BEA Superscan - Manuals

75.1035 V1 Feb 2001 Page 3 of 8 COMMON INDUSTRIAL APPLICATIONS : DOORS WHERE OVERHEAD ACTIVATION SENSORS ARE NOT ABLE TO BE MOUNTED: For applications with limited mounting height using an IS-87 for activation for vehicles only, the SuperScan can be installed as shown to the left and wired in series ...

75.1035 V1 Feb 2001 Page 4 of 8 SUPERSCAN INSTALLATION PROCEDURES **B.E.A. sensors, as with all automatic door equipment, should be set up and inspected in accordance with applicable ANSI standards. Mounting the aluminum extrusion to a door jamb or wall. 1. Remove the screws and end caps and snap th...

75.1035 V1 Feb 2001 Page 5 of 8 ON SITE ADJUSTMENTS 1. Position of the Master and Slave Modules in the Aluminum Extrusion NOTE: RX = Receiver TX = Transmitter Please use the above diagrams for the terminology used to describe the installation of the SuperScans. The position of the master and slaves ...