Belkin F1DS102L - Manuals

3 1 2 3 4 5 6 7 8 section Overview Equipment Requirements Operating SystemsOmniView SOHO KVM Switches with Audio are for use onCPUs using:Platforms • Windows ® 2000, XP, Vista ® , Server 2003 • DOS• Linux ® • Novell ® • Mac OS ® * X v10.x *with USB support Keyboard Supports 101-/102-/104-/107-key ke...

4 4 Overview Port Indicators KVM Soho VGA U-type 4 Port EnclosurePrint Graphics v.2.1 F1DS102L, F1DS104L front panel back panel KVM Soho DVI 4 Port EnclosurePrint Graphics v.2.1 F1DD102L, F1DD104L front panel back panel KVM Soho VGA T-type 4 Port EnclosurePrint Graphics v.2.1 F1DS102J, F1DS104J fron...

5 1 2 3 4 5 6 7 8 section 5 Overview Specifications Part No.: F1DS102L, F1DS104L Power: 9V, 1.1A DC adapter with center pin-positive polarity PCs Supported: 2 (F1DS102L), 4 (F1DS104L) Console Keyboard: USB Console Mouse: USB Monitor Supported: VGA and SVGA MultiSync, LCD Max Resolution: 2048x1536@85...

66 Installing the KVM Switch Pre-Configuration Where to Place the KVM Switch The compact size of the KVM Switch makes it perfect for desktop placement. Consider the following when deciding where to place the KVM Switch: whether or not you intend to use the direct-access port selectors; the length of...

7 1 2 3 4 5 6 7 8 section Installing the KVM Switch Connecting the KVM Switch The KVM Switch is a plug-and-play device for installation. For a quick start on installation and operation, please follow the instructions below for the setup sequence: Step 1 Connect the shared keyboard, monitor, and mous...

8 Installing the KVM Switch Audio and Microphone Connections Note: Speakers and microphones are not required for use of your KVM Switch. Connect the Audio 1. Using the audio cable attached to your speakers, connect the male 3.5mm plug to the lime audio jack in the “Console” section of the KVM Switch...

9 1 2 3 4 5 6 7 8 section Installing the KVM Switch Powering Up the Systems The KVM Switch must be powered up before the computers. Once all cables have been connected, power up the CPUs that are attached to the KVM Switch. All computers can be powered on simultaneously. The KVM Switch emulates a mo...

10 Using the KVM Switch Selecting a Computer Using Direct-Access Port Selectors You can directly select which computer you wish to control by pressing the corresponding direct-access port selector next to the appropriate port. The LED will be lit to indicate that the port is currently selected. • Pu...

11 1 2 3 4 5 6 7 8 section 11 11 section Using the KVM Switch Hot-Key Preceding Sequence Configuration For users who want to use a preceding sequence other than two consecutive Scroll Locks, there is also one convenient way to configure it. 1. Press “ScrLk” + “ScrLk” + H, and a beeping sound will si...

13 1 2 3 4 5 6 7 8 section Using the KVM Switch Switching the Audio/Mic The audio/mic is independent to the KVM Switch and can be switched independently. This means that if you are working on port 1 of the KVM Switch, you can be listening to your music on port 3. You can switch the audio/mic in two ...

14 Firmware-Upgrade Guide This firmware-upgradeable KVM Switch allows you to upgrade firmware contents whenever it is needed to enhance its compatibility to other devices or its functionality and performance. We offer both Windows and Mac versions of the upgrade utility. You can choose either one de...

15 1 2 3 4 5 6 7 8 section Firmware-Upgrade Guide Step 3. Power on the host PC and copy/download the firmware-upgrade utility, “Belkin Soho.exe”, and the firmware-upgrade file, “.blk”, from belkin.com/support. Activate the Firmware-Upgrade Utility Program Note: You should close any unnecessary runni...

16 Firmware-Upgrade Guide Connect your KVM Switch to the Host PC Step 5. Now press the first front-panel button on the KVM Switch until you hear three beeps. The KVM Switch has now entered into the upgrade mode. Step 6. Check to make sure the KVM cables from port 1 are connected to the host PC. Note...

17 1 2 3 4 5 6 7 8 section Firmware-Upgrade Guide Begin the File Upload Note: Before hitting the “Upgrade” button on the utility program, you should make sure that you are focused on port 1 of the KVM Switch where you have the computer connected. If not, switch to that computer before hitting the “U...

18 Firmware-Upgrade Guide Step 9. Finally, unplug the power cable from the back of the KVM Switch and all other cables from the KVM Switch, and perform a cold reset. Reconnect all the cables again to the KVM Switch. Now you can enjoy the newly added functionality and compatibility of the new firmwar...

19 1 2 3 4 5 6 7 8 section Firmware-Upgrade Guide Install and Activate the Firmware-Upgrade Utility Program Note: You should close any unnecessary running programs such as antivirus, system-monitoring, or automatic updates; otherwise, the stability of the system during the firmware-upgrade process m...

21 1 2 3 4 5 6 7 8 section Firmware-Upgrade Guide Connect your KVM Switch to the Mac Host Step 5. Press the first front-panel button on the KVM Switch until you hear three beeps. Now the KVM Switch has entered into the upgrade mode. Step 6. Check to make sure the KVM cables from port 1 are connected...

24 FAQs Which operating systems does the KVM Switch support? The KVM Switch will support any operating system that runs on a USB platform. It will also work with non-USB-enabled Sun TM and Mac operating systems using the appropriate adapter. Compatible operating systems include, but are not limited ...

26 Troubleshooting VIDEO Problem: I am getting ghosting, shadowing, or fuzzy images on my monitor. Solution: • Check that all video cables are inserted properly. • Check that the monitor you are using supports the resolution and refresh-rate setting on your computer. • Check that the graphics card y...

27 1 2 3 4 5 6 7 8 section 27 Troubleshooting KEYBOARD Problem: Computer does not detect keyboard and I get a keyboard error reported at boot up. Solution: • Check that the keyboard cable between the KVM Switch and the computer is connected properly. Tighten any loose connections. • Try swapping you...

28 Troubleshooting Problem: The mouse is not detected at boot up. Solution: • Check the cables and make sure that they are inserted properly. Problem: The computer boots up fine, but the mouse does not work. Solution: • Make sure it is plugged in properly.• Make sure the mouse works when directly pl...

29 1 2 3 4 5 6 7 8 section Troubleshooting Problem: I am connecting my computer to the SOHO KVM Switch via USB and my keyboard and mouse do not work. Solution: • Prior to connecting the SOHO KVM Switch, make sure that the HID USB driver is installed on each computer. (To install the HID USB driver, ...

30 Troubleshooting Firmware-Upgrade Troubleshooting Problem: The progress bar stops for a long time without any advancement. Solution: Press and hold down the first front-panel button until three beeps are heard, and click the upgrade button on the upgrade utility program. The firmware-upload proces...

31 1 2 3 4 5 5 7 8 section Information FCC Statement Declaration of Conformity with FCC Rules for Electromagnetic Compatibility We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products: F1DS102L, F1DS104L, to which this dec...

Belkin Tech Support US: 800-223-5546 ext. 2263 310-898-1100 ext. 2263UK: 0845 607 77 87Australia: 1800 235 546New Zealand: 0800 235 546Singapore: 65 64857620 Europe: www.belkin.com/support Belkin International, Inc. 501 West Walnut StreetLos Angeles, CA 90220, USA310-898-1100310-898-1111 fax Belkin ...