserted properly in the correct ports.• Make sure the mouse works when directly plugged into the computer. Rebooting is necessary when trying this. If the mouse pointer still does not move, th...

Page 18 - Information

FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our soleresponsibility that the product: F1D102 to which this declaration relates:Complies with Part 15 of the FCC Rules. Operati...

Belkin SE 2-Port - Manual

Table of Contents:

Summary

Other Belkin Models