Belkin F1DB104P2 - Manuals

1 2 3 4 5 6 7 8 section 3 Overview Equipment Requirements Cables: Connecting the E Series KVM Switch to a computer requires a Belkin KVM Cable Kit.Belkin E Series Cable Kits:F1D9002-XX (PS/2-style)F1D9002x06 (PS/2-style) (-XX denotes length in feet) F1D9002-XX (PS/2-style)

4 Overview System Requirements OS Platforms The E Series KVM Switch is compatible with CPUs running on, but not limited to, the following OS platforms:• Windows ® NT ® , 2000, XP, Server 2003, or Vista TM • Microsoft ® DOS 5.x and above • Red Hat ® Linux ® 8.x and above • Novell ® NetWare ® 5.x Keyb...

1 2 3 4 5 6 7 8 section 5 Overview Unit Display Diagrams Front/Rear View of the 4-Port E Series KVM Switch: CONSOLE PC 4 PC 3 PC 2 PC 1 CONSOLE PC 2 PC 1 Front/Rear View of the 2-Port E Series KVM Switch: CONSOLE PC 4 PC 3 PC 2 PC 1 CONSOLE PC 2 PC 1 Direct-Access Port Selector Console Monitor Port ...

6 Overview Specifications Part No.: F1DB102P2, F1DB104P2 Enclosure: High-impact plastic Power: By PS/2 computer keyboard port; optional 5V DC, 1A power adapter, center-pin-positive polarity No. of Computers Supported: 2 and 4 respectively for 2- and 4-port models Monitors Supported: CRT and LCD (wit...

1 2 3 4 5 6 7 8 section 7 Installation Pre-Configuration Where to Place the KVM Switch The OmniView E Series KVM Switch is designed to sit on top of your desktop. Where you place the KVM Switch will be based on the location of your CPUs and the length of your cables. Consider the following when deci...

8 Installation Keyboard, Monitor, and Mouse Connections Connecting the Console Step 1 Connect the monitor to the E Series KVM Switch. Using the cable that is attached to your monitor, connect it to the HDDB15 female port on the rear left side of the E Series KVM Switch labeled “Console”. (Refer to d...

1 2 3 4 5 6 7 8 section 9 Installation Connecting Computers to the E Series KVM Switch Step 1 Make sure your computer is powered off. Step 2 Using the Belkin E Series Cable Kit for PS/2 (F1D9002x06), connect the VGA connector to the monitor port on your computer. (Refer to diagram below.) Step 3 Con...

10 Powering Up the Systems Verify that all computers connected to the E Series KVM Switch are powered on. If any connected computers have not been powered on, it is okay to do so at this time (computers can be powered on simultaneously). The E Series KVM Switch emulates both a mouse and keyboard on ...

section 1 2 3 4 5 6 7 8 11 Using your E Series KVM Switch Selecting a Computer Using the Selector Button You can directly select a connected computer by pressing the selector button or by using a hot-key command. The LED will be lit next to the number to indicate which port is currently selected. It...

12 Using your E Series KVM Switch Selecting a Computer Using Port-Selector Buttons You can directly select which computer you wish to control by pressing the direct-access port selector next to the corresponding port. The LED will illuminate to indicate the port is currently selected. LED Display Th...

section 1 2 3 4 5 6 7 8 13 Using your E Series KVM Switch Keyboard Hot-Key-Command Shortcut Reference Below is a complete list of hot-key commands that can be used for your E Series KVM Switch: Note: Each command needs to be preceded by “Scroll Lock”, “Scroll Lock”. Command Function Previous active ...

The mouse is lost when I switch to a different port. • Check that the mouse you are using is connected properly to the console port of the KVM Switch.• Tighten any loose cable connections.• If you are using a mouse driver that was included with your mouse, uninstall it and install the standard Micro...

1 2 3 4 5 6 7 8 section 17 Glossary The following definitions are used throughout this User Manual. AutoScan: A mode of operation where the KVM Switch scans from one port to another, on an ongoing basis, as configured by the user. Console: The all-in-one term for the keyboard, video monitor, and mou...

Information 18 18 FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the products: F1DB102P2, F1DB104P2 to which this declaration rela...

Information section 1 2 3 4 5 6 7 8 19 19 or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear...

P75583 RevB © 2010 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows, Windows Vista, NT, and Microsoft are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countri...