BEA IS40P - Manual
BEA IS40P – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Sensor Tilt Angle; Precautions; Installation Tips; EI; W AL L MOUNT; MOUN
- Page 3 – Microwave Field Tilt Angle; Remote Control Functions; Unlock; Lock
- Page 4 – Remote Control Parameters; FUNCTION; Setup Sequence
- Page 5 – Description; PRESENCE RELAY
- Page 6 – SYMPTOMS; respond to the remote; Cut and restore power supply; Increase the sensor angle and/or
IS40 / IS40P
USER’S GUIDE
COMBINED ACTIVE INFRARED / MICROWAVE AND ACTIVE INFRARED ONLY SENSOR
- The IS40P uses Active Infrared (IR)
technology for presence detection only
and the activation relay can be triggered
by entering or exiting the IR field.
75.5371.01 EN 20080505 (75.5370)
Page 1 of 6
IS40P
IS40
LED INDICATORS
MICROWAVE FIELD ADJUSTMENT
DESCRIPTION
SPECIFICATION
TECHNOLOGY
MICROWAVE (IS40 Only)
INFRARED
RADIATED FREQUENCY
24.175 GHz
875nm
RADIATED POWER DENSITY
< 5 mW/cm²
< 250mW/m²
DETECTION MODE
Motion
Motion & Presence
MAXIMUM DETECTION FIELD
13’ x 16’ (4m x 5m)
(10’ x 10’) 3m x 3m
OUTPUT HOLD TIME
0.5 sec. to 9 sec.
0.5 sec.
REACTION TIME
100ms
250ms
MINIMUM TARGET SPEED
2 in/sec (5cm/sec) in sensor axis
0 in/sec (0cm/sec)
LED SIGNAL
Green
Red
ANTENNA TILT ANGLE
-8° to 22° (relative to sensor front face)
N/A
SENSOR TILT ANGLE
15° to 45°
SUPPLY VOLTAGE
12 to 24VAC ± 10%
12 to 24VDC +30% / -5%
MAIN FREQUENCY
50 to 60Hz
POWER CONSUMPTION
< 2W
RELAY OUTPUT
- Max. Voltage
- Max. Current
- Max Switching Power
2 Relays with switch-over contact (voltage free)
60 VDC / 125 VAC
1A (resistive)
30W (DC) / 60VA (AC)
INSTALLATION HEIGHT
8’ to 16’ (2.5m to 5m)
TEMPERATURE RANGE
-22°F ( -30°C) to + 140°F (60°C)
PROTECTION DEGREE
NEMA-4
NORM CONFORMITY
Electromagnetic compatibility (EMC) according to 2004/108/EEC, R&TTE: 1999/5/EC
DIMENSIONS (D X W X H)
5 in. X 4 in. X 3.75 in. (127mm x 102mm x 96mm)
MATERIAL
- Housing
- Face
ABS
Polycarbonate
COLOR
- Housing
- Face
Black
Transparent Purple
CABLE LENGTH
32 feet (10m)
1 Description
2 Specifications
“The Peak Of Detection”
- The IS40 uses
Microwave
technology for
activation and
Active Infrared
technology
for presence
detection.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Sensor Tilt Angle LABEL POWER (VAC / DC) ACTIVATION RELAY PRESENCE RELAY 12-24 12-24 COM NO NC COM NO NC COLOR RED BLACK WHITE GREEN YELLOW WHITE W/BLACK STRIPE GREEN W/BLACK STRIPE YELLOW W/BLACK STRIPE 3 Precautions This device IS NOT intended for use as a safety sensor. Shut off all power b...
75.5371.01 EN 20080505 (75.5370) Page 3 of 6 2 Microwave Field Tilt Angle - 3.25 6.50 9.75 13.0 19.7 23.0 26.3 16.3 3.25 0 3.25 6.50 6.50 ft ft Mounting height: 16 ft. Sensitivity: 9 Sensor angle: 20° - + MIN MAX By turning the tilt angle adjustment screw clockwise, the radar field angle is reduced....
Page 4 of 6 75.5371.01 EN 20080505 (75.5370) 2 Remote Control Parameters FUNCTION AFFECTS INFRARED OR MICROWAVE REMOTE CONTROL BUTTON FUNCTION DESCRIPTION AUTOMATIC LEARN TIME INFRARED 0: 30 seconds 1: 1 minute 2: 2 minutes 3: 5 minutes 4: 10 minutes 5: 20 minutes 6: 60 minutes 9: ∞ (Infi nity) IMMUN...
